???global.info.a_carregar???
Elizaldo dos Santos is graduated in Mechanical Engineering by Federal University of Rio Grande (FURG) (2004), obtained his Master Science (2007) and Doctorate (2011) in Mechanical Engineering by University Federal of Rio Grande do Sul (UFRGS). He has experience in mechanical engineering with emphasis in fluid mechanics, heat transfer, thermodynamics, computational fluid dynamics, renewable energy and design. Currently, he is Associate Professor (Level III) of Federal University of Rio Grande (FURG) and permanent professor of Graduate Program of Computational Modeling (PPGMC) and Ocean Engineering (PPGEO). Since 2023 he is Senior Visiting Professor of Alma Mater Studiorum University of Bologna (UNIBO). The professor is member of the Brazilian Association of Engineering and Mechanical Sciences (ABCM) since 2015, participating of the technical committee of Engineering of Offshore and Petroleum since 2021. The professor is member of the advisory committee of Research Support Foundation of Rio Grande do Sul (FAPERGS) (2019 - 2024), serving as its coordinator since 2022. Moreover, the professor has acting as a reviewer of several indexed journals in Web of Science and Scopus, being Guest editor of the Journal of Marine Science and Engineering since 2019. Currently, His main research areas are: numerical analysis of turbulent flows, numerical analysis of convective heat transfer, heat exchangers, numerical analysis of main operational principle of renewable energy devices (wave energy, wind energy, solar chimneys, earth-air heat exchangers) and geometrical investigation of engineering problems with Constructal Design, coordinating founded projects in these research areas. Dr. dos Santos is also a member of the Complex Fluid Systems Lab, ICT, Portugal.
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Elizaldo dos Santos

Nomes de citação

  • Santos, Elizaldo
  • Dos Santos, E. D.;Santos, E. D.;Elizaldo D. dos Santos;dos Santos, E.D.;Santos D

Identificadores de autor

Ciência ID
991D-939E-C813
ORCID iD
0000-0003-4566-2350

Endereços de correio eletrónico

  • elizaldosantos@furg.br (Profissional)

Telefones

Telemóvel
  • (+55) 53 Ext.: 999702391 (Pessoal)

Moradas

  • Avenida Itália, km 8, 96203-900, Carreiros, Rio Grande, Brasil (Profissional)

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Português (Idioma materno)
Inglês Utilizador independente (B2) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador independente (B2) Utilizador proficiente (C1)
Espanhol; Castelhano Utilizador elementar (A2) Utilizador independente (B1) Utilizador elementar (A2) Utilizador independente (B1) Utilizador elementar (A2)
Italiano Utilizador elementar (A1) Utilizador elementar (A1) Utilizador elementar (A1) Utilizador elementar (A1) Utilizador elementar (A1)
Formação
Grau Classificação
2007/09/01 - 2011/07/22
Concluído
 Mechanical Engineering (Doctor)
Especialização em Transport Phenomena
Universidade Federal do Rio Grande do Sul, Brasil
"Numerical Analysis of Non-Reactive Turbulent Flows with Convection and Thermal Radiation Heat Transfer (In Portuguese)" (TESE/DISSERTAÇÃO)
2006/03/01 - 2007/08/31
Concluído
 Mechanical Engineering (Master)
Especialização em Transport Phenomena
Universidade Federal do Rio Grande do Sul, Brasil
"Analysis of Non-isothermal , incompressible flows, using Large Eddy Simulation and the Finite Element Method" (TESE/DISSERTAÇÃO)
2000/03/01 - 2004/12/01
Concluído
 Mechanical Engineering (Bachelor)
Especialização em Transport Phenomena
Universidade Federal do Rio Grande, Brasil
"Geometrical Optimization of Cavities Inserted in a Solid Wall with Internal Heat Generation using the Constuctal Theory (In Portuguese)" (TESE/DISSERTAÇÃO)
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento		 Empregador
2009/08/01 - Atual Professor Associado (Docente Universitário) Universidade Federal do Rio Grande, Brasil
Universidade Federal do Rio Grande, Brasil
Projetos

Projeto

Designação Financiadores
2020/01/01 - 2023/12/31 INSTITUTO DE CIÊNCIAS DA TERRA
UIDB/04683/2020
10.54499/UIDB/04683/2020
Universidade do Minho, Portugal

Instituto de Ciências da Terra, Portugal

Universidade de Évora, Portugal

Universidade do Porto Faculdade de Ciências, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2020/01/01 - 2023/12/31 INSTITUTO DE CIÊNCIAS DA TERRA
UIDP/04683/2020
10.54499/UIDP/04683/2020
Universidade do Minho, Portugal

Instituto de Ciências da Terra, Portugal

Universidade de Évora, Portugal

Universidade do Porto Faculdade de Ciências, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
Produções

Publicações

Artigo em conferência
  1. Da Silveira, T.; Neufeld, J.P.S.; Rocha, L.A.O.; Dos Santos, E.D.; Isoldi, L.A.. "Numerical analysis of biaxial elasto-plastic buckling of perforated rectangular steel plates applying the Constructal Design method". 2021.
    10.1088/1757-899X/1048/1/012017
  2. Gill V. Gonzales; Elizaldo D. Dos Santos; Diana F. Adamatti; Antônio J. Silva Neto. "A Netlogo and Matlab Hybrid Approach for Constructal Design of the Double-T Shaped Cavity by Means of Simulated Annealing". 2018.
    10.5540/03.2018.006.01.0300
  3. Ca´ssia Beckel; Luiz Rocha; Lie´rcio Isoldi; Elizaldo Dos Santos. "Estudo Nume´rico de Caminhos Altamente Condutivos em Forma de Y para Arrefecimento de Corpos com Gerac¸a~o de Calor". 2017.
    10.5540/03.2017.005.01.0174
  4. Andrei Santos; Dante Vinícius Eloy Barbosa; jeferson Avila Souza; Elizaldo dos Santos. "OWC SIMULATION COMPARISON BETWEEN TURBULENT AND LAMINAR MODELS USING OPENFOAM CODE". 2017.
    10.26678/abcm.cobem2017.cob17-1379
  5. Ruth Brum; Liércio Isoldi; Jairo Ramalho; Luiz Alberto Oliveira Rocha; Elizaldo dos Santos. "A CONSTRUCTAL DESIGN OF EARTH-AIR HEAT EXCHANGERS COMPOSED BY FOUR DUCTS". 2016.
    10.26678/abcm.encit2016.cit2016-0168
  6. Gabriel Moraes Barros; Martim dos Santos Pereira; Diego Mión do Carmo; Rafael Cemin; Liércio André Isoldi; Luiz Alberto Oliveira Rocha; Elizaldo Domingues dos Santos. "GEOMETRICAL OPTIMIZATION OF MIXED CONVECTIVE FLOWS OVER TRIANGULAR ARRANGEMENT OF CYLINDERS". 2015.
    10.20906/cps/cob-2015-2229
  7. Jaifer Corrêa Martins; Dante Vinícius Eloy Barbosa; Marcelo Moraes Goulart; Jeferson Avila Souza; Luiz Alberto Oliveira Rocha; Mateus das Neves Gomes; Liércio André Isoldi; Elizaldo Domingues dos Santos. "CONSTRUCTAL DESIGN OF AN ONSHORE OVERTOPPING DEVICE IN REAL SCALE FOR TWO DIFFERENