???global.info.a_carregar???
Luis Filipe Martins de Menezes. Concluiu o(a) Título de Agregado em Engenharia Mecânica em 2003 pelo(a) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Doutoramento em Engenharia Mecânica em 1995 pelo(a) Universidade de Coimbra Faculdade de Ciencias e Tecnologia e Licenciatura em Engenharia Mecânica em 1987 pelo(a) Universidade de Coimbra Faculdade de Ciencias e Tecnologia. É Professor Catedrático no(a) Universidade de Coimbra e Professor Catedrático no(a) Universidade de Coimbra Faculdade de Ciencias e Tecnologia. Publicou 114 artigos em revistas especializadas. Possui 9 livro(s).
Identificação

Identificação pessoal

Nome completo
Luis Filipe Martins de Menezes

Nomes de citação

  • Menezes, Luis

Identificadores de autor

Ciência ID
A815-1728-E826
ORCID iD
0000-0002-4703-9346

Endereços de correio eletrónico

  • luis.menezes@uc.pt (Profissional)
  • luis.menezes@uc.pt (Profissional)

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Francês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Inglês Utilizador independente (B1) Utilizador proficiente (C1) Utilizador independente (B1) Utilizador independente (B1)
Espanhol; Castelhano Utilizador elementar (A1) Utilizador proficiente (C1) Utilizador elementar (A1) Utilizador elementar (A1)
Português Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Formação
Grau Classificação
2003
Concluído
Engenharia Mecânica (Título de Agregado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Unanimidade
1995
Concluído
Engenharia Mecânica (Doutoramento)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"Modelação Tridimensional e Simulação Numérica dos Processos de Enformação por Deformação Plástica - Aplicação à Estampagem de Chapas Metálicas" (TESE/DISSERTAÇÃO)
Distinção e Louvor
1987
Concluído
Engenharia Mecânica (Licenciatura)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"---" (TESE/DISSERTAÇÃO)
17
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento
Empregador
2012 - Atual Professor Catedrático (Docente Universitário) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2004 - 2012 Professor Associado (Docente Universitário) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1995 - 2004 Professor Auxiliar (Docente Universitário) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1989 - 1995 Assistente (Docente Universitário) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1987 - 1989 Assistente Estagiário (Docente Universitário) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1986 - 1987 Monitor (Docente Universitário) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Universidade de Coimbra Departamento de Engenharia Mecânica, Portugal

Outros

Categoria Profissional
Instituição de acolhimento
Empregador
2013/09/01 - 2019 Vice-Reitor Universidade de Coimbra, Portugal
2009 - 2013 SubDirector Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2009/07/01 - 2012/07/01 Membro do Conselho Científico das Ciências Exactas e das Engenharias Fundação para a Ciência e a Tecnologia, Portugal
2005/04/01 - 2010/10/01 Coordenador da Unidade de I&D Centro de Engenharia Mecânica da Universidade de Coimbra (CEMUC) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2005 - 2010 Vice-Presidente do Conselho Científico da Faculdade de Ciências e Tecnologia da Univ de Coimbra Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Projetos

Bolsa

Designação Financiadores
2016/01 - 2018/12 Watch4ming: Monitoring the stamping of advanced high strength steels Stichting Weten
2013/07 - 2015/11 Experimental and Numerical Simulation Analysis in the Optimisation of Warm Forming of lightweight advanced sheet materials Stichting Weten
2012/05 - 2015/10 Numerical Simulation and Automatic Design of multi-step sheet metal forming processes Stichting Weten
2011/04 - 2014/09 Characterization of the Constitutive Behavior of Metal Sheets from a Single Multi-Path-Experimental-Test by Inverse Analysis Stichting Weten
2011/04 - 2014/03 Numerical modelling of fatigue crack propagation Stichting Weten
2010/04 - 2013/07 N2C: Nagata patch descritization toward continuous treatment of contact with friction Stichting Weten
2007/08 - 2011/08 Mechanical, wear and fatigue properties of sintered Nanotube-based functionally graded materials Stichting Weten
2007/08 - 2010/12 STUDY OF FRICTION IN SHEET METAL FORMING: BRIDGING THE GAP BETWEEN THE EXPERIMENTAL AND THE NUMERICAL ANALYSIS Stichting Weten
2007/08 - 2010/12 Numerical analysis and modelling of heat treatments on metallic geometrically complex parts Stichting Weten
2005/06 - 2008/06 FORTAB - Formability of aluminium friction stir welded tailored blanks Stichting Weten
2005/04 - 2008/06 Evaluation of Mechanical Properties of Thin Films by Nanoindentation: Numerical Simulation and Experimental Validation Stichting Weten
Produções

Publicações

Artigo em conferência
  1. Oliveira, M.C.; Neto, D.M.; Barros, P.D.; Alves, J.L.; Menezes, L.F.. "Forming defects prediction in cup drawing and embossing of a thick steel sheet". 2021.
    10.25518/esaform21.1525
  2. Marques, B.M.; Andrade, C.M.; Neto, D.M.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Numerical analysis of residual stresses in parts produced by selective laser melting process". 2020.
    10.1016/j.promfg.2020.04.167
  3. Oliveira, M.C.; Neto, D.M.; Alves, J.L.; Menezes, L.F.. "Study on the influence of the yield surface shape in the hole expansion test". 2020.
    10.1088/1757-899X/967/1/012085
  4. Neto, D.M.; Barros, J.R.; Oliveira, M.C.; Antunes, P.V.; Ramalho, A.; Amaral, R.L.; Santos, A.D.; Alves, J.L.; Menezes, L.F.. "Heat generation when forming AHSS: Experimental and numerical analysis of tensile and draw-bead tests". 2020.
    10.1088/1757-899X/967/1/012086
  5. Oliveira, M.C.; Germain, L.; Laurent, H.; Simões, V.M.; Neto, D.M.; Alves, J.L.; Menezes, L.F.. "A modified Hockett-Sherby law enabling the description of the thermomechanical behaviour of the AA6061-T6". 2020.
    10.1016/j.promfg.2020.04.277
  6. Tse, R.; Im, M.; Tang, S.-K.; Menezes, L.F.; Dias, A.M.P.G.; Pau, G.. "Self-adaptive sensing iot platform for conserving historic buildings and collections in museums". 2020.
  7. Andrade, C.M.; Barros, J.R.; Neto, D.M.; Ramalho, A.; Oliveira, M.C.; Menezes, L.F.; Alves, J.L.. "The role of viscoelasticity in the mechanical modelling of rubbers". 2019.
    10.1063/1.5112751
  8. Brito, J.P.; Oliveira, M.C.; Neto, D.M.; Alves, J.L.; Menezes, L.F.. "Influence of the characteristics of the 3D FE mesh on the evolution of variables used to characterize the stress state". 2019.
    10.1063/1.5112712
  9. Laurent, H.; Simoes, V.M.; Oliveira, M.C.; Menezes, L.F.. "The influence of warm forming conditions on the natural aging and springback of a 6016-T4 aluminum alloy". 2018.
    10.1088/1757-899X/418/1/012020
  10. Barros, P.D.; Neto, D.M.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "Study on the influence of orthotropy and tension-compression asymmetry of metal sheets in springback and formability predictions". 2018.
    10.1088/1742-6596/1063/1/012053
  11. Simoes, V.M.; Neto, D.M.; Oliveira, M.C.; Alves, J.L.; Laurent, H.; Menezes, L.F.. "Temperature analysis during the drawing of an aluminum cylindrical cup". 2018.
    10.1088/1742-6596/1063/1/012137
  12. Neto, D.M.; Barros, P.D.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Study of the frictional contact conditions in the hole expansion test". 2018.
    10.1088/1742-6596/1063/1/012139
  13. Simões, V.M.; Laurent, H.; Oliveira, M.C.; Menezes, L.F.. "Natural aging effect on the forming behavior of a cylindrical cup with an Al-Mg-Si alloy". 2016.
    10.1063/1.4963639
  14. Neto, D.M.; Oliveira, M.C.; Alves, J.L.; Santos, A.D.; Menezes, L.F.. "Prediction of wrinkling and springback in sheet metal forming". 2016.
    10.1051/matecconf/20168003005
  15. Martins, J.M.P.; Neto, D.M.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "Automatic correction of the time step in implicit simulations of thermomechanical problems". 2016.
    10.1051/matecconf/20168007002
  16. Ferreira, E.; Maia, A.; Oliveira, M.C.; Menezes, L.F.; Andrade-Campos, A.. "Optimization strategies and statistical analysis for springback compensation in sheet metal forming". 2015.
  17. Maia, A.; Ferreira, E.; Oliveira, M.C.; Menezes, L.F.; Andrade-Campos, A.. "Robust optimization strategies for sheet metal springback compensation". 2015.
  18. Prates, P.A.; Fernandes, J.V.; Oliveira, M.C.; Sakharova, N.A.; Menezes, L.F.. "On the characterization of the plastic anisotropy in orthotropic sheet metals with a cruciform biaxial test". 2014.
    10.1088/1757-899X/10/1/012142
  19. Neto, D.M.; Barros, P.D.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Finite element analysis of wrinkling during cup drawing". 2014.
  20. Oliveira, M.C.; Alves, J.L.; Menezes, L.F.; Ramalho, A.. "Finite element analysis of the amontons-coulomb's model using local and global friction tests". 2011.
    10.1063/1.3589779
  21. Menezes, L.F.; Neto, D.M.; Oliveira, M.C.; Alves, J.L.. "Improving computational performance through HPC techniques: Case study using DD3IMP in-house code". 2011.
    10.1063/1.3589683
  22. Alves, J.L.; Bouvier, S.; Jomâa, M.; Billardon, R.; Oliveira, M.C.; Menezes, L.F.. "Kinematic hardening: Characterization, modeling and impact on springback prediction". 2007.
    10.1063/1.2740891
  23. Padmanabhan, R.; Oliveira, M.C.; Baptista, A.J.; Alves, J.L.; Menezes, L.F.. "Study on the influence of the refinement of a 3-D finite element mesh in springback evaluation of plane-strain channel sections". 2007.
    10.1063/1.2740916
  24. Oliveira, M.C.; Baptista, A.J.; Alves, J.L.; Menezes, L.F.; Green, D.E.; Ghaei, A.. "Influence of drawbeads in deep-drawing of plane-strain channel sections: Experimental and FE analysis". 2007.
    10.1063/1.2740915
  25. Baptista, A.J.; Alves, J.L.; Oliveira, M.C.; Rodrigues, D.M.; Menezes, L.F.. "Incremental volumetric remapping method: Analysis and error evaluation". 2007.
    10.1063/1.2740914
  26. Padmanabhan, R.; Oliveira, M.C.; Baptista, A.J.; Alves, J.L.; Menezes, L.F.. "Influence of anisotropy properties in finite element optimization of blank shape using NURBS surfaces". 2007.
  27. Alves, J.L.; Bouvier, S.; Oliveira, M.C.; Menezes, L.F.. "Drawbeads: To be or not to be". 2005.
    10.1063/1.2011297
  28. Baptista, A.J.; Alves, J.L.; Oliveira, M.C.; Rodrigues, D.M.; Menezes, L.F.. "Application of the incremental volumetric remapping method in the simulation of multi-step deep drawing processes". 2005.
    10.1063/1.2011213
  29. Oliveira, M.C.; Alves, J.L.; Chaparro, B.M.; Menezes, L.F.. "Study on the influence of the work hardening models constitutive parameters identification in the springback prediction". 2005.
    10.1063/1.2011228
Artigo em revista
  1. Oliveira, M.C.; Cazacu, O.; Chandola, N.; Alves, J.L.; Menezes, L.F.. "On the effect of the ratio between the yield stresses in shear and in uniaxial tension on forming of isotropic materials". Mechanics Research Communications 114 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85104992063&partnerID=MN8TOARS.
