???global.info.a_carregar???
Antonio Gloria received a Ph.D. degree in "Chemical, Materials and Production Engineering" from the University of Naples Federico II, Italy. Since 2011 he is Visiting Professor at the Centre for Rapid and Sustainable Product Development (CDRSP)- Polytechnic of Leiria, Portugal - and Associate Member of the CDRSP. He is Senior Researcher at the National Research Council of Italy-Institute of Polymers, Composites and Biomaterials (CNR-IPCB). Antonio Gloria is responsible for the laboratories of "Mechanical Properties" and "Reverse Engineering" at CNR-IPCB, and he was co-founder of the start-up "FASTISSUES" (srls) (development of 3D polymer-based and customized scaffolds for tissue engineering with tailored mechanical, biological and functional properties, using additive manufacturing and reverse engineering). He was Professor of "Biomaterials" at the University of Catanzaro "Magna Graecia" - Italy, Professor of "Artificial Organs and Prostheses", "Materials Science and Technology", "Fundamentals of Chemistry and Biomaterials" and "Biomaterials" at the University of Naples Federico II. He was involved in several national and international projects. He was member of the European Society for Biomaterials, the Italian Society of Biomaterials, the American Chemical Society and full member of the American Nano Society. As a member of the "Italian Society of Biomechanics in Orthopedics and Traumatology", in October 2013 he was appointed as Scientific Advisor/Counselor and he is also Treasurer since January 2016. He is also member of the Italian Association of Design Methods and Tools for Industrial Engineering. He received many national and international awards (e.g. Best Paper Award from the organising committee of the 4th International Conference on Advanced Research in Virtual and Rapid Prototyping VR@P - October 2009, Leiria, Portugal - for the paper presented on the biomanufacturing session entitled "BioExtruder: study of the influence of process parameters on PCL scaffolds properties" - authors: M. Domingos, F. Chiellini, A. Gloria, et al. - contribution as co-author). Antonio Gloria was awarded and appointed as "Future Leader" in Science and Technology ("Dialogue between Nobel Laureates and Future Leaders", STS forum " October 2015, Kyoto, Japan). He gave also invited lectures at international conferences, workshops and seminars. He supervised PhD students and MD students at the University of Naples Federico II and at the CDRSP. His works deal with: design and preparation of polymeric and polymer-based micro/nano-composite scaffolds using "conventional" and additive manufacturing techniques; morphological, mechanical, biological and functional analysis of scaffolds for tissue engineering; modelling/simulation and image analysis; design, preparation and characterization of injectable gels and semi-IPNs; characterization of devices and biological tissues at macro-, micro- and nano-level; design and optimization of polymeric and composite devices for several kinds of applications. In 2016 he was appointed as member of the Scientific Advisory Board of the Fraunhofer International Joint Laboratory IDEAS - University of Naples Federico II and member of The Royal Society (UK) - International Exchanges Committee in January 2020. His main research interests include: Design for Additive Manufacturing, Reverse Engineering, Design of Additive Manufactured Magnetic Scaffolds, Magnetic Stimulation, 3D/4D Printing, Reverse Engineering, Modeling, Biomaterials, Tissue Engineering, Biomechanics, Biomimetics and Bioinspiration, Nanomaterials, Design of Experiments, Mechanical Analysis, Materials Properties, Design Methods and Manufacturing, Materials Science and Technology. He is currently author of international papers, book chapters, books, communications/contributions in international and national conferences. He is also reviewer and Editorial Board Member of international scientific journals.
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Antonio Gloria

Nomes de citação

  • Gloria, Antonio

Identificadores de autor

Ciência ID
E11C-E2EC-F3BC
ORCID iD
0000-0001-5233-5687

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais
  • Ciências Médicas e da Saúde - Biotecnologia Médica - Biomateriais
  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais - Engenharia dos Materiais
  • Ciências Naturais - Ciências Biológicas - Biologia Celular
  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Italiano (Idioma materno)
Inglês Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2)
Formação
Grau Classificação
2006
Concluído
 Ph.D. degree in Chemical, Materials and Production Engineering (Título de especialista)
Università degli Studi di Napoli Federico II, Itália
2002/12
Concluído
 Materials Engineering (Laurea Magistrale)
Università degli Studi di Napoli Federico II, Itália
Percurso profissional

Ciência

Categoria Profissional
Instituição de acolhimento 		Empregador
2011 - Atual Investigador (Investigação) Institute of Polymers, Composites and Biomaterials - National Research Council of Italy (IPCB-CNR), Itália
2011 - Atual Investigador visitante (Investigação) Instituto Politécnico de Leiria, Portugal
Projetos

Bolsa

Designação Financiadores
2017/01/30 - 2020/03/31 Magnetic Diagnostic Assay for neurodegenerative diseases" (MADIA)
732678
Orientador
EU Framework Programme for Research and Innovation ICT Leadership in Enabling and Industrial Technologies
Concluído
2014/05/21 - 2017/04/30 "Development of Biomaterial-based Delivery Systems for Ischemic Conditions: An Integrated Pan-European Approach"
317304
Orientador
2014/06/26 - 2015/10/31 Nanostructured Hydrogels for Controlled Release of Engineered Therapeutic Proteins Against Parkinson’s Disease - Related Neurodegeneration”
Riferimento pratica 2011-0335
Orientador
2015 - 2015 N-CHEM "Nanomax-integrable sensors for pathological biomarkers diagnosis". "Progetto Bandiera" NANOMAX - "Task 5.3 Cell-material interactions"
"Progetto Bandiera" NANOMAX
Orientador
2012/11/01 - 2014/03/31 "BIOCOMP-RB: Nuova generazione di Rigit Inflatable Boats (RIB) realizzata in biocompositi"
A16/002087/02/X 17
Orientador
2011/02 - 2012/10/31 "Novel biofunctional highly porous polymer scaffolds and techniques controlling angiogenesis for the regeneration and repair of the degenerated intervertebral disc" (DISC REGENERATION) - Research and management activities of Work Package 3
Grant agreement no. NMP3-LA-2008-213904
Orientador
2012 - 2012 "Cadaver-Lab Session", in the frame of the project "DISC REGENERATION" ("Novel biofunctional highly porous polymer scaffolds and techniques controlling angiogenesis for the regeneration and repair of the degenerated intervertebral disc"
NMP3-LA-2008-213904
Orientador

Projeto

Designação Financiadores
2013/10/22 - 2017 "Design of Multifunctional Bioactive hydrogel" in the frame of the project "Development of Biomaterial-based Delivery Systems for Ischemic Conditions: An Integrated Pan-European Approach" - AngioMatTrain, Marie Curie Industry-Initial Training Network (ITN) - FP7-PEOPLE-2012-ITN - Grant Agreem
317304
Orientador

Outro

Designação Financiadores
2021/06/10 - 2024/12/31 Design for Additive Manufacturing
DCM.AD006.336
Investigador responsável
Em curso
2015/06/01 - 2015/09/30 Secondment of Early Stage Researcher 4 in the frame of Development of Biomaterial-based Delivery Systems for Ischemic Conditions: An Integrated Pan-European Approach
317304
Orientador
Produções