    10.1016/j.mechrescom.2021.103693
  2. Khalfallah, A.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Constitutive parameter identification of CB2001 yield function and its experimental verification using tube hydroforming tests". International Journal of Mechanical Sciences 185 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85086311755&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2020.105868
  3. Neto, D.M.; Simões, V.M.; Oliveira, M.C.; Alves, J.L.; Laurent, H.; Oudriss, A.; Menezes, L.F.. "Experimental and numerical analysis of the heat generated by plastic deformation in quasi-static uniaxial tensile tests". Mechanics of Materials 146 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85083813150&partnerID=MN8TOARS.
    10.1016/j.mechmat.2020.103398
  4. P.D. Barros; M.C. Oliveira; J.L. Alves; L.F. Menezes. "On the impact of modelling tension-compression asymmetry on earing and thickness predictions". Advances in Materials and Processing Technologies (2019): 1-16. https://doi.org/10.1080/2374068X.2019.1622299.
    10.1080/2374068X.2019.1622299
  5. D.M. Neto; M. Pais; M.C. Oliveira; J.L. Alves; L.F. Menezes. "Thermomechanical analysis of the draw bead test". Advances in Materials and Processing Technologies 5 3 (2019): 401-417. https://doi.org/10.1080/2374068X.2019.1616478.
    10.1080/2374068X.2019.1616478
  6. Neto, D.M.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Numerical study on the formability of metallic bipolar plates for proton exchange membrane (PEM) fuel cells". Metals 9 7 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85073285897&partnerID=MN8TOARS.
    10.3390/met9070810
  7. Simões, V.M.; Oliveira, M.C.; Laurent, H.; Menezes, L.F.. "The punch speed influence on warm forming and springback of two Al-Mg-Si alloys". Journal of Manufacturing Processes 38 (2019): 266-278. http://www.scopus.com/inward/record.url?eid=2-s2.0-85060086553&partnerID=MN8TOARS.
    10.1016/j.jmapro.2019.01.020
  8. Simões, V.; Laurent, H.; Oliveira, M.; Menezes, L.. "The influence of warm forming in natural aging and springback of Al-Mg-Si alloys". International Journal of Material Forming 12 1 (2019): 57-68. http://www.scopus.com/inward/record.url?eid=2-s2.0-85042080898&partnerID=MN8TOARS.
    10.1007/s12289-018-1406-7
  9. Menezes, Luis. "Numerical study of springback using the split-ring test: influence of the clearance between the die and the punch". International Journal of Material Forming (2018):
    10.1007/s12289-017-1351-x
  10. Menezes, Luis. "Detailed experimental and numerical analysis of a cylindrical cup deep drawing: Pros and cons of using solid-shell elements". International Journal of Material Forming (2018):
    10.1007/s12289-017-1357-4
  11. Menezes, Luis. "Incremental volumetric and Dual Kriging remapping methods". Finite Elements in Analysis and Design (2018):
    10.1016/j.finel.2017.10.005
  12. Menezes, Luis. "Thermo-mechanical finite element analysis of the AA5086 alloy under warm forming conditions". International Journal of Solids and Structures (2018):
    10.1016/j.ijsolstr.2017.06.011
  13. Menezes, Luis. "Study on the effect of tension-compression asymmetry on the cylindrical cup forming of an AA2090-T3 alloy". International Journal of Solids and Structures (2018):
    10.1016/j.ijsolstr.2017.06.034
  14. Menezes, Luis. "A new staggered algorithm for thermomechanical coupled problems". International Journal of Solids and Structures (2017):
    10.1016/j.ijsolstr.2017.06.002
  15. Menezes, Luis. "Influence of boundary conditions on the prediction of springback and wrinkling in sheet metal forming". International Journal of Mechanical Sciences (2017):
    10.1016/j.ijmecsci.2017.01.037
  16. Alves, J.L.; Oliveira, M.C.; Menezes, L.F.; Cazacu, O.. "The role of tension-compression asymmetry of the plastic flow on ductility and damage accumulation of porous polycrystals". Ciencia e Tecnologia dos Materiais 29 1 (2017): e234-e238. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021992996&partnerID=MN8TOARS.
    10.1016/j.ctmat.2016.06.006
  17. Neto, D.M.; Martins, J.M.P.; Oliveira, M.C.; Menezes, L.F.; Alves, J.L.. "Evaluation of strain and stress states in the single point incremental forming process". International Journal of Advanced Manufacturing Technology 85 1-4 (2016): 521-534. http://www.scopus.com/inward/record.url?eid=2-s2.0-84945232366&partnerID=MN8TOARS.
    10.1007/s00170-015-7954-9
  18. Neto, D.M.; Oliveira, M.C.; Menezes, L.F.; Alves, J.L.. "A contact smoothing method for arbitrary surface meshes using Nagata patches". Computer Methods in Applied Mechanics and Engineering 299 (2016): 283-315. http://www.scopus.com/inward/record.url?eid=2-s2.0-84948823207&partnerID=MN8TOARS.
    10.1016/j.cma.2015.11.011
  19. Barros, P.D.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "Modeling of tension-compression asymmetry and orthotropy on metallic materials: Numerical implementation and validation". International Journal of Mechanical Sciences 114 (2016): 217-232. http://www.scopus.com/inward/record.url?eid=2-s2.0-84973557250&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2016.05.020
  20. Martins, J.M.P.; Alves, J.L.; Neto, D.M.; Oliveira, M.C.; Menezes, L.F.. "Numerical analysis of different heating systems for warm sheet metal forming". International Journal of Advanced Manufacturing Technology 83 5-8 (2016): 897-909. http://www.scopus.com/inward/record.url?eid=2-s2.0-84959109201&partnerID=MN8TOARS.
    10.1007/s00170-015-7618-9
  21. Martins, J.M.P.; Neto, D.M.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "Numerical modeling of the thermal contact in metal forming processes". International Journal of Advanced Manufacturing Technology 87 5-8 (2016): 1797-1811. http://www.scopus.com/inward/record.url?eid=2-s2.0-84960363934&partnerID=MN8TOARS.
    10.1007/s00170-016-8571-y
  22. Neto, D.M.; Coër, J.; Oliveira, M.C.; Alves, J.L.; Manach, P.Y.; Menezes, L.F.. "Numerical analysis on the elastic deformation of the tools in sheet metal forming processes". International Journal of Solids and Structures 100-101 (2016): 270-285. http://www.scopus.com/inward/record.url?eid=2-s2.0-84994520017&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2016.08.023
  23. Bernard, C.; Coër, J.; Laurent, H.; Manach, P.Y.; Oliveira, M.; Menezes, L.F.. "Influence of Portevin-Le Chatelier Effect on Shear Strain Path Reversal in an Al-Mg Alloy at Room and High Temperatures". Experimental Mechanics (2016): 1-11. http://www.scopus.com/inward/record.url?eid=2-s2.0-84994718397&partnerID=MN8TOARS.
    10.1007/s11340-016-0229-z
  24. Barros, P.D.; Carvalho, P.D.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "DD3MAT - A code for yield criteria anisotropy parameters identification.". Journal of Physics: Conference Series 734 3 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84989234577&partnerID=MN8TOARS.
    10.1088/1742-6596/734/3/032053
  25. Martins, J.M.P.; Cunha, P.M.; Neto, D.M.; Alves, J.L.; Oliveira, M.C.; Laurent, H.; Menezes, L.F.. "A staggered coupling strategy for the finite element analysis of warm deep drawing process". Journal of Physics: Conference Series 734 3 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84989253898&partnerID=MN8TOARS.
    10.1088/1742-6596/734/3/032033
  26. Neto, D.M.; Diogo, C.M.A.; Neves, T.F.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Remapping algorithms: Application to trimming operations in sheet metal forming". Journal of Physics: Conference Series 734 3 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84989244677&partnerID=MN8TOARS.
    10.1088/1742-6596/734/3/032046
  27. Pedro Barros; José Luís Alves; Marta Oliveira; Luís Filipe Menezes; K. Saanouni. "Tension-compression asymmetry modelling: strategies for anisotropy parameters identification.". MATEC Web of Conferences 80 (2016): 05002-05002. https://doi.org/10.1051%2Fmatecconf%2F20168005002.
    10.1051/matecconf/20168005002
  28. Laurent, H.; Coër, J.; Manach, P.Y.; Oliveira, M.C.; Menezes, L.F.. "Experimental and numerical studies on the warm deep drawing of an Al-Mg alloy". International Journal of Mechanical Sciences 93 (2015): 59-72. http://www.scopus.com/inward/record.url?eid=2-s2.0-84921954415&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2015.01.009
  29. Neto, D.M.; Oliveira, M.C.; Dick, R.E.; Barros, P.D.; Alves, J.L.; Menezes, L.F.. "Numerical and experimental analysis of wrinkling during the cup drawing of an AA5042 aluminium alloy". International Journal of Material Forming (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84940704019&partnerID=MN8TOARS.
    10.1007/s12289-015-1265-4
  30. Neto, D.M.; Oliveira, M.C.; Menezes, L.F.. "Surface Smoothing Procedures in Computational Contact Mechanics". Archives of Computational Methods in Engineering (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84946771762&partnerID=MN8TOARS.
    10.1007/s11831-015-9159-7
  31. Khalfallah, A.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "Influence of the characteristics of the experimental data set used to identify anisotropy parameters". Simulation Modelling Practice and Theory 53 (2015): 15-44. http://www.scopus.com/inward/record.url?eid=2-s2.0-84924571569&partnerID=MN8TOARS.
    10.1016/j.simpat.2015.02.007
  32. Khalfallah, A.; Oliveira, M.C.; Alves, J.L.; Zribi, T.; Belhadjsalah, H.; Menezes, L.F.. "Mechanical characterization and constitutive parameter identification of anisotropic tubular materials for hydroforming applications". International Journal of Mechanical Sciences 104 (2015): 91-103. http://www.scopus.com/inward/record.url?eid=2-s2.0-84946228769&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2015.09.017
  33. Barros, P.D.; Baptista, A.J.; Alves, J.L.; Oliveira, M.C.; Rodrigues, D.M.; Menezes, L.F.. "Trimming of 3D solid finite element meshes: sheet metal forming tests and applications". Engineering with Computers 31 2 (2015): 237-257. http://www.scopus.com/inward/record.url?eid=2-s2.0-84925291213&partnerID=MN8TOARS.
    10.1007/s00366-013-0344-8
  34. Maia, A.; Oliveira, M.C.; Andrade-Campos, A.; Menezes, L.F.. "Sensitivity analysis for numerical sheet metal forming processes". 651-653 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84944189570&partnerID=MN8TOARS.
    10.4028/www.scientific.net/KEM.651-653.1369
  35. Neto, D.M.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Influence of the plastic anisotropy modelling in the reverse deep drawing process simulation". Materials and Design 60 (2014): 368-379. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899680139&partnerID=MN8TOARS.
    10.1016/j.matdes.2014.04.008
  36. Neto, D.M.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Comparing faceted and smoothed tool surface descriptions in sheet metal forming simulation". International Journal of Material Forming 8 4 (2014): 549-565. http://www.scopus.com/inward/record.url?eid=2-s2.0-84941169232&partnerID=MN8TOARS.
    10.1007/s12289-014-1177-8
  37. Neto, D.M.; Oliveira, M.C.; Menezes, L.F.; Alves, J.L.. "Applying Nagata patches to smooth discretized surfaces used in 3D frictional contact problems". Computer Methods in Applied Mechanics and Engineering 271 (2014): 296-320. http://www.scopus.com/inward/record.url?eid=2-s2.0-84893174743&partnerID=MN8TOARS.
    10.1016/j.cma.2013.12.008
  38. Barros, P.D.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Pre-strain effect on springback of 2D draw bending". International Journal of Materials Engineering Innovation 4 2 (2013): 187-211. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879031730&partnerID=MN8TOARS.
    10.1504/IJMATEI.2013.054395
  39. Neto, D.M.; Oliveira, M.C.; Menezes, L.F.; Alves, J.L.. "Nagata patch interpolation using surface normal vectors evaluated from the IGES file". Finite Elements in Analysis and Design 72 (2013): 35-46. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879037605&partnerID=MN8TOARS.
    10.1016/j.finel.2013.03.004
  40. Coër, J.; Manach, P.Y.; Laurent, H.; Oliveira, M.C.; Menezes, L.F.. "Piobert-Lüders plateau and Portevin-Le Chatelier effect in an Al-Mg alloy in simple shear". Mechanics Research Communications 48 (2013): 1-7. http://www.scopus.com/inward/record.url?eid=2-s2.0-84871793041&partnerID=MN8TOARS.
    10.1016/j.mechrescom.2012.11.008
  41. Neto, D.M.; Oliveira, M.C.; Menezes, L.F.; Alves, J.L.. "Improving Nagata patch interpolation applied for tool surface description in sheet metal forming simulation". CAD Computer Aided Design 45 3 (2013): 639-656. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870806464&partnerID=MN8TOARS.
    10.1016/j.cad.2012.10.046