Publicações

Artigo em conferência
  1. Martorelli, M.; Speranza, D.; Ferraro, P.; Genovese, A.; Gloria, A.; Pagliarulo, V.. "Optical characterizations of airless radial tire". 2020.
    10.1109/MetroAeroSpace48742.2020.9160146
  2. Fucile, P.; Papallo, I.; Improta, G.; De Santis, R.; Gloria, A.; Onofrio, I.; D'Anto, V.; Maietta, S.; Russo, T.. "Reverse Engineering and Additive Manufacturing towards the design of 3D advanced scaffolds for hard tissue regeneration". 2019.
    10.1109/METROI4.2019.8792891
  3. Cascone, F.D.; Martorelli, M.; Gloria, A.; Nathan-Roberts, D.; Lanzotti, A.. "Towards Adaptive Switches through implementation of visual feedback in assistive devices". 2019.
    10.1109/METROI4.2019.8792893
  4. Cascone, F.D.; Martorelli, M.; Gloria, A.; Papa, S.; Lanzotti, A.. "Towards the development of interfaces for students with speech disorder and motor impairments". 2019.
    10.1016/j.promfg.2020.01.058
  5. Rocco, N.; Nava, M.B.; Catanuto, G.; Accurso, A.; Martorelli, M.; Oliviero, O.; Improta, G.; et al. "Additive manufacturing and tissue engineering to improve outcomes in breast reconstructive surgery". 2019.
    10.1109/METROI4.2019.8792910
  6. Solari, D.; Cavallo, L.M.; Cappabianca, P.; Onofrio, I.; Papallo, I.; Brunetti, A.; Ugga, L.; et al. "Skull base reconstruction after endoscopic endonasal surgery: New strategies for raising the dam". 2019.
    10.1109/METROI4.2019.8792878
  7. Cascone, F.D.; Gironimo, G.D.; Gloria, A.; Martorelli, M.; Lanzotti, A.. "An intuitive hardware layout for personalized augmentative and alternative communication systems". 2019.
  8. Lanzotti, A.; Martorelli, M.; Maietta, S.; Gerbino, S.; Penta, F.; Gloria, A.. "A comparison between mechanical properties of specimens 3D printed with virgin and recycled PLA". 2019.
    10.1016/j.procir.2019.02.030
  9. Lanzotti, A.; Martorelli, M.; Papa, S.; Sicignano, G.; Pepino, A.; Orrei, S.; Ciaramella, S.; et al. "Participatory design of a personalized device for a student with spastic quadriplegia at federico ii". 2018.
    10.3233/978-1-61499-898-3-339
  10. De Santis, R.; Gloria, A.; Russo, T.; Ronca, A.; D'Amora, U.; Negri, G.; Ronca, D.; Ambrosio, L.. "Viscoelastic Properties of Rapid Prototyped Magnetic Nanocomposite Scaffolds for Osteochondral Tissue Regeneration". 2016.
    10.1016/j.procir.2015.07.037
  11. Rocco, N.; Gloria, A.; De Santis, R.; Catanuto, G.; Nava, M.B.; Accurso, A.. "Improving Outcomes in Breast Reconstruction: From Implant - based Techniques towards Tissue Regeneration". 2016.
    10.1016/j.procir.2015.07.023
  12. Ronca, D.; Langella, F.; Chierchia, M.; D'Amora, U.; Russo, T.; Domingos, M.; Gloria, A.; Bartolo, P.; Ambrosio, L.. "Bone Tissue Engineering: 3D PCL-based Nanocomposite Scaffolds with Tailored Properties". 2016.
    10.1016/j.procir.2015.07.028
  13. Catauro, M.; Bollino, F.; Gloria, A.. "Sol-gel silica-based nanocomposites containing a high PEG amount: Chemical characterization and study of biological properties". 2016.
    10.1063/1.4949678
  14. Catauro, M.; Bollino, F.; Gloria, A.. "Sol-gel synthesis and characterization of SiO2/PEG hybrid materials containing quercetin as implants with antioxidant properties". 2016.
    10.1063/1.4949671
  15. Gloria, A.; Russo, T.; Rodrigues, D.F.L.; D'Amora, U.; Colella, F.; Improta, G.; Triassi, M.; De Santis, R.; Ambrosio, L.. "From 3D Hierarchical Scaffolds for Tissue Engineering to Advanced Hydrogel-Based and Complex Devices for in situ Cell or Drug Release". 2016.
    10.1016/j.procir.2015.07.036
  16. Rocco, N.; Gloria, A.; De Santis, R.; Catanuto, G.; Nava, M.B.; Accurso, A.. "Improving Outcomes in Breast Reconstruction: From Implant-Based Techniques Towards Tissue Regeneration". 2016.
    10.1016/j.procir.2015.11.012
  17. Martorelli, M.; Maietta, S.; Gloria, A.; De Santis, R.; Pei, E.; Lanzotti, A.. "Design and Analysis of 3D Customized Models of a Human Mandible". 2016.
    10.1016/j.procir.2015.11.016
  18. Patrício, T.; Domingos, M.; Gloria, A.; Bártolo, P.. "Characterisation of PCL and PCL/PLA scaffolds for tissue engineering". 2013.
    10.1016/j.procir.2013.01.022
  19. Russo, T.; D'Amora, U.; Gloria, A.; Tunesi, M.; Sandri, M.; Rodilossi, S.; Albani, D.; et al. "Systematic analysis of injectable materials and 3D rapid prototyped magnetic scaffolds: From CNS applications to soft and hard tissue repair/regeneration". 2013.
    10.1016/j.proeng.2013.05.116
  20. Santis, R.D.; Gloria, A.; Russo, T.; D'Amora, U.; D'Antò, V.; Bollino, F.; Catauro, M.; et al. "PCL loaded with sol-gel synthesized organic-inorganic hybrid fillers: From the analysis of 2D substrates to the design of 3D rapid prototyped composite scaffolds for tissue engineering". 2012.
    10.1063/1.4738387
  21. Serroni, G.; Bitondo, C.; Astarita, A.; Scala, A.; Gloria, A.; Prisco, U.; Squillace, A.; Bellucci, F.. "A comparison between mechanical and electrochemical tests on Ti6Al4V welded by LBW". 2011.
    10.1063/1.3589711
  22. Tsaryk, R.; Gloria, A.; De Santis, R.; Ghanaati, S.; Landes, C.; Unger, R.E.; Ambrosio, L.; Kirkpatrick, C.J.. "Cell-loaded semi-interpenetrating collagen-LMW HA gel for nucleus pulposus regeneration". 2011.
  23. Russo, L.; Lupo, C.; Gloria, A.; De Santis, R.; Cipolla, L.; Nicotra, F.. "PCL grafting with small biomolecules". 2011.
  24. Gloria, A.; Dessì, M.; De Santis, R.; Ambrosio, L.. "Injectable collagen-LMW HA gels loaded with gelatin microspheres as nucleus pulposus substitutes". 2011.
  25. De Santis, R.; Gloria, A.; Russo, T.; D'Amora, U.; Zeppetelli, S.; Ambrosio, L.. "An approach in developing 3D fiber-deposited magnetic scaffolds for tissue engineering". 2010.
    10.1063/1.3455657
  26. Domingos, M.; Chiellini, F.; Gloria, A.; Ambrosio, L.; Bartolo, P.; Chiellini, E.. "BioExtruder: Study of the influence of process parameters on PCL scaffolds properties". 2010.
  27. De Santis, R.; Prisco, D.; Gloria, A.; Rengo, S.; Ambrosio, L.. "Development of light curing process to improve mechanical properties of dental composites". 2008.
  28. Gloria, A.; De Santis, R.; Ambrosio, L.. "Novel polymer-based scaffolds and technologies for meniscus regeneration". 2008.
  29. Mollica, F.; De Santis, R.; Gloria, A.; Ambrosio, L.. "Characterization and simulation of PCL scaffolds for bone tissue engineering". 2008.
  30. Ronca, A.; Dessi, M.; Guarino, V.; Gloria, A.; Raucci, M.G.; Ambrosio, L.. "Use of poly-e-caprolactone as potential tissue engineering material". 2008.
    10.1063/1.2989000
Artigo em revista
  1. Peluso, Valentina; Rinaldi, Laura; Russo, Teresa; Oliviero, Olimpia; Di Vito, Anna; Garbi, Corrado; Giudice, Amerigo; et al. "Impact of Magnetic Stimulation on Periodontal Ligament Stem Cells". International Journal of Molecular Sciences 23 1 (2021): 188. http://dx.doi.org/10.3390/ijms23010188.
    10.3390/ijms23010188
  2. Russo, Teresa; Peluso, Valentina; Fucile, Pierpaolo; De Santis, Roberto; Gloria, Antonio. "Magnetism in Dentistry: Review and Future Perspectives". Applied Sciences 12 1 (2021): 95. http://dx.doi.org/10.3390/app12010095.
    10.3390/app12010095
  3. Dal Sasso, Eleonora; Zamuner, Annj; Filippi, Andrea; Romanato, Filippo; Palmosi, Tiziana; Vedovelli, Luca; Gregori, Dario; et al. "Covalent functionalization of decellularized tissues accelerates endothelialization". Bioactive Materials 6 11 (2021): 3851-3864. http://dx.doi.org/10.1016/j.bioactmat.2021.04.003.
    10.1016/j.bioactmat.2021.04.003
  4. Higuera, Gustavo A.; Ramos, Tiago; Gloria, Antonio; Ambrosio, Luigi; Di Luca, Andrea; Pechkov, Nicholas; de Wijn, Joost R.; van Blitterswijk, Clemens A.; Moroni, Lorenzo. "PEOT/PBT Polymeric Pastes to Fabricate Additive Manufactured Scaffolds for Tissue Engineering". Frontiers in Bioengineering and Biotechnology 9 (2021): http://dx.doi.org/10.3389/fbioe.2021.704185.
    10.3389/fbioe.2021.704185
  5. De Santis, Roberto; Papallo, Ida; Onofrio, Ilaria; Peluso, Valentina; Gallicchio, Vito; Rega, Andrea; D'Antò, Vincenzo; et al. "Analyzing the Role of Magnetic Features in Additive Manufactured Scaffolds for Enhanced Bone Tissue Regeneration". Macromolecular Symposia 396 1 (2021): 2000314. http://dx.doi.org/10.1002/masy.202000314.
    10.1002/masy.202000314
  6. Bazzolo, B.; Sieni, E.; Zamuner, A.; Roso, M.; Russo, T.; Gloria, A.; Dettin, M.; Conconi, M.T.. "Breast cancer cell cultures on electrospun poly(e-caprolactone) as a potential tool for preclinical studies on anticancer treatments". Bioengineering 8 1 (2021): 1-16. http://www.scopus.com/inward/record.url?eid=2-s2.0-85099655679&partnerID=MN8TOARS.
    10.3390/bioengineering8010001
  7. Cometa, S.; Bonifacio, M.A.; Tranquillo, E.; Gloria, A.; Domingos, M.; De Giglio, E.. "A 3d printed composite scaffold loaded with clodronate to regenerate osteoporotic bone: In vitro characterization". Polymers 13 1 (2021): 1-17. http://www.scopus.com/inward/record.url?eid=2-s2.0-85099036722&partnerID=MN8TOARS.
    10.3390/polym13010150
  8. De Santis, R.; Russo, T.; Rau, J.V.; Papallo, I.; Martorelli, M.; Gloria, A.. "Design of 3d additively manufactured hybrid structures for cranioplasty". Materials 14 1 (2021): 1-15. http://www.scopus.com/inward/record.url?eid=2-s2.0-85098751655&partnerID=MN8TOARS.
    10.3390/ma14010181
  9. Fucile, P.; Russo, T.; De Santis, R.; Martorelli, M.; Catauro, M.; Gloria, A.. "Integrated Design Strategy for Additively Manufactured Scaffolds in Tissue Engineering". Macromolecular Symposia 395 1 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85100861101&partnerID=MN8TOARS.
    10.1002/masy.202000263
  10. De Santis, R.; Russo, T.; Fucile, P.; Martorelli, M.; Catauro, M.; Gloria, A.. "Photo-Curing 3D Printing and Innovative Design of Porous Composite Structures for Biomedical Applications". Macromolecular Symposia 395 1 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85100843106&partnerID=MN8TOARS.
    10.1002/masy.202000234
  11. Rocco, N.; Montagna, G.; Criscitiello, C.; Nava, M.B.; Privitera, F.; Taher, W.; Gloria, A.; Catanuto, G.. "Nipple sparing mastectomy as a risk-reducing procedure for brca-mutated patients". Genes 12 2 (2021): 1-7. http://www.scopus.com/inward/record.url?eid=2-s2.0-85100916135&partnerID=MN8TOARS.
    10.3390/genes12020253
  12. Liccardo, Annalisa; Arpaia, Pasquale; Bonavolonta, Francesco; Caputo, Enzo; de Pandi, Francesco; Gallicchio, Vito; Gloria, Antonio; Moriello, Rosario Schiano Lo. "An Augmented Reality Approach to Remote Controlling Measurement Instruments for Educational Purposes During Pandemic Restrictions". IEEE Transactions on Instrumentation and Measurement 70 (2021): 1-20. http://dx.doi.org/10.1109/tim.2021.3101314.
    10.1109/tim.2021.3101314
  13. Fucile, P.; Onofrio, I.; Papallo, I.; Gallicchio, V.; Rega, A.; D'Antò, V.; Improta, G.; et al. "Strategies for the design of additively manufactured nanocomposite scaffolds for hard tissue regeneration". Acta IMEKO 9 4 (2020): 53-59. http://www.scopus.com/inward/record.url?eid=2-s2.0-85098190671&partnerID=MN8TOARS.
    10.21014/acta_imeko.v9i4.739