  42. Oliveira, M.C.; Alves, J.L.; Menezes, L.F.; Ito, K.; Mori, N.. "Local bifurcation and instability theory applied to formability analysis". International Journal of Material Forming 4 3 (2011): 347-356. http://www.scopus.com/inward/record.url?eid=2-s2.0-80051947013&partnerID=MN8TOARS.
    10.1007/s12289-010-1019-2
  43. Figueiredo, L; Ramalho, A; Oliveira, MC; Menezes, LF. "Experimental study of friction in sheet metal forming". Wear 271 9-10 (2011): 1651-1657.
    10.1016/j.wear.2011.02.020
  44. Grze, R.; Manach, P.Y.; Laurent, H.; Thuillier, S.; Menezes, L.F.. "Influence of the temperature on residual stresses and springback effect in an aluminium alloy". International Journal of Mechanical Sciences 52 9 (2010): 1094-1100. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955303324&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2010.04.008
  45. Kolevska, A.; Padmanabhan, R.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Finite element analysis of the influence of the restraining force in the draw bend test". International Journal of Material Forming 3 SUPPL. 1 (2010): 143-146. http://www.scopus.com/inward/record.url?eid=2-s2.0-78651567934&partnerID=MN8TOARS.
    10.1007/s12289-010-0727-y
  46. Pereira, F.I.; Oliveira, M.C.; Ramalho, A.; Alves, J.L.; Menezes, L.F.; Padmanabhan, R.. "Finite element analysis on the influence of material mechanical properties in local contact conditions". International Journal of Material Forming 3 SUPPL. 1 (2010): 139-142. http://www.scopus.com/inward/record.url?eid=2-s2.0-78651547638&partnerID=MN8TOARS.
    10.1007/s12289-010-0726-z
  47. Fernandes, JV; Antunes, JM; Sakharova, NA; Oliveira, MC; Menezes, LF. "Young's modulus of thin films using depth-sensing indentation". Philosophical Magazine Letters 90 1 (2010): 9-22.
    10.1080/09500830903334312
  48. Laurent, H; Greze, R; Oliveira, MC; Menezes, LF; Manach, PY; Alves, JL. "Numerical study of springback using the split-ring test for an AA5754 aluminum alloy". Finite Elements in Analysis and Design 46 9 (2010): 751-759.
    10.1016/j.finel.2010.04.004
  49. Thuillier, S; Manach, PY; Menezes, LF. "Occurence of strain path changes in a two-stage deep drawing process". Journal of Materials Processing Technology 210 2 (2010): 226-232.
    10.1016/j.jmatprotec.2009.09.004
  50. Buco, BD; Oliveira, MC; Alves, JL; Menezes, LF; Ito, K; Mori, N; Barlat, F; Moon, YH; Lee, MG. "Local Bifurcation and Instability Theory Applied to Formability Analysis". Numiform 2010, Vols 1 and 2 1252 (2010): 409-416.
    10.1063/1.3457584
  51. Neto, DM; Oliveira, MC; Alves, JL; Menezes, LF; Barlat, F; Moon, YH; Lee, MG. "Local Interpolation for Tools Surface Description". Numiform 2010, Vols 1 and 2 1252 (2010): 479-486.
    10.1063/1.3457593
  52. Rodrigues, DM; Leitao, C; Menezes, LF. "A multi-step analysis for determining admissible blank-holder forces in deep-drawing operations". Materials & Design 31 3 (2010): 1475-1481.
    10.1016/j.matdes.2009.08.028
  53. Hammami, W.; Padmanabhan, R.; Oliveira, M.C.; Belhadjsalah, H.; Alves, J.L.; Menezes, L.F.. "A deformation based blank design method for formed parts". International Journal of Mechanics and Materials in Design 5 4 (2009): 303-314. http://www.scopus.com/inward/record.url?eid=2-s2.0-74249093375&partnerID=MN8TOARS.
    10.1007/s10999-009-9103-9
  54. Padmanabhan, R.; Oliveira, M.C.; Laurent, H.; Alves, J.L.; Menezes, L.F.. "Study on springback in deep drawn tailor welded blanks". International Journal of Material Forming 2 SUPPL. 1 (2009): 829-832. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856058367&partnerID=MN8TOARS.
    10.1007/s12289-009-0566-x
  55. Padmanabhan, R.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Stochastic analysis of a deep drawing process using finite element simulations". International Journal of Material Forming 2 SUPPL. 1 (2009): 347-350. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856065791&partnerID=MN8TOARS.
    10.1007/s12289-009-0565-y
  56. Oliveira, M.C.; Padmanabhan, R.; Baptista, A.J.; Alves, J.L.; Menezes, L.F.. "Sensitivity study on some parameters in blank design". Materials and Design 30 4 (2009): 1223-1230. http://www.scopus.com/inward/record.url?eid=2-s2.0-57349199259&partnerID=MN8TOARS.
    10.1016/j.matdes.2008.06.010
  57. Padmanabhan, R.; Oliveira, M.C.; Baptista, A.J.; Alves, J.L.; Menezes, L.F.; Padmanabhan, R; Oliveira, MC; et al. "Numerical study on the influence of initial anisotropy on optimal blank shape". Finite Elements in Analysis and Design 45 2 (2009): 71-80. http://www.scopus.com/inward/record.url?eid=2-s2.0-56949103017&partnerID=MN8TOARS.
    10.1016/j.finel.2008.07.012
  58. Padmanabhan, R; Oliveira, MC; Baptista, AJ; Alves, JL; Menezes, LF; Padmanabhan, R.; Oliveira, M.C.; et al. "Blank design for deep drawn parts using parametric NURBS surfaces". Journal of Materials Processing Technology 209 5 (2009): 2402-2411. http://www.scopus.com/inward/record.url?eid=2-s2.0-59549104569&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2008.05.035|10.1016/j.jmatprotec.2008.05.035
  59. Padmanabhan, R.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Numerical simulation and analysis on the deep drawing of LPG bottles". Journal of Materials Processing Technology 200 1-3 (2008): 416-423. http://www.scopus.com/inward/record.url?eid=2-s2.0-39849107327&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2007.08.047
  60. Padmanabhan, R.; Sung, J.; Lim, H.; Oliveira, M.C.; Menezes, L.F.; Wagoner, R.H.. "Influence of draw restraining force on the springback in advanced high strength steels". International Journal of Material Forming 1 SUPPL. 1 (2008): 177-180. http://www.scopus.com/inward/record.url?eid=2-s2.0-78651563273&partnerID=MN8TOARS.
    10.1007/s12289-008-0020-5
  61. Antunes, J.M.; Fernandes, J.V.; Sakharova, N.A.; Menezes, L.F.. "Reverse analysis in depth-sensing indentation for evaluation of the Young's modulus of thin films". Philosophical Magazine 88 3 (2008): 313-325. http://www.scopus.com/inward/record.url?eid=2-s2.0-39149103357&partnerID=MN8TOARS.
    10.1080/14786430701832404
  62. Padmanabhan, R.; Oliveira, M.C.; Menezes, L.F.. "Deep drawing of aluminium-steel tailor-welded blanks". Materials and Design 29 1 (2008): 154-160. http://www.scopus.com/inward/record.url?eid=2-s2.0-34548695644&partnerID=MN8TOARS.
    10.1016/j.matdes.2006.11.007
  63. Chaparro, BM; Thuillier, S; Menezes, LF; Manach, PY; Fernandes, JV; Chaparro, B.M.; Thuillier, S.; et al. "Material parameters identification: Gradient-based, genetic and hybrid optimization algorithms". Computational Materials Science 44 2 (2008): 339-346. http://www.scopus.com/inward/record.url?eid=2-s2.0-55849091787&partnerID=MN8TOARS.
    10.1016/j.commatsci.2008.03.028|10.1016/j.commatsci.2008.03.028
  64. Oliveira, MC; Alves, JL; Menezes, LF; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Algorithms and strategies for treatment of large deformation frictional contact in the numerical simulation of deep drawing process". Archives of Computational Methods in Engineering 15 2 (2008): 113-162. http://www.scopus.com/inward/record.url?eid=2-s2.0-56749131810&partnerID=MN8TOARS.
    10.1007/s11831-008-9018-x|10.1007/s11831-008-9018-x
  65. Oliveira, M.C.; Alves, J.L.; Chaparro, B.M.; Menezes, L.F.; Oliveira, MC; Alves, JL; Chaparro, BM; Menezes, LF. "Study on the influence of work-hardening modeling in springback prediction". International Journal of Plasticity 23 3 (2007): 516-543. http://www.scopus.com/inward/record.url?eid=2-s2.0-33845328772&partnerID=MN8TOARS.
    10.1016/j.ijplas.2006.07.003
  66. Padmanabhan, R.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Influence of process parameters on the deep drawing of stainless steel". Finite Elements in Analysis and Design 43 14 (2007): 1062-1067. http://www.scopus.com/inward/record.url?eid=2-s2.0-35148856302&partnerID=MN8TOARS.
    10.1016/j.finel.2007.06.011
  67. Antunes, J.M.; Fernandes, J.V.; Sakharova, N.A.; Oliveira, M.C.; Menezes, L.F.; Antunes, JM; Fernandes, JV; et al. "On the determination of the Young's modulus of thin films using indentation tests". International Journal of Solids and Structures 44 25-26 (2007): 8313-8334. http://www.scopus.com/inward/record.url?eid=2-s2.0-35548945419&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2007.06.015
  68. Padmanabhan, R; Baptista, AJ; Oliveira, MC; Menezes, LF; Padmanabhan, R.; Baptista, A.J.; Oliveira, M.C.; Menezes, L.F.. "Effect of anisotropy on the deep-drawing of mild steel and dual-phase steel tailor-welded blanks". Journal of Materials Processing Technology 184 1-3 (2007): 288-293. http://www.scopus.com/inward/record.url?eid=2-s2.0-33846804007&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2006.11.051|10.1016/j.jmatprotec.2006.11.051
  69. Antunes, JM; Fernandes, JV; Menezes, LF; Chaparro, BM; Antunes, J.M.; Fernandes, J.V.; Menezes, L.F.; Chaparro, B.M.. "A new approach for reverse analyses in depth-sensing indentation using numerical simulation". Acta Materialia 55 1 (2007): 69-81. http://www.scopus.com/inward/record.url?eid=2-s2.0-33751505853&partnerID=MN8TOARS.
    10.1016/j.actamat.2006.08.019|10.1016/j.actamat.2006.08.019
  70. Antunes, J.M.; Menezes, L.F.; Fernandes, J.V.. "Influence of Vickers tip imperfection on depth sensing indentation tests". International Journal of Solids and Structures 44 9 (2007): 2732-2747. http://www.scopus.com/inward/record.url?eid=2-s2.0-33947123264&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2006.08.017
  71. Antunes, J.M.; Sakharova, N.A.; Fernandes, J.V.; Menezes, L.F.. "Strain and stress distribution in vickers indentation of coated materials". Materials Science Forum 514-516 PART 2 (2006): 1472-1476. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849033155&partnerID=MN8TOARS.
  72. Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Evolutional friction law in the numerical simulation of the deep drawing of a rail". Materials Science Forum 514-516 PART 2 (2006): 1443-1447. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849014862&partnerID=MN8TOARS.
  73. Andrade-Campos, A.; Menezes, L.F.; Teixeira-Dias, F.. "Numerical analysis of large deformation processes at elevated temperatures". Computer Methods in Applied Mechanics and Engineering 195 33-36 (2006): 3947-3959. http://www.scopus.com/inward/record.url?eid=2-s2.0-33646201371&partnerID=MN8TOARS.
    10.1016/j.cma.2005.07.023
  74. Antunes, J.M.; Menezes, L.F.; Fernandes, J.V.. "Three-dimensional numerical simulation of Vickers indentation tests". International Journal of Solids and Structures 43 3-4 (2006): 784-806. http://www.scopus.com/inward/record.url?eid=2-s2.0-28244456748&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2005.02.048
  75. Baptista, A.J.; Rodrigues, D.M.; Menezes, L.F.. "Influence of the weld on the mechanical behaviour of tailor welded blanks". Materials Science Forum 514-516 PART 2 (2006): 1493-1497. http://www.scopus.com/inward/record.url?eid=2-s2.0-33846817834&partnerID=MN8TOARS.
  76. Baptista, A.J.; Alves, J.L.; Rodrigues, D.M.; Menezes, L.F.. "Trimming of 3D solid finite element meshes using parametric surfaces: Application to sheet metal forming". Finite Elements in Analysis and Design 42 12 (2006): 1053-1060. http://www.scopus.com/inward/record.url?eid=2-s2.0-33745399278&partnerID=MN8TOARS.
    10.1016/j.finel.2006.03.005
  77. Bouvier, S.; Alves, J.L.; Menezes, L.F.; Oliveira, M.C.. "Characterizing the plastic anisotropy and its effect on sheet metal forming simulation". Computational Plasticity: Fundamentals and Applications - Proceedings of the 8th International Conference on Computational Plasticity, COMPLAS VIII PART 1 (2005): 291-294. http://www.scopus.com/inward/record.url?eid=2-s2.0-84857183858&partnerID=MN8TOARS.
  78. Bouvier, S.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "Modelling of anisotropic work-hardening behaviour of metallic materials subjected to strain-path changes". Computational Materials Science 32 3-4 (2005): 301-315. http://www.scopus.com/inward/record.url?eid=2-s2.0-12444252153&partnerID=MN8TOARS.
    10.1016/j.commatsci.2004.09.038
  79. Rodrigues, D.M.; Menezes, L.F.; Loureiro, A.. "Modelling the effect of HAZ undermatching on the crack-tip stress distribution in idealized welds". International Journal of Mechanical Sciences 46 10 (2004): 1481-1488. http://www.scopus.com/inward/record.url?eid=2-s2.0-9644252873&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2004.09.009