  14. Moxon, S.R.; Ferreira, M.J.S.; dos Santos, P.; Popa, B.; Gloria, A.; Katsarava, R.; Tugushi, D.; et al. "A preliminary evaluation of the pro-chondrogenic potential of 3D-bioprinted poly(ester urea) scaffolds". Polymers 12 7 (2020): 1-15. http://www.scopus.com/inward/record.url?eid=2-s2.0-85088313057&partnerID=MN8TOARS.
    10.3390/polym12071478
  15. Ausiello, P.; Gloria, A.; Maietta, S.; Watts, D.C.; Martorelli, M.. "Stress distributions for hybrid composite endodontic post designs with and without a ferrule: FEA study". Polymers 12 8 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85090799589&partnerID=MN8TOARS.
    10.3390/polym12081836
  16. Solari, D.; Papallo, I.; Ugga, L.; Cavallo, L.M.; Onofrio, I.; Cuocolo, R.; Improta, G.; et al. "Novel concepts and strategies in skull base reconstruction after endoscopic endonasal surgery". Acta IMEKO 9 4 (2020): 67-73. http://www.scopus.com/inward/record.url?eid=2-s2.0-85098191587&partnerID=MN8TOARS.
    10.21014/acta_imeko.v9i4.745
  17. Ullah, I.; Gloria, A.; Zhang, W.; Ullah, M.W.; Wu, B.; Li, W.; Domingos, M.; Zhang, X.. "Synthesis and Characterization of Sintered Sr/Fe-Modified Hydroxyapatite Bioceramics for Bone Tissue Engineering Applications". ACS Biomaterials Science and Engineering 6 1 (2020): 375-388. http://www.scopus.com/inward/record.url?eid=2-s2.0-85077130698&partnerID=MN8TOARS.
    10.1021/acsbiomaterials.9b01666
  18. Martorelli, M.; Gloria, A.; Bignardi, C.; Calì, M.; Maietta, S.. "Design of Additively Manufactured Lattice Structures for Biomedical Applications". Journal of Healthcare Engineering 2020 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85080909661&partnerID=MN8TOARS.
    10.1155/2020/2707560
  19. Gloria, A.; Russo, T.; D’Amora, U.; Santin, M.; De Santis, R.; Ambrosio, L.. "Customised multiphasic nucleus/annulus scaffold for intervertebral disc repair/regeneration". Connective Tissue Research 61 2 (2020): 152-162. http://www.scopus.com/inward/record.url?eid=2-s2.0-85070793922&partnerID=MN8TOARS.
    10.1080/03008207.2019.1650037
  20. Grimaldi, M.; Buonocore, M.; Scrima, M.; Stillitano, I.; D’Errico, G.; Santoro, A.; Amodio, G.; et al. "NMR structure of the FIV gp36 C-terminal heptad repeat and membrane-proximal external region". International Journal of Molecular Sciences 21 6 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85081695625&partnerID=MN8TOARS.
    10.3390/ijms21062037
  21. Russo, T.; Peluso, V.; Gloria, A.; Oliviero, O.; Rinaldi, L.; Improta, G.; De Santis, R.; D’antò, V.. "Combination design of time-dependent magnetic field and magnetic nanocomposites to guide cell behavior". Nanomaterials 10 3 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85082665667&partnerID=MN8TOARS.
    10.3390/nano10030577
  22. Zhang, Y.; Ullah, I.; Zhang, W.; Ou, H.; Domingos, M.; Gloria, A.; Zhou, J.; Li, W.; Zhang, X.. "Preparation of electrospun nanofibrous polycaprolactone scaffolds using nontoxic ethylene carbonate and glacial acetic acid solvent system". Journal of Applied Polymer Science 137 8 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85070274842&partnerID=MN8TOARS.
    10.1002/app.48387
  23. Goranov, V.; Shelyakova, T.; De Santis, R.; Haranava, Y.; Makhaniok, A.; Gloria, A.; Tampieri, A.; et al. "3D Patterning of cells in Magnetic Scaffolds for Tissue Engineering". Scientific Reports 10 1 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85079210662&partnerID=MN8TOARS.
    10.1038/s41598-020-58738-5
  24. Russo, T.; de Santis, R.; Gloria, A.; Barbaro, K.; Altigeri, A.; Fadeeva, I.V.; Rau, J.V.. "Modification of PMMA cements for cranioplasty with bioactive glass and copper doped tricalcium phosphate particles". Polymers 12 1 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85078404636&partnerID=MN8TOARS.
    10.3390/polym12010037
  25. Rocco, N.; Papallo, I.; Nava, M.B.; Catanuto, G.; Accurso, A.; Onofrio, I.; Oliviero, O.; et al. "Additive manufacturing and technical strategies for improving outcomes in breast reconstructive surgery". Acta IMEKO 9 4 (2020): 74-79. http://www.scopus.com/inward/record.url?eid=2-s2.0-85098121791&partnerID=MN8TOARS.
    10.21014/acta_imeko.v9i4.754
  26. Calvanese, L.; Brun, P.; Messina, G.M.L.; Russo, T.; Zamuner, A.; Falcigno, L.; D'Auria, G.; et al. "EAK Hydrogels Cross-Linked by Disulfide Bonds: Cys Number and Position Are Matched to Performances". ACS Biomaterials Science and Engineering 6 2 (2020): 1154-1164. http://www.scopus.com/inward/record.url?eid=2-s2.0-85078538544&partnerID=MN8TOARS.
    10.1021/acsbiomaterials.9b01556
  27. Gloria, A.; Montanari, R.; Richetta, M.; Varone, A.. "Alloys for aeronautic applications: State of the art and perspectives". Metals 9 6 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85068479379&partnerID=MN8TOARS.
    10.3390/met9060662
  28. Bordoni, D.; Cadenelli, P.; Ornelli, M.; Falco, G.; Accurso, A.; Gloria, A.; Maietta, S.; Rocco, N.; Magalotti, C.. "The axillary flap in oncoplastic resection of breast cancers located in the upper-outer quadrants: A new surgical technique". BMC Surgery 18 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85065335777&partnerID=MN8TOARS.
    10.1186/s12893-018-0467-3
  29. Gloria, A.; Martorelli, M.; Gerbino, S.; Tagliaferri, F.; Kräusel, V.; Lanzotti, A.. "Functional analyses to assess the effect of the curing process on the properties of light activated composites". Production Engineering 13 2 (2019): 239-246. http://www.scopus.com/inward/record.url?eid=2-s2.0-85065486125&partnerID=MN8TOARS.
    10.1007/s11740-019-00895-2
  30. Scialla, S.; Barca, A.; Palazzo, B.; D'Amora, U.; Russo, T.; Gloria, A.; De Santis, R.; et al. "Bioactive chitosan-based scaffolds with improved properties induced by dextran-grafted nano-maghemite and l-arginine amino acid". Journal of Biomedical Materials Research - Part A 107 6 (2019): 1244-1252. http://www.scopus.com/inward/record.url?eid=2-s2.0-85061438026&partnerID=MN8TOARS.
    10.1002/jbm.a.36633
  31. Gloria, A.; Frydman, B.; Lamas, M.L.; Serra, A.C.; Martorelli, M.; Coelho, J.F.J.; Fonseca, A.C.; Domingos, M.. "The influence of poly(ester amide) on the structural and functional features of 3D additive manufactured poly(e-caprolactone) scaffolds". Materials Science and Engineering C 98 (2019): 994-1004. http://www.scopus.com/inward/record.url?eid=2-s2.0-85060082111&partnerID=MN8TOARS.
    10.1016/j.msec.2019.01.063
  32. Gloria, A.; Maietta, S.; Richetta, M.; Ausiello, P.; Martorelli, M.. "Metal posts and the effect of material–shape combination on the mechanical behavior of endodontically treated anterior teeth". Metals 9 2 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85069891335&partnerID=MN8TOARS.
    10.3390/met9020125
  33. Maietta, S.; Gloria, A.; Improta, G.; Richetta, M.; De Santis, R.; Martorelli, M.. "A further analysis on Ti6Al4V lattice structures manufactured by selective laser melting". Journal of Healthcare Engineering 2019 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85073245490&partnerID=MN8TOARS.
    10.1155/2019/3212594
  34. Tunesi, M.; Raimondi, I.; Russo, T.; Colombo, L.; Micotti, E.; Brandi, E.; Cappelletti, P.; et al. "Hydrogel-based delivery of Tat-fused protein Hsp70 protects dopaminergic cells in vitro and in a mouse model of Parkinson’s disease". NPG Asia Materials 11 1 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85067355403&partnerID=MN8TOARS.
    10.1038/s41427-019-0128-8
  35. De Santis, R.; Gloria, A.; Viglione, S.; Maietta, S.; Nappi, F.; Ambrosio, L.; Ronca, D.. "3D laser scanning in conjunction with surface texturing to evaluate shift and reduction of the tibiofemoral contact area after meniscectomy". Journal of the Mechanical Behavior of Biomedical Materials 88 (2018): 41-47. http://www.scopus.com/inward/record.url?eid=2-s2.0-85051632608&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2018.08.007
  36. De Santis, R.; Gloria, A.; Maietta, S.; Martorelli, M.; De Luca, A.; Spagnuolo, G.; Riccitiello, F.; Rengo, S.. "Mechanical and thermal properties of dental composites cured with CAD/CAM assisted solid-state laser". Materials 11 4 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85044835586&partnerID=MN8TOARS.
    10.3390/ma11040504
  37. Ronca, A.; Ronca, S.; Forte, G.; Zeppetelli, S.; Gloria, A.; De Santis, R.; Ambrosio, L.. "Synthesis and characterization of divinyl-fumarate poly-e-caprolactone for scaffolds with controlled architectures". Journal of Tissue Engineering and Regenerative Medicine 12 1 (2018): e523-e531. http://www.scopus.com/inward/record.url?eid=2-s2.0-85017355760&partnerID=MN8TOARS.
    10.1002/term.2322
  38. D'Amora, U.; D'Este, M.; Eglin, D.; Safari, F.; Sprecher, C.M.; Gloria, A.; De Santis, R.; Alini, M.; Ambrosio, L.. "Collagen density gradient on three-dimensional printed poly(e-caprolactone) scaffolds for interface tissue engineering". Journal of Tissue Engineering and Regenerative Medicine 12 2 (2018): 321-329. http://www.scopus.com/inward/record.url?eid=2-s2.0-85042132033&partnerID=MN8TOARS.
    10.1002/term.2457
  39. Calì, M.; Oliveri, S.M.; Cella, U.; Martorelli, M.; Gloria, A.; Speranza, D.. "Mechanical characterization and modeling of downwind sailcloth in fluid-structure interaction analysis". Ocean Engineering 165 (2018): 488-504. http://www.scopus.com/inward/record.url?eid=2-s2.0-85053078564&partnerID=MN8TOARS.
    10.1016/j.oceaneng.2018.07.011
  40. Penta, F.; Amodeo, G.; Gloria, A.; Martorelli, M.; Odenwald, S.; Lanzotti, A.. "Low-velocity impacts on a polymeric foam for the passive safety improvement of sports fields: Meshless approach and experimental validation". Applied Sciences (Switzerland) 8 7 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85050386259&partnerID=MN8TOARS.
    10.3390/app8071174
  41. Maietta, S.; Russo, T.; De Santis, R.; Ronca, D.; Riccardi, F.; Catauro, M.; Martorelli, M.; Gloria, A.. "Further theoretical insight into the mechanical properties of polycaprolactone loaded with organic-inorganic hybrid fillers". Materials 11 2 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85042377445&partnerID=MN8TOARS.
    10.3390/ma11020312
  42. Staiano, G.; Gloria, A.; Ausanio, G.; Lanzotti, A.; Pensa, C.; Martorelli, M.. "Experimental study on hydrodynamic performances of naval propellers to adopt new additive manufacturing processes". International Journal on Interactive Design and Manufacturing 12 1 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-84979516823&partnerID=MN8TOARS.
    10.1007/s12008-016-0344-1
  43. De Santis, R.; Russo, T.; Gloria, A.. "An analysis on the potential of diode-pumped solid-state lasers for dental materials". Materials Science and Engineering C 92 (2018): 862-867. http://www.scopus.com/inward/record.url?eid=2-s2.0-85050093719&partnerID=MN8TOARS.
    10.1016/j.msec.2018.07.051
  44. Maietta, S.; De Santis, R.; Catauro, M.; Martorelli, M.; Gloria, A.. "Theoretical design of multilayer dental posts using CAD-based approach and sol-gel chemistry". Materials 11 5 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85046679108&partnerID=MN8TOARS.
    10.3390/ma11050738
  45. Gloria, A.; Maietta, S.; Martorelli, M.; Lanzotti, A.; Watts, D.C.; Ausiello, P.. "FE analysis of conceptual hybrid composite endodontic post designs in anterior teeth". Dental Materials 34 7 (2018): 1063-1071. http://www.scopus.com/inward/record.url?eid=2-s2.0-85046136326&partnerID=MN8TOARS.