  80. Rodrigues, D.M.; Menezes, L.F.; Loureiro, A.. "The influence of the HAZ softening on the mechanical behaviour of welded joints containing cracks in the weld metal". Engineering Fracture Mechanics 71 13-14 (2004): 2053-2064. http://www.scopus.com/inward/record.url?eid=2-s2.0-1842634252&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2003.09.002
  81. Santos, A.D.; Reis, A.; Duarte, J.F.; Teixeira, P.; Rocha, A.B.; Oliveira, M.C.; Alves, J.L.; Menezes, L.. "A benchmark for validation of numerical results in sheet metal forming". Journal of Materials Processing Technology 155-156 1-3 (2004): 1980-1985. http://www.scopus.com/inward/record.url?eid=2-s2.0-10044270753&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2004.04.290
  82. Andrade-Campos, A.; Menezes, L.F.; Teixeira-Dias, F.. "Large deformation processes on AA1050-O aluminium at elevated temperatures". Materials Science Forum 455-456 (2004): 723-727. http://www.scopus.com/inward/record.url?eid=2-s2.0-16744368604&partnerID=MN8TOARS.
  83. Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Numerical analysis on the effects of the friction coefficient on the deep drawing of a rail". Materials Science Forum 455-456 (2004): 737-741. http://www.scopus.com/inward/record.url?eid=2-s2.0-16744363686&partnerID=MN8TOARS.
  84. Oliveira, M.C.; Menezes, L.F.. "Automatic correction of the time step in implicit simulations of the stamping process". Finite Elements in Analysis and Design 40 13-14 (2004): 1995-2010. http://www.scopus.com/inward/record.url?eid=2-s2.0-3142647430&partnerID=MN8TOARS.
    10.1016/j.finel.2004.01.009
  85. Antunes, J.M.; Menezes, L.F.; Fernandes, J.V.; Simões, M.I.. "Numerical simulation of ultramicrohardness tests in thin films". Materials Science Forum 455-456 (2004): 694-698. http://www.scopus.com/inward/record.url?eid=2-s2.0-16744362677&partnerID=MN8TOARS.
  86. Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "Springback evaluation with several phenomenological yield criteria". Materials Science Forum 455-456 (2004): 732-736. http://www.scopus.com/inward/record.url?eid=2-s2.0-16744365783&partnerID=MN8TOARS.
  87. Rodrigues, D.M.; Menezes, L.F.; Loureiro, A.; Fernandes, J.V.. "Numerical study of the plastic behaviour in tension of welds in high strength steels". International Journal of Plasticity 20 1 (2004): 1-18. http://www.scopus.com/inward/record.url?eid=2-s2.0-0141458111&partnerID=MN8TOARS.
    10.1016/S0749-6419(02)00112-2
  88. Rodrigues, D.M.; Menezes, L.F.; Loureiro, A.. "An investigation of the influence of strength mis-matching and HAZ width on the fracture behaviour of welds with cracks in the WM/HAZ interface". Materials Science Forum 455-456 (2004): 685-689. http://www.scopus.com/inward/record.url?eid=2-s2.0-16744362581&partnerID=MN8TOARS.
  89. Chaparro, B.M.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Work hardening models and the numerical simulation of the deep drawing process". Materials Science Forum 455-456 (2004): 717-722. http://www.scopus.com/inward/record.url?eid=2-s2.0-16744368564&partnerID=MN8TOARS.
  90. Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Improvement of a frictional contact algorithm for strongly curved contact problems". International Journal for Numerical Methods in Engineering 58 14 (2003): 2083-2101. http://www.scopus.com/inward/record.url?eid=2-s2.0-0346152781&partnerID=MN8TOARS.
    10.1002/nme.845
  91. Antunes, JM; Menezes, LF; Vieira, MF; Fernandes, JV; Trindade, B; Ramos, AS; Vieira, MT. "On the evaluation of the ductility of thin films". Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 337 1-2 (2002): 97-103.
    10.1016/S0921-5093(01)01991-8
  92. Antunes, J.M.; Menezes, L.F.; Fernandes, J.V.. "Numerical study of the influence of imperfection of the tip of a vickers indenter on ultramicrohardness test results". Key Engineering Materials 230-232 (2002): 525-528. http://www.scopus.com/inward/record.url?eid=2-s2.0-17644429788&partnerID=MN8TOARS.
  93. Thuillier, S.; Alves, J.L.; Menezes, L.F.; Manach, P.Y.. "Comparison of experimental and simulated results for a mild steel and a dual-phase steel deformed under tension and deep-drawing". Key Engineering Materials 230-232 (2002): 549-552. http://www.scopus.com/inward/record.url?eid=2-s2.0-18744418391&partnerID=MN8TOARS.
  94. Louro, C.; Teixeira-Dias, F.; Menezes, L.F.; Cavaleiro, A.. "Effect of the substrate thermal expansion coefficient on the thermal residual stresses in W-Si-N sputtered films". Key Engineering Materials 230-232 (2002): 513-516. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036436547&partnerID=MN8TOARS.
  95. Santos, A.D.; Ferreira Duarte, J.; Reis, A.; Barata da Rocha, A.; Menezes, L.; Oliveira, M.; Col, A.; Ono, T.. "Towards standard benchmarks and reference data for validation and improvement of numerical simulation in sheet metal forming". Journal of Materials Processing Technology 125-126 (2002): 798-805. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037047945&partnerID=MN8TOARS.
    10.1016/S0924-0136(02)00395-3
  96. Manach, P.Y.; Oliveira, M.C.; Thuillier, S.; Menezes, L.F.. "Reverse deep drawing: Experimental and numerical simulation results". Key Engineering Materials 230-232 (2002): 541-544. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036432403&partnerID=MN8TOARS.
  97. Rodrigues, D.M.; Menezes, L.F.; Loureiro, A.; Fernandes, J.V.. "Influence of plastic deformation of the heat affected zone on the mechanical behaviour of welds in high strength steels". Key Engineering Materials 233-236 II (2002): 791-796. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036949857&partnerID=MN8TOARS.
  98. Antunes, J.M.; Cavaleiro, A.; Menezes, L.F.; Simões, M.I.; Fernandes, J.V.. "Ultra-microhardness testing procedure with Vickers indenter". Surface and Coatings Technology 149 1 (2002): 27-35. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036147452&partnerID=MN8TOARS.
    10.1016/S0257-8972(01)01413-X
  99. Thuillier, S.; Manach, P.Y.; Menezes, L.F.; Oliveira, M.C.. "Experimental and numerical study of reverse re-drawing of anisotropic sheet metals". Journal of Materials Processing Technology 125-126 (2002): 764-771. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037047814&partnerID=MN8TOARS.
    10.1016/S0924-0136(02)00387-4
  100. Teixeira-Dias, F.; Menezes, L.F.. "A kinematic and incremental integration model for the micromechanical numerical analysis of dual-phase materials". Computational Materials Science 25 1-2 (2002): 237-245. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036713293&partnerID=MN8TOARS.
    10.1016/S0927-0256(02)00268-9
  101. Teixeira-Dias, F.; Menezes, L.F.. "Numerical determination of the influence of the cooling rate and reinforcement volume fraction on the levels of residual stresses in Al-SiC composites". Computational Materials Science 21 1 (2001): 26-36. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034916538&partnerID=MN8TOARS.
    10.1016/S0927-0256(00)00213-5
  102. Teixeira-Dias, F.; Menezes, L.F.. "Numerical aspects of finite element simulations of residual stresses in metal matrix composites". International Journal for Numerical Methods in Engineering 50 3 (2001): 629-644. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034746033&partnerID=MN8TOARS.
    10.1002/1097-0207(20010130)50:3<629::AID-NME41>3.0.CO;2-7
  103. Fernandes, J.V.; Trindade, A.C.; Menezes, L.F.; Cavaleiro, A.. "Influence of substrate hardness on the response of W-C-Co-coated samples to depth-sensing indentation". Journal of Materials Research 15 8 (2000): 1766-1772. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034256156&partnerID=MN8TOARS.
  104. Fernandes, J.-V.; Menezes, L.F.; Rodrigues, D.M.; Chaparro, B.M.; Vieira, M.F.. "Non-uniform deformation after prestrain". European Journal of Mechanics, A/Solids 19 2 (2000): 209-221. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034156749&partnerID=MN8TOARS.
    10.1016/S0997-7538(99)00146-1
  105. Fernandes, J.V.; Trindade, A.C.; Menezes, L.F.; Cavaleiro, A.. "A model for coated surface hardness". Surface and Coatings Technology 131 1-3 (2000): 457-461. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034535263&partnerID=MN8TOARS.
    10.1016/S0257-8972(00)00839-2
  106. Menezes, L.F.; Teodosiu, C.. "Three-dimensional numerical simulation of the deep-drawing process using solid finite elements". Journal of Materials Processing Technology 97 1-3 (2000): 100-106. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033877050&partnerID=MN8TOARS.
    10.1016/S0924-0136(99)00345-3
  107. Menezes, L.F.; Fernandes, J.V.; Rodrigues, D.M.; Menezes, LF; Fernandes, JV; Rodrigues, DM. "Numerical simulation of tensile tests of prestrained sheets". Materials Science and Engineering A 264 1-2 (1999): 130-138. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032664805&partnerID=MN8TOARS.
    10.1016/S0921-5093(98)01104-6
  108. Fernandes, J.V.; Rodrigues, D.M.; Menezes, L.F.; Vieira, M.F.. "A modified Swift law for prestrained materials". International Journal of Plasticity 14 6 (1998): 537-550. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032321095&partnerID=MN8TOARS.
  109. Fernandes, J.V.; Menezes, L.F.; Trindade, A.C.; Fernandes, JV; Menezes, LF; Trindade, AC. "The coated surface hardness: A kinematic model". Thin Solid Films 335 1-2 (1998): 153-159. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032318147&partnerID=MN8TOARS.
    10.1016/S0040-6090(98)00864-5
  110. Suéry, M.; Teodosiu, C.; Menezes, L.F.. "Thermal residual stresses in particle-reinforced viscoplastic metal matrix composites". Materials Science and Engineering A 167 1-2 (1993): 97-105. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027642966&partnerID=MN8TOARS.
    10.1016/0921-5093(93)90342-C
  111. DELIMA, AP; GIL, CL; MARTINS, DR; DECAMPOS, NA; MENEZES, LF; FERNANDES, JV. "POSITRON STUDIES IN POLYCRYSTALLINE DEFORMED COPPER". Crystal Research and Technology 22 11 (1987): K185-K190.
    10.1002/crat.2170221123
Capítulo de livro
  1. Maia, A.; Ferreira, E.; Oliveira, M.C.; Menezes, L.F.; Andrade-Campos, A.. "Numerical optimization strategies for springback compensation in sheet metal forming". 51-82. 2017.
Livro
  1. Nouira, M.; Oliveira, M.; Khalfallah, A.; Alves, J.; Menezes, L.. The Effect of the Loading Path History on the Fracture Loci. 2021.
    10.1007/978-3-030-52071-7_39
  2. Meriem, N.; Marta, O.; Ali, K.; José, A.; Luís, M.. Analysis on the Dependence of the Fracture Locus on the Pressure and the Lode Angle. 2020.
    10.1007/978-3-030-27146-6_59
  3. Barros, P.D.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. Earing prediction in drawing and ironing processes using an advanced yield criterion. 2013.
    10.4028/www.scientific.net/KEM.554-557.2266
  4. Simões, V.M.; Coër, J.; Laurent, H.; Oliveira, M.C.; Alves, J.L.; Manach, P.Y.; Menezes, L.F.. Sensitivity analysis of process parameters in the drawing and ironing Processes. 2013.
    10.4028/www.scientific.net/KEM.554-557.2256
  5. Neto, D.M.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.; Manach, P.Y.. Applying Nagata Patches in the Description of Smooth Tool Surfaces used in Sheet Metal Forming Simulations. 2013.
    10.4028/www.scientific.net/KEM.554-557.2277
  6. Aguir, H.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.; Belhadjsalah, H.. Cazacu and barlat criterion identification using the cylindrical cup deep drawing test and the coupled artificial neural networks-genetic algorithm method. 2012.
    10.4028/www.scientific.net/KEM.504-506.637
  7. Teixeira-Dias, F.; Menezes, L.F.. Thermal residual stresses in aluminium matrix composites. 2011.
    10.1007/8611_2010_1
  8. Ramalho, A.; Oliveira, M.C.; Menezes, L.F.. Sliding Friction: Global Versus Local Analysis. 2011.
    10.1002/9783527628513.ch19
  9. Padmanabhan, R.; Oliveira, M.C.; Menezes, L.F.. Lightweight metal alloy tailor welded blanks. 2011.
    10.1016/B978-1-84569-704-4.50005-8
  10. Chaparro, B.M.; Alves, J.L.; Menezes, L.F.; Fernandes, J.V.. Optimization of the phenomenological constitutive models parameters using genetic algorithms. 2007.
    10.1007/3-540-69845-0_3

Outros

Outra produção
  1. Detailed experimental and numerical analysis of a cylindrical cup deep drawing: Pros and cons of using solid-shell elements. 2017. Coër, J.; Laurent, H.; Oliveira, M.C.; Manach, P.-Y.; Menezes, L.F.. http://www.scopus.com/inward/record.url?eid=2-s2.0-85092828285&partnerID=MN8TOARS.
  2. Thermo-mechanical finite element analysis of the aa5086 alloy under warm forming conditions. 2017. Netoa, D.M.; Martins, J.M.P.; Cunha, P.M.; Alves, J.L.; Oliveira, M.C.; Laurent, H.; Menezes, L.F.. http://www.scopus.com/inward/record.url?eid=2-s2.0-85095029273&partnerID=MN8TOARS.