    10.1016/j.dental.2018.04.004
  46. Gargiulo, N.; De Santis, R.; Gloria, A.; Caputo, D.. "Composites for bone tissue engineering based on antibacterial mesoporous bioactive glassy oxides". Advanced Science Letters 23 6 (2017): 6023-6025. http://www.scopus.com/inward/record.url?eid=2-s2.0-85027876645&partnerID=MN8TOARS.
    10.1166/asl.2017.9098
  47. Ausiello, P.; Ciaramella, S.; Garcia-Godoy, F.; Gloria, A.; Lanzotti, A.; Maietta, S.; Martorelli, M.. "The effects of cavity-margin-angles and bolus stiffness on the mechanical behavior of indirect resin composite class II restorations". Dental Materials 33 1 (2017): e39-e47. http://www.scopus.com/inward/record.url?eid=2-s2.0-85007193580&partnerID=MN8TOARS.
    10.1016/j.dental.2016.11.002
  48. Ausiello, P.; Ciaramella, S.; Fabianelli, A.; Gloria, A.; Martorelli, M.; Lanzotti, A.; Watts, D.C.. "Mechanical behavior of bulk direct composite versus block composite and lithium disilicate indirect Class II restorations by CAD-FEM modeling". Dental Materials 33 6 (2017): 690-701. http://www.scopus.com/inward/record.url?eid=2-s2.0-85017447270&partnerID=MN8TOARS.
    10.1016/j.dental.2017.03.014
  49. Russo, T.; Gloria, A.; De Santis, R.; D'Amora, U.; Balato, G.; Vollaro, A.; Oliviero, O.; et al. "Preliminary focus on the mechanical and antibacterial activity of a PMMA-based bone cement loaded with gold nanoparticles". Bioactive Materials 2 3 (2017): 156-161. http://www.scopus.com/inward/record.url?eid=2-s2.0-85050242062&partnerID=MN8TOARS.
    10.1016/j.bioactmat.2017.05.002
  50. Calì, M.; Oliveri, S.M.; Gloria, A.; Martorelli, M.; Speranza, D.. "Comparison of Commonly Used Sail Cloths through Photogrammetric Acquisitions, Experimental Tests and Numerical Aerodynamic Simulations". Procedia Manufacturing 11 (2017): 1651-1658. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029888049&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.07.287
  51. Ferreira, J.; Gloria, A.; Cometa, S.; Coelho, J.F.J.; Domingos, M.. "Effect of in vitro enzymatic degradation on 3D printed poly(e-caprolactone) scaffolds: Morphological, chemical and mechanical properties". Journal of Applied Biomaterials and Functional Materials 15 3 (2017): e185-e195. http://www.scopus.com/inward/record.url?eid=2-s2.0-85026647232&partnerID=MN8TOARS.
    10.5301/jabfm.5000363
  52. Ausiello, P.; Ciaramella, S.; Martorelli, M.; Lanzotti, A.; Gloria, A.; Watts, D.C.. "CAD-FE modeling and analysis of class II restorations incorporating resin-composite, glass ionomer and glass ceramic materials". Dental Materials 33 12 (2017): 1456-1465. http://www.scopus.com/inward/record.url?eid=2-s2.0-85034419414&partnerID=MN8TOARS.
    10.1016/j.dental.2017.10.010
  53. Domingos, M.; Gloria, A.; Coelho, J.; Bartolo, P.; Ciurana, J.. "Three-dimensional printed bone scaffolds: The role of nano/micro-hydroxyapatite particles on the adhesion and differentiation of human mesenchymal stem cells". Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 231 6 (2017): 555-564. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021283878&partnerID=MN8TOARS.
    10.1177/0954411916680236
  54. Ronca, A.; Maiullari, F.; Milan, M.; Pace, V.; Gloria, A.; Rizzi, R.; De Santis, R.; Ambrosio, L.. "Surface functionalization of acrylic based photocrosslinkable resin for 3D printing applications". Bioactive Materials 2 3 (2017): 131-137. http://www.scopus.com/inward/record.url?eid=2-s2.0-85046104749&partnerID=MN8TOARS.
    10.1016/j.bioactmat.2017.04.002
  55. D'Amora, U.; Russo, T.; Gloria, A.; Rivieccio, V.; D'Antò, V.; Negri, G.; Ambrosio, L.; De Santis, R.. "3D additive-manufactured nanocomposite magnetic scaffolds: Effect of the application mode of a time-dependent magnetic field on hMSCs behavior". Bioactive Materials 2 3 (2017): 138-145. http://www.scopus.com/inward/record.url?eid=2-s2.0-85051561999&partnerID=MN8TOARS.
    10.1016/j.bioactmat.2017.04.003
  56. Ausiello, P.; Ciaramella, S.; Martorelli, M.; Lanzotti, A.; Zarone, F.; Watts, D.C.; Gloria, A.. "Mechanical behavior of endodontically restored canine teeth: Effects of ferrule, post material and shape". Dental Materials 33 12 (2017): 1466-1472. http://www.scopus.com/inward/record.url?eid=2-s2.0-85032994696&partnerID=MN8TOARS.
    10.1016/j.dental.2017.10.009
  57. Gonçalves, F.A.M.M.; Fonseca, A.C.; Domingos, M.; Gloria, A.; Serra, A.C.; Coelho, J.F.J.. "The potential of unsaturated polyesters in biomedicine and tissue engineering: Synthesis, structure-properties relationships and additive manufacturing". Progress in Polymer Science 68 (2017): 1-34. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009388262&partnerID=MN8TOARS.
    10.1016/j.progpolymsci.2016.12.008
  58. Ausiello, P.; Ciaramella, S.; Garcia-Godoy, F.; Martorelli, M.; Sorrentino, R.; Gloria, A.. "Stress distribution of bulk-fill resin composite in class II restorations". American Journal of Dentistry 30 4 (2017): 227-232. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029112676&partnerID=MN8TOARS.
  59. Lepore, D.; De Santis, R.; Pagliara, M.M.; Gloria, A.; Oliviero, O.; Nucci, C.; Improta, G.; Triassi, M.; Ambrosio, L.. "Effect of topical antiinflammatory drugs on mechanical behavior of rabbit cornea". Journal of Applied Biomaterials and Functional Materials 15 2 (2017): e142-e148. http://www.scopus.com/inward/record.url?eid=2-s2.0-85018326165&partnerID=MN8TOARS.
    10.5301/jabfm.5000339
  60. Bonifacio, M.A.; Cometa, S.; Dicarlo, M.; Baruzzi, F.; de Candia, S.; Gloria, A.; Giangregorio, M.M.; Mattioli-Belmonte, M.; De Giglio, E.. "Gallium-modified chitosan/poly(acrylic acid) bilayer coatings for improved titanium implant performances". Carbohydrate Polymers 166 (2017): 348-357. http://www.scopus.com/inward/record.url?eid=2-s2.0-85014958290&partnerID=MN8TOARS.
    10.1016/j.carbpol.2017.03.009
  61. Zamuner, A.; Cavo, M.; Scaglione, S.; Messina, G.M.L.; Russo, T.; Gloria, A.; Marletta, G.; Dettin, M.. "Design of decorated self-assembling peptide hydrogels as architecture for mesenchymal stem cells". Materials 9 9 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84988850965&partnerID=MN8TOARS.
    10.3390/ma9090727
  62. Russo, L.; Russo, T.; Battocchio, C.; Taraballi, F.; Gloria, A.; D'Amora, U.; De Santis, R.; et al. "Galactose grafting on poly(e-caprolactone) substrates for tissue engineering: A preliminary study". Carbohydrate Research 405 (2015): 39-46. http://www.scopus.com/inward/record.url?eid=2-s2.0-84924202268&partnerID=MN8TOARS.
    10.1016/j.carres.2014.07.027
  63. De Santis, R.; Russo, A.; Gloria, A.; D'Amora, U.; Russo, T.; Panseri, S.; Sandri, M.; et al. "Towards the design of 3D fiber-deposited poly(e-caprolactone)/iron-doped hydroxyapatite nanocomposite magnetic scaffolds for bone regeneration". Journal of Biomedical Nanotechnology 11 7 (2015): 1236-1246. http://www.scopus.com/inward/record.url?eid=2-s2.0-84918543885&partnerID=MN8TOARS.
    10.1166/jbn.2015.2065
  64. Dettin, M.; Zamuner, A.; Roso, M.; Gloria, A.; Iucci, G.; Messina, G.M.L.; D'Amora, U.; et al. "Electrospun scaffolds for osteoblast cells: Peptide-induced concentration-dependent improvements of polycaprolactone". PLoS ONE 10 9 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84945271230&partnerID=MN8TOARS.
    10.1371/journal.pone.0137505
  65. Tsaryk, R.; Gloria, A.; Russo, T.; Anspach, L.; De Santis, R.; Ghanaati, S.; Unger, R.E.; Ambrosio, L.; Kirkpatrick, C.J.. "Collagen-low molecular weight hyaluronic acid semi-interpenetrating network loaded with gelatin microspheres for cell and growth factor delivery for nucleus pulposus regeneration". Acta Biomaterialia 20 (2015): 10-21. http://www.scopus.com/inward/record.url?eid=2-s2.0-84929507929&partnerID=MN8TOARS.
    10.1016/j.actbio.2015.03.041
  66. De Santis, R.; D’Amora, U.; Russo, T.; Ronca, A.; Gloria, A.; Ambrosio, L.. "3D fibre deposition and stereolithography techniques for the design of multifunctional nanocomposite magnetic scaffolds". Journal of Materials Science: Materials in Medicine 26 10 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84942788908&partnerID=MN8TOARS.
    10.1007/s10856-015-5582-4
  67. Russo, T.; Tunesi, M.; Giordano, C.; Gloria, A.; Ambrosio, L.. "Hydrogels for central nervous system therapeutic strategies". Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 229 12 (2015): 905-916. http://www.scopus.com/inward/record.url?eid=2-s2.0-84948420622&partnerID=MN8TOARS.
    10.1177/0954411915611700
  68. Ruan, G.L.; Velasco, J.I.; Vallés, C.; Li, Z.M.; Gloria, A.; Lin, W.Z.; Liu, F.. "Review: Frontiers of materials science and engineering". Materials Research Innovations 18 (2014): S21-S24. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920663503&partnerID=MN8TOARS.
    10.1179/1432891714Z.000000000633
  69. Patrício, T.; Domingos, M.; Gloria, A.; D'Amora, U.; Coelho, J.F.; Bártolo, P.J.. "Fabrication and characterisation of PCL and PCL/PLA scaffolds for tissue engineering". Rapid Prototyping Journal 20 2 (2014): 145-156. http://www.scopus.com/inward/record.url?eid=2-s2.0-84897911326&partnerID=MN8TOARS.
    10.1108/RPJ-04-2012-0037
  70. Rongo, R.; Ametrano, G.; Gloria, A.; Spagnuolo, G.; Galeotti, A.; Paduano, S.; Valletta, R.; D'Antò, V.. "Effects of intraoral aging on surface properties of coated nickel-titanium archwires". Angle Orthodontist 84 4 (2014): 665-672. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903581492&partnerID=MN8TOARS.
    10.2319/081213-593.1
  71. Tu, M.Y.; Velasco, J.I.; Valles, C.; Gloria, A.; Lin, W.Z.; Li, Z.M.; Ruan, G.L.; Liu, F.. "Review: Progress in the studies on mechanical properties of materials". Strength of Materials 46 2 (2014): 160-163. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901277389&partnerID=MN8TOARS.
    10.1007/s11223-014-9530-1
  72. De Santis, R.; Gloria, A.; Russo, T.; D'Amora, U.; Varriale, A.; Veltri, M.; Balleri, P.; et al. "Reverse engineering of mandible and prosthetic framework: Effect of titanium implants in conjunction with titanium milled full arch bridge prostheses on the biomechanics of the mandible". Journal of Biomechanics 47 16 (2014): 3825-3829. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920564746&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2014.10.020
  73. Domingos, M.; Intranuovo, F.; Gloria, A.; Gristina, R.; Ambrosio, L.; Bártolo, P.J.; Favia, P.. "Improved osteoblast cell affinity on plasma-modified 3-D extruded PCL scaffolds". Acta Biomaterialia 9 4 (2013): 5997-6005. http://www.scopus.com/inward/record.url?eid=2-s2.0-84875372441&partnerID=MN8TOARS.
    10.1016/j.actbio.2012.12.031
  74. Russo, L.; Gloria, A.; Russo, T.; D'Amora, U.; Taraballi, F.; De Santis, R.; Ambrosio, L.; Nicotra, F.; Cipolla, L.. "Glucosamine grafting on poly(e-caprolactone): A novel glycated polyester as a substrate for tissue engineering". RSC Advances 3 18 (2013): 6286-6289. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878072624&partnerID=MN8TOARS.
    10.1039/c3ra40408k
  75. Tunesi, M.; Batelli, S.; Rodilossi, S.; Russo, T.; Grimaldi, A.; Forloni, G.; Ambrosio, L.; et al. "Development and analysis of semi-interpenetrating polymer networks for brain injection in neurodegenerative disorders". International Journal of Artificial Organs 36 11 (2013): 762-774. http://www.scopus.com/inward/record.url?eid=2-s2.0-84890254220&partnerID=MN8TOARS.
    10.5301/ijao.5000282
  76. Esposito, A.R.; Moda, M.; Cattani, S.M.D.M.; De Santana, G.M.; Barbieri, J.A.; Munhoz, M.M.; Cardoso, T.P.; et al. "PLDLA/PCL-T scaffold for meniscus tissue engineering". BioResearch Open Access 2 2 (2013): 138-147. http://www.scopus.com/inward/record.url?eid=2-s2.0-84889656039&partnerID=MN8TOARS.
    10.1089/biores.2012.0293
  77. Patrício, T.; Glória, A.; Bártolo, P.. "Mechanical and biological behaviour of PCL and PCL/PLA scaffolds for tissue engineering applications". Chemical Engineering Transactions 32 (2013): 1645-1650. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879236278&partnerID=MN8TOARS.
    10.3303/CET1332275
  78. Silva-Correia, J.; Gloria, A.; Oliveira, M.B.; Mano, J.F.; Oliveira, J.M.; Ambrosio, L.; Reis, R.L.. "Rheological and mechanical properties of acellular and cell-laden methacrylated gellan gum hydrogels". Journal of Biomedical Materials Research - Part A 101 12 (2013): 3438-3446. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886729786&partnerID=MN8TOARS.
    10.1002/jbm.a.34650
  79. De Santis, R.; Gloria, A.; Russo, T.; D'Amora, U.; D'Antò, V.; Bollino, F.; Catauro, M.; et al. "Advanced composites for hard-tissue engineering based on PCL/organic-inorganic hybrid fillers: From the design of 2D substrates to 3D rapid prototyped scaffolds". Polymer Composites 34 9 (2013): 1413-1417. http://www.scopus.com/inward/record.url?eid=2-s2.0-84882236647&partnerID=MN8TOARS.
    10.1002/pc.22446
  80. Domingos, M.; Intranuovo, F.; Russo, T.; Santis, R.D.; Gloria, A.; Ambrosio, L.; Ciurana, J.; Bartolo, P.. "The first systematic analysis of 3D rapid prototyped poly(e- caprolactone) scaffolds manufactured through BioCell printing: The effect of pore size and geometry on compressive mechanical behaviour and in vitro hMSC viability". Biofabrication 5 4 (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84889059684&partnerID=MN8TOARS.
    10.1088/1758-5082/5/4/045004
  81. Albani, D.; Gloria, A.; Giordano, C.; Rodilossi, S.; Russo, T.; D'Amora, U.; Tunesi, M.; et al. "Hydrogel-based nanocomposites and mesenchymal stem cells: A promising synergistic strategy for neurodegenerative disorders therapy". The Scientific World Journal 2013 (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84896379852&partnerID=MN8TOARS.
    10.1155/2013/270260
  82. Gloria, A.; Russo, T.; D'amora, U.; Zeppetelli, S.; D'Alessandro, T.; Sandri, M.; Bañobre-López, M.; et al. "Magnetic poly(1-caprolactone)/irondoped hydroxyapatite nanocomposite substrates for advanced bone tissue engineering". Journal of the Royal Society Interface 10 80 (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84873624894&partnerID=MN8TOARS.
    10.1098/rsif.2012.0833
  83. Puppi, D.; Mota, C.; Gazzarri, M.; Dinucci, D.; Gloria, A.; Myrzabekova, M.; Ambrosio, L.; Chiellini, F.. "Additive manufacturing of wet-spun polymeric scaffolds for bone tissue engineering". Biomedical Microdevices 14 6 (2012): 1115-1127. http://www.scopus.com/inward/record.url?eid=2-s2.0-84877072387&partnerID=MN8TOARS.
    10.1007/s10544-012-9677-0
  84. Gloria, A.; Borzacchiello, A.; Causa, F.; Ambrosio, L.. "Rheological characterization of hyaluronic acid derivatives as injectable materials toward nucleus pulposus regeneration". Journal of Biomaterials Applications 26 6 (2012): 745-759. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856304727&partnerID=MN8TOARS.
    10.1177/0885328210387174
  85. Reitmaier, S.; Shirazi-Adl, A.; Bashkuev, M.; Wilke, H.-J.; Gloria, A.; Schmidt, H.. "In vitro and in silico investigations of disc nucleus replacement". Journal of the Royal Society Interface 9 73 (2012): 1869-1879. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865088207&partnerID=MN8TOARS.
    10.1098/rsif.2012.0016
  86. Gloria, A.; Causa, F.; Russo, T.; Battista, E.; Della Moglie, R.; Zeppetelli, S.; De Santis, R.; Netti, P.A.; Ambrosio, L.. "Three-dimensional poly(e-caprolactone) bioactive scaffolds with controlled structural and surface properties". Biomacromolecules 13 11 (2012): 3510-3521. http://www.scopus.com/inward/record.url?eid=2-s2.0-84869001198&partnerID=MN8TOARS.
    10.1021/bm300818y
  87. Laino, G.; De Santis, R.; Gloria, A.; Russo, T.; Quintanilla, D.S.; Laino, A.; Martina, R.; Nicolais, L.; Ambrosio, L.. "Calorimetric and thermomechanical properties of titanium-based orthodontic wires: DSC-DMA relationship to predict the elastic modulus". Journal of Biomaterials Applications 26 7 (2012): 829-844. http://www.scopus.com/inward/record.url?eid=2-s2.0-84859021767&partnerID=MN8TOARS.
    10.1177/0885328210388678
  88. Guarino, V.; Gloria, A.; Raucci, M.G.; De Santis, R.; Ambrosio, L.. "Bio-inspired composite and cell instructive platforms for bone regeneration". International Materials Reviews 57 5 (2012): 256-275. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865695624&partnerID=MN8TOARS.
    10.1179/0950660812Z.00000000021
  89. Guarino, V.; Gloria, A.; Raucci, M.G.; Ambrosio, L.. "Hydrogel-based platforms for the regeneration of osteochondral tissue and intervertebral disc". Polymers 4 3 (2012): 1590-1612. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870507478&partnerID=MN8TOARS.
    10.3390/polym4031590
  90. Domingos, M.; Chiellini, F.; Gloria, A.; Ambrosio, L.; Bartolo, P.; Chiellini, E.. "Effect of process parameters on the morphological and mechanical properties of 3D Bioextruded poly(1-caprolactone) scaffolds". Rapid Prototyping Journal 18 1 (2012): 56-67. http://www.scopus.com/inward/record.url?eid=2-s2.0-84855833405&partnerID=MN8TOARS.
    10.1108/13552541211193502
  91. Reitmaier, S.; Wolfram, U.; Ignatius, A.; Wilke, H.-J.; Gloria, A.; Martín-Martínez, J.M.; Silva-Correia, J.; et al. "Hydrogels for nucleus replacement-Facing the biomechanical challenge". Journal of the Mechanical Behavior of Biomedical Materials 14 (2012): 67-77. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865813146&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2012.05.010
  92. de Santis, R.; Gloria, A.; Russo, T.; D'Amora, U.; Zeppetelli, S.; Tampieri, A.; Herrmannsdörfer, T.; Ambrosio, L.. "A route toward the development of 3D magnetic scaffolds with tailored mechanical and morphological properties for hard tissue regeneration: Preliminary study: A basic approach toward the design of 3D rapid prototyped magnetic scaffolds for hard-tissue regeneration is presented and validated in this paper". Virtual and Physical Prototyping 6 4 (2011): 189-195. http://www.scopus.com/inward/record.url?eid=2-s2.0-83755185896&partnerID=MN8TOARS.
    10.1080/17452759.2011.631324
  93. Bartolo, P.; Domingos, M.; Gloria, A.; Ciurana, J.. "BioCell Printing: Integrated automated assembly system for tissue engineering constructs". CIRP Annals - Manufacturing Technology 60 1 (2011): 271-274. http://www.scopus.com/inward/record.url?eid=2-s2.0-79957637487&partnerID=MN8TOARS.
    10.1016/j.cirp.2011.03.116
  94. Gloria, A.; Ronca, D.; Russo, T.; D'Amora, U.; Chierchia, M.; de Santis, R.; Nicolais, L.; Ambrosio, L.. "Technical features and criteria in designing fiber-reinforced composite materials: From the aerospace and aeronautical field to biomedical applications". Journal of Applied Biomaterials and Biomechanics 9 2 (2011): 151-163. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960999945&partnerID=MN8TOARS.
    10.5301/JABB.2011.8569
  95. Bañobre-López, M.; Piñeiro-Redondo, Y.; De Santis, R.; Gloria, A.; Ambrosio, L.; Tampieri, A.; Dediu, V.; Rivas, J.. "Poly(caprolactone) based magnetic scaffolds for bone tissue engineering". Journal of Applied Physics 109 7 (2011): http://www.scopus.com/inward/record.url?eid=2-s2.0-79955394912&partnerID=MN8TOARS.
    10.1063/1.3561149
  96. Antunes, J.C.; Pereira, C.L.; Molinos, M.; Ferreira-Da-Silva, F.; Dessi, M.; Gloria, A.; Ambrosio, L.; Gonca¸lves, R.M.; Barbosa, M.A.. "Layer-by-layer self-assembly of chitosan and poly(¿-glutamic acid) into polyelectrolyte complexes". Biomacromolecules 12 12 (2011): 4183-4195. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856258191&partnerID=MN8TOARS.
    10.1021/bm2008235
  97. De Santis, R.; Gloria, A.; Russo, T.; D'Amora, U.; Zeppetelli, S.; Dionigi, C.; Sytcheva, A.; et al. "A basic approach toward the development of nanocomposite magnetic scaffolds for advanced bone tissue engineering". Journal of Applied Polymer Science 122 6 (2011): 3599-3605. http://www.scopus.com/inward/record.url?eid=2-s2.0-81155162414&partnerID=MN8TOARS.
    10.1002/app.34771
  98. Giordano, C.; Albani, D.; Gloria, A.; Tunesi, M.; Rodilossi, S.; Russo, T.; Forloni, G.; Ambrosio, L.; Cigada, A.. "Nanocomposites for neurodegenerative diseases: Hydrogel-nanoparticle combinations for a challenging drug delivery". International Journal of Artificial Organs 34 12 (2011): 1115-1127. http://www.scopus.com/inward/record.url?eid=2-s2.0-84455195432&partnerID=MN8TOARS.
    10.5301/ijao.2011.8915
  99. Borzacchiello, A.; Gloria, A.; Mayol, L.; Dickinson, S.; Miot, S.; Martin, I.; Ambrosio, L.. "Natural/synthetic porous scaffold designs and properties for fibro-cartilaginous tissue engineering". Journal of Bioactive and Compatible Polymers 26 5 (2011): 437-451. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052739214&partnerID=MN8TOARS.
    10.1177/0883911511420149
  100. Gloria, A.; De Santis, R.; Ambrosio, L.; Causa, F.; Tanner, K.E.. "A multi-component fiber-reinforced PHEMA-based hydrogel/HAPEXTM device for customized intervertebral disc prosthesis". Journal of Biomaterials Applications 25 8 (2011): 795-810. http://www.scopus.com/inward/record.url?eid=2-s2.0-79957638054&partnerID=MN8TOARS.
    10.1177/0885328209360933
  101. Lee, J.; Guarino, V.; Gloria, A.; Ambrosio, L.; Tae, G.; Kim, Y.H.; Jung, Y.; Kim, S.-H.; Kim, S.H.. "Regeneration of Achilles' Tendon: The role of dynamic stimulation for enhanced cell proliferation and mechanical properties". Journal of Biomaterials Science, Polymer Edition 21 8-9 (2010): 1173-1190. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955121685&partnerID=MN8TOARS.
    10.1163/092050609X12471222313524
  102. Russo, T.; Gloria, A.; D'Antò, V.; D'Amora, U.; Ametrano, G.; Bollino, F.; De Santis, R.; et al. "Poly(e-caprolactone) reinforced with sol-gel synthesized organic-inorganic hybrid fillers as composite substrates for tissue engineering". Journal of Applied Biomaterials and Biomechanics 8 3 (2010): 146-152. http://www.scopus.com/inward/record.url?eid=2-s2.0-78951470550&partnerID=MN8TOARS.
    10.5301/JABB.2010.6094
  103. De Santis, R.; Gloria, A.; Prisco, D.; Amendola, E.; Puppulin, L.; Pezzotti, G.; Rengo, S.; Ambrosio, L.; Nicolais, L.. "Fast curing of restorative materials through the soft light energy release". Dental Materials 26 9 (2010): 891-900. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955509325&partnerID=MN8TOARS.
    10.1016/j.dental.2010.05.004
  104. Gloria, A.; De Santis, R.; Ambrosio, L.. "Polymer-based composite scaffolds for tissue engineering". Journal of Applied Biomaterials and Biomechanics 8 2 (2010): 57-67. http://www.scopus.com/inward/record.url?eid=2-s2.0-77957302613&partnerID=MN8TOARS.
  105. Giordano, C.; Albani, D.; Gloria, A.; Tunesi, M.; Batelli, S.; Russo, T.; Forloni, G.; Ambrosio, L.; Cigada, A.. "Multidisciplinary perspectives for Alzheimer's and Parkinson's diseases: Hydrogels for protein delivery and cell-based drug delivery as therapeutic strategies". International Journal of Artificial Organs 32 12 (2009): 836-850. http://www.scopus.com/inward/record.url?eid=2-s2.0-74349090263&partnerID=MN8TOARS.
    10.1177/039139880903201202
  106. De Santis, R.; Gloria, A.; Sano, H.; Amendola, E.; Prisco, D.; Mangani, F.; Rengo, S.; Ambrosio, L.; Nicolais, L.. "Effect of light curing and dark reaction phases on the thermomechanical properties of a Bis-GMA based dental restorative material". Journal of Applied Biomaterials and Biomechanics 7 2 (2009): 132-140. http://www.scopus.com/inward/record.url?eid=2-s2.0-70449368988&partnerID=MN8TOARS.
  107. Gloria, A.; Russo, T.; De Santis, R.; Ambrosio, L.. "3D fiber deposition technique to make multifunctional and tailor-made scaffolds for tissue engineering applications". Journal of Applied Biomaterials and Biomechanics 7 3 (2009): 141-152. http://www.scopus.com/inward/record.url?eid=2-s2.0-73149091210&partnerID=MN8TOARS.
  108. de Santis, R.; Gloria, A.; Ambrosio, L.; Nicolais, L.. "Recent patents on light curing of dental materials". Recent Patents on Biomedical Engineering 2 2 (2009): 97-109. http://www.scopus.com/inward/record.url?eid=2-s2.0-77951628754&partnerID=MN8TOARS.
    10.2174/1874764710902020097
  109. Kyriakidou, K.; Lucarini, G.; Zizzi, A.; Salvolini, E.; Mattioli Belmonte, M.; Mollica, F.; Gloria, A.; Ambrosio, L.. "Dynamic co-seeding of osteoblast and endothelial cells on 3D polycaprolactone scaffolds for enhanced bone tissue engineering". Journal of Bioactive and Compatible Polymers 23 3 (2008): 227-243. http://www.scopus.com/inward/record.url?eid=2-s2.0-42649090791&partnerID=MN8TOARS.
    10.1177/0883911508091905
  110. Gloria, A.N.; Manto, L.; De Santis, R.; Ambrosio, L.. "Biomechanical behavior of a novel composite intervertebral body fusion device". Journal of Applied Biomaterials and Biomechanics 6 3 (2008): 163-169. http://www.scopus.com/inward/record.url?eid=2-s2.0-65849195461&partnerID=MN8TOARS.
  111. Gloria, A.; Causa, F.; De Santis, R.; Netti, P.A.; Ambrosio, L.. "Dynamic-mechanical properties of a novel composite intervertebral disc prosthesis". Journal of Materials Science: Materials in Medicine 18 11 (2007): 2159-2165. http://www.scopus.com/inward/record.url?eid=2-s2.0-36448975849&partnerID=MN8TOARS.
    10.1007/s10856-007-3003-z
  112. Gloria, A.; De Santis, R.; Ronca, D.; Guida, G.; Nicolais, L.; Ambrosio, L.. "Biomechanical behavior of spongy bone: Dynamic-mechanical effects". Journal of Applied Biomaterials and Biomechanics 4 3 (2006): 195-196. http://www.scopus.com/inward/record.url?eid=2-s2.0-33947122634&partnerID=MN8TOARS.
  113. De Santis, R.; Gloria, A.; Ronca, D.; Guida, G.; Nicolais, L.; Ambrosio, L.. "Structural and mechanical properties of the cement-bone composite". Journal of Applied Biomaterials and Biomechanics 4 3 (2006): 194-194. http://www.scopus.com/inward/record.url?eid=2-s2.0-33947131665&partnerID=MN8TOARS.
Capítulo de livro
  1. Martorelli, Massimo; Gallicchio, Vito; Gloria, Antonio; Lanzotti, Antonio. "A Preliminary Analysis of the Effects of Process Parameters on the Impact Resistance of 3D Printed PETG and HIPS". In Design Tools and Methods in Industrial Engineering II, 524-534. Springer International Publishing, 2021.
    10.1007/978-3-030-91234-5_53
  2. de Crescenzo, Chiara; Richetta, Maria; Martorelli, Massimo; Gloria, Antonio; Lanzotti, Antonio. "A Further Investigation Toward the Design of Topology Optimized Solid-Lattice Hybrid Structures for Biomedical Applications". In Design Tools and Methods in Industrial Engineering II, 514-523. Springer International Publishing, 2021.
    10.1007/978-3-030-91234-5_52
  3. D'Amora, U.; Russo, T.; De Santis, R.; Gloria, A.; Ambrosioa, L.. "Hybrid nanocomposites with magnetic activation for advanced bone tissue engineering". 179-209. 2016.
  4. Guarino, V.; Gloria, A.; de Santis, R.; Ambrosio, L.. "Manufacturing multifunctional scaffolds for tissue engineering". 507-532. 2013.
  5. Gloria, A.; Russo, T.; De Santis, R.; Ambrosio, L.. "Nucleus regeneration". 563-581. 2012.
  6. Gloria, A.; De Santis, R.; Ambrosio, L.; Tanner, E.. "Artificial intervertebral discs". 295-312. 2012.
  7. Borzacchiello, A.; Gloria, A.; De Santis, R.; Ambrosio, L.. "Spinal disc implants using hydrogels". 103-117. 2011.
  8. Ambrosio, L.; Gloria, A.; Causa, F.. "Composite materials for replacement of ligaments and tendons". 234-254. 2009.
  9. Nicolais, L.; Gloria, A.; Ambrosio, L.. "The mechanics of biocomposites". 411-440. 2009.
  10. De Santis, R.; Gloria, A.; Ambrosio, L.. "Composite materials for hip joint prostheses". 276-295. 2009.
  11. Gloria, A.; De Santis, R.; Ambrosio, L.; Causa, F.. "Composite materials for spinal implants". 178-200. 2009.
Livro
  1. Gloria, A.; Domingos, M.; Maietta, S.; Martorelli, M.; Lanzotti, A.. Optimization Design Strategy for Additive Manufacturing Process to Develop 3D Magnetic Nanocomposite Scaffolds. 2020.
    10.1007/978-3-030-31154-4_81
  2. Lanzotti, A.; Martorelli, M.; Russo, T.; Gloria, A.. Design of additively manufactured lattice structures for tissue regeneration. 2018.
    10.4028/www.scientific.net/MSF.941.2154
  3. Gomez, E.; Dias, J.; D'Amora, U.; Rodríguez, C.A.; Gloria, A.; Bártolo, P.. Morphological and mechanical evaluation of hybrid scaffolds for bone regeneration. 2013.
    10.4028/www.scientific.net/AMR.749.429
  4. Dias, J.; Gloria, A.; Bártolo, P.. Mechanical and biological characteristics of electrospun PCL meshes - The influence of solvent type and concentration. 2013.
    10.4028/www.scientific.net/AMR.683.137
  5. Patrício, T.; Glória, A.; Bártolo, P.. PCL and PCL/PLA scaffolds for bone tissue regeneration. 2013.
    10.4028/www.scientific.net/AMR.683.168
  6. Raucci, M.G.; Gloria, A.; De Santis, R.; Ambrosio, L.; Tanner, E.. Introduction to biomaterials for spinal surgery. 2012.
  7. Guarino, V.; Gloria, A.; Alvarez-Perez, M.; Raucci, M.G.; Cirillo, V.; Ronca, A.; De Santis, R.; Ambrosio, L.. Design of functional polymer and composite scaffolds for the regeneration of bone, menisci, osteochondral and peripheral nervous tissues. 2011.
    10.4028/www.scientific.net/AMR.324.8
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2021/06 "Design strategies and biomimetic approach toward the development of advanced prostheses". SESSION 1 - Interactive Design Methods for Supporting Medicine. Remote Conference on "Interactive engineering for the Engineer of the Future" - Virtual Concept. 9th of July 2021
2021/05 "Design of additive manufactured scaffolds and iron-doped materials for tissue regeneration". THERMEC 2021 - International Conference on Processing & Manufacturing of advanced Materials. June 01¿05, 2021 VIENNA, AUSTRIA (Virtual Conference).
2019 "Optimization Design Strategy for Additive Manufacturing Process to Develop 3D Magnetic Nanocomposite Scaffolds". Gloria A., Domingos M., Maietta S., Martorelli M., Lanzotti A. ADM2019 International Conference ¿ International Conference on Design Tools and Methods in Industrial Engineering. Modena (IT) ¿ September 9-10, 2019.
(Itália)
2019 "Biomimetic Approach, Generative Design and Iron-Doped Materials to Develop Advanced Devices for Biomedical Applications". A. Gloria, R. De Santis, T. Russo, S. Maietta, M. Richetta, M. Martorelli. 8th Conference on Mechanics and Materials in Design. 4-6 September 2019, Bologna, Italy.
(Itália)
2019 "Design for additive manufacturing, inorganic nanoparticles and iron-doped materials to develop smart devices for Biomedical Applications". A. Gloria, T. Russo, S. Maietta, M. Martorelli, R. De Santis, A. Lanzotti. - 4th International MERGE Technologies Conference - IMTC 2019. 18 -19 September 2019, Chemnitz, Germany.
(Alemanha)
2018 A comparison between mechanical properties of specimens 3D printed with virgin and recycled PLA”. A. Lanzotti, M. Martorelli, S. Maietta, S. Gerbino, F. Penta, A. Gloria. CIRP ICME ’18 - 12th CIRP Conference on INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING - Innovative and Cognitive Production Technology and Systems 18- 20 July 2018, Gulf of Naples, Italy
(Itália)
2018 "Design and Additive Manufacturing of Scaffolds for Bone Tissue Engineering". Italian School on Magnetism Advanced magnetic materials and devices for biomedical applications, Aula Cannizzaro, Turin, 21-25 May 2018.
2017 Additive manufactured structures with improved properties for tissue engineering”. A. Lanzotti, M. Martorelli, A. Gloria. 3rd International MERGE Technologies Conference for Lightweight Structures, IMTC in Chemnitz, Germany, 21 - 22 September 2017.
2016 “Additive Manufacturing towards the design of 3D complex structures”. International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, September 14-16, 2016, Catania, Italy.
2016 3D rapid prototyped scaffolds and complex hydrogel-based devices for tissue engineering”. Gloria A. International Conference on Polymers and Moulds Innovations – PMI 2016, Ghent University, Ghent, Belgium, 21- 23 of September 2016.
2015 Advanced materials and 3D complex structures for tissue regeneration’’. 2nd CIRP Biomanufacturing Conference (CIRP-BioM 2015), July 29-31, 2015, Manchester, UK.
2014 Injectable Materials and 3D Rapid Prototyped Scaffolds: From Central Nervous System Applications to Soft and Hard Tissue Regeneration ”, for the Biomaterials and Tissue Engineering Group at the Center for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal. 10/02/14
2014 Strategies Toward the Design of Advanced Prostheses and Multifunctional Scaffolds with Tailored Properties”, PhD student group - Prof. Jorge Coelho - Department of Chemical Engineering, University of Coimbra, Portugal. 07/02/14
2013 3D Poly(e-caprolactone)-Based Scaffolds with Enhanced and Tailored Performances” - “3rd Advanced Course on Regenerative Medicine”, Center for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal. 14/03/2013
2013 Design of Advanced Prostheses and 3D Multifunctional Scaffolds with Enhanced and Tailored Properties” in the seminar series organized by the Center for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal. 18/02/2013
2009 “Polymer-based biomaterials: From tissue replacement to tissue regeneration” in the frame of the MSC in Product Development for the academic year 2009/2010 - Polytechnic Institute of Leiria, Portugal. 16/10/2009
2008 Applications of hydrogels: the intervertebral disk”, in the frame of the BIOS-COURSE Series for the Academic Year 2007/2008. BIOS - Research Doctorate School in BIOmolecular Sciences. University of Pisa, Polo Fibonacci. 16/04/2008

Júri de grau académico

Tema
Tipo de participação 		Nome do candidato (Tipo de grau)
Instituição / Organização
2021/07 External Examiner and Member of PhD examination committee (Title of Thesis: Development of biocompatible polyesters based formulations for microstereo-thermal-lithography) - PhD in "Chemical Engineering" - Department of Chemical Engineering, The University of Coimbra (Portugal), Faculty of Science and Technology. July 2021. Development of biocompatible polyesters based formulations for microstereo-thermal-lithography (Doutoramento)
Universidade de Coimbra, Portugal
2018/06 External Examiner and Member of PhD examination committee (Title of Thesis: OPTIMISATION OF COMPRESSED AIR NETWORKS WITHIN THE MANUFACTURING INDUSTRY) - PhD in "Mechanical, Aerospace and Civil Engineering" - School of Mechanical, Aerospace and Civil Engineering - Faculty of Science & Engineering, University of Manchester - UK . 6th of June 2018. OPTIMISATION OF COMPRESSED AIR NETWORKS WITHIN THE MANUFACTURING INDUSTRY (Doutoramento)
2013/10 Member of the Doctoral Committee/examination board (Title of Thesis: "Caracterizaçao Mecanica e Biologica de Scaffolds Produzidos por BioCell Printing" - "Mechanical and Biological Characterisation of Scaffolds Produced with BioCell Printing") - Universitat de Girona, Escola de Doctorat, Campus de Montilivi, Girona (Spain). The PhD dissertation was presented at the Center for Rapid and Sustainable Product Development (CDRsp) - Polytechnic Institute of Leiria, Portugal. 4 October, 2013. "Caracterizaçao Mecanica e Biologica de Scaffolds Produzidos por BioCell Printing" (Doutoramento)
Universitat de Girona - Campus de Montilivi, Espanha

Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2012 Nomination as Member of the Doctoral Committee/examination board of doctoral thesis at the Universitat de Girona - Escola de Doctorat, Campus de Montilivi, Girona (Spain) - September 2012. n.a. (Doutoramento)

Curso / Disciplina lecionado

Disciplina Curso (Tipo) Instituição / Organização
2015 - 2016 Professor of "Biomaterials" at the University of Naples Federico II (Academic Year 2015/2016)
2013 - 2015 Professor of "Fundamentals of Chemistry and Biomaterials" at the University of Naples Federico II (Academic Year 2013/2014 and 2014/2015)
2012 - 2013 Professor of "Materials Science and Technology" at the University of Naples Federico II (Academic Year 2012/2013)
2011 - 2012 Professor of "Artificial Organs and Prostheses" at the University of Naples Federico II (Academic Year 2011/2012)
2010 - 2012 Professor of "Biomaterials" at the University of Catanzaro "Magna Graecia" - Italy (Academic Year 2010/2011 and 2011/2012)

Membro de comissão

Descrição da atividade
Tipo de participação 		Instituição / Organização
2019 - 2019 Chair of the Special Session on “Measurement Science and Design for Additive Manufacturing”. 2019 IEEE International Workshop on Metrology for Industry 4.0 and IoT - MetroInd4.0&IoT. June 4-6, 2019. Naples, Italy. http://www.metroind40iot.org/metroind2019/final-program.
Membro
2018 - 2018 Technical Program Committee Chair of the “2018 5th Global Conference on Polymer and Composite Materials (PCM 2018)”- April 10-13 2018, Kitakyushu City, Japan. http://www.cpcmconf.org/.
Membro
2018 - 2018 Minisymposia organizer and Chair of the “Biomechanics” Session at the First International Conference on Mechanics of Advanced Materials and Structures (ICMAMS), 17-20 June, 2018, Torino, Italy.
Membro
2018 - 2018 Minisymposia organizer and Chair of the “Nanotechnology” Session at the First International Conference on Mechanics of Advanced Materials and Structures (ICMAMS), 17-20 June, 2018, Torino, Italy.
Membro
2018 - 2018 Chair of the “Additive Manufacturing II & Assembly I” Session at the CIRP ICME ’18 - 12th CIRP Conference on INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING - Innovative and Cognitive Production Technology and Systems 18- 20 July 2018, Gulf of Naples, Italy.
Membro
2017/05/23 - 2017/05/25 Technical Program Committee Chair of the “2017 Global Conference on Polymer and Composite Materials (PCM 2017)” - May 23-25 2017, Guangzhou, Guangdong, China. http://www.cpcmconf.org/.
Membro
2017 - 2017 Member of the International scientific committee of the “6th Global Conference on Materials Science and Engineering (CMSE2017)”, October 24-27, 2017, Beijing, China. http://www.cmseconf.org/
Membro
2016/11/08 - 2016/11/11 Member of the International scientific committee of the “5th Global Conference on Materials Science and Engineering (CMSE2016)”, November 8-11, 2016, Tunghai University, Taiwan. http://www.cmseconf.org/.
Membro
2016/09/21 - 2016/09/23 Member of the Scientific Committee and Head of Symposium “Polymer & composite materials” - International Conference on Polymers and Moulds Innovations (PMI 2016), Ghent University, Ghent, Belgium, 21-23 of September 2016. http://www.dep.uminho.pt/PMI2016/scientific.html.
Membro
2016/08/01 - 2016/08/04 Member of the International scientific committee of the “5th International Conference on Biomedical Engineering and Biotechnology (ICBEB 2016)”, August 1st - 4th, 2016, Hangzhou, China. http://2016.icbeb.org/.
Membro
2016/05/20 - 2016/05/23 Technical Program Committee Chair of the “2016 Global Conference on Polymer and Composite Materials (PCM 2016)”- May 20th - 23rd, 2016, Hangzhou, China. http://www.cpcmconf.org/.
Membro
2016 - 2016 Chair of a session on “Polymer & Composite materials” at the International Conference on Polymers and Moulds Innovations – PMI 2016, Ghent University, Ghent, Belgium, 21- 23 of September 2016. http://www.dep.uminho.pt/PMI2016/scientific.html.
Membro
2015/08/18 - 2015/08/21 Member of the International scientific committee of the “4th International Conference on Biomedical Engineering and Biotechnology (iCBEB 2015), Shangai, China, August 18-21, 2015. http://2015.icbeb.org/.
Membro
2015/08/03 - 2015/08/06 Technical Program Committee Chair of the “4th Global Conference on Materials Science and Engineering (CMSE 2015)” - August 3-6, 2015, Macau. http://www.cmseconf.org/.
Membro
2015/07/29 - 2015/07/31 Member of the Scientific Committee of the 2nd CIRP Biomanufacturing Conference (CIRP-BioM 2015), July 29-31, 2015, Manchester, UK. http://www.mace.manchester.ac.uk/our-research/seminars/cirp/.
Membro
2015/07/29 - 2015/07/31 Member of the Panel of the Special Session on “Grand Challenges in Biomanufacturing” -2nd CIRP Biomanufacturing Conference (CIRP-BioM 2015), July 29-31, 2015, Manchester, UK.
Membro
2015/06/25 - 2015/06/27 Member of the Scientific Committee of the “International Conference on Tissue Engineering (ICTE 2015)”, Lisbon, Portugal, 25th-27th of June 2015. http://www.dem.ist.utl.pt/icte2015/.
Membro
2015/05/16 - 2015/05/19 Technical Program Committee Chair of the “2015 Global Conference on Polymer and Composite Materials (PCM 2015)” - May 16-19, 2015, Beijing, China. http://www.cpcmconf.org/.
Membro
2015 - 2015 Chair of the “3rd Advanced Course on Regenerative Medicine” (http://cdrsp.ipleiria.pt/cdrsp-news/3rd-advanced-course-on-regenerative-medicine), Center for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, Portugal.
Outro
2014/10/20 - 2014/10/23 Technical Program Committee Chair of the “3rd Global Conference on Materials Science and Engineering (CMSE 2014)” - Shanghai, China, October 20-23, 2014. http://www.cmseconf.org/.
Membro
2014/09/25 - 2014/09/28 Member of the International Scientific Committee of the “3rd International Conference on Biomedical Engineering and Biotechnology (iCBEB 2014)”, Beijing, China, 25-28 September, 2014. http://2014.icbeb.org/.
Membro
2014/05/27 - 2014/05/29 Technical Program Committee Chair of the “2014 Global Conference on Polymer and Composite Materials (PCM 2014)” - Ningbo, China, May 27-29,2014. http://www.cpcmconf.org/.
Membro
2013/10/11 - 2013/10/13 Member of the International scientific committee of the “2nd International Conference on Biomedical Engineering and Biotechnology (iCBEB 2013), Wuhan, China, 11-13 October, 2013. http://2013.icbeb.org/.
Membro
2013/10/01 - 2013/10/05 Member of the International Scientific Committee of the “International Conference on Advanced Research in Virtual and Rapid Prototyping - VRAP 2013, Leiria, Portugal,1-5 October 2013. http://vrap.ipleiria.pt/.
Membro
2013/06/06 - 2013/06/08 Member of the International Scientific Committee of the “International Conference on Tissue Engineering”, Leiria, Portugal, 6-8 June 2013. http://www.icte.ipleiria.pt/.
Membro
2013 - 2013 Member of the International Scientific Committee and Reviewer of the “11th International Conference on Chemical & Process Engineering” (ICheaP-11), 2-5 June 2013 - Milan, Italy. http://www.aidic.it/icheap11/.
Membro
 The Italian Association of Chemical Engineering, Itália
2013 - 2013 Member of the International Scientific Committee of the “2nd Global Conference on Materials Science and Engineering (CMSE 2013)”, University of Science and Technology, Xianning, Hubei Province of China, 20-22 November, 2013. http://www.cmseconf.org/.
Membro
2013 - 2013 Chair at the “International Conference on Tissue Engineering” (ICTE 2013), Leiria, Portugal), 6-8/06/2013.
Membro
2013 - 2013 Chair of the “Applications Session” at the “6th International Conference on Advanced Research in Virtual and Rapid Prototyping - VRAP 2013”, Leiria, Portugal, 1-5/10/2013.
Membro
2011 - 2011 Member of the International scientific Chair of the “Biomanufacturing” Session at the VRAP “5th International Conference on Advanced Research in Virtual and Rapid Prototyping ”, Leiria – Portugal, 28/09/11 - 01/10/11.
Membro
Distinções

Prémio

2021 Poster Award Winner - AN INTEGRATED EXPERIMENTAL-THEORETICAL APPROACH OF SINGLE CELL MECHANICS AFTER IN-FLOW COMPRESSIVE FORCES. 26th Congress of the European Society of Biomechanics.(ESB) July 2021. Contribution as Co-Author
European Society of Biomechanics, Bélgica

Outra distinção

2020 Nomination/Appointment as Member of The Royal Society (UK) - International Exchanges Committee, January 2020.
The Royal Society, Reino Unido
2016 Nomination/Appointment as Member of the Scientific Advisory Board of the Fraunhofer International Joint Laboratory "Interactive Design And Simulation" (IDEAS) - University of Naples Federico II, June 2016
Università degli Studi di Napoli Federico II Dipartimento di Ingegneria Industriale, Itália
2015 Nomination/Appointment as "Future Leader" in Science and Technology in Society - "Dialogue between Nobel Laureates and Future Leaders"- Science and Technology in Society - STS forum , October 2015, Kyoto, Japan
2011 Appointment as Visiting Professor and Associate Member at Centre for Rapid and Sustainable Product Development (CDRsp)- Polytechnic Institute of Leiria, Portugal. May 2011
2011 Full Member of the American Nano Society (June 2011 to 2017)
2009 BEST PAPER AWARD "BioExtruder: study of the influence of process parameters on PCL scaffolds properties" (M. Domingos, F. Chiellini, A. Gloria, L. Ambrosio, P. Bartolo & E. Chiellini)
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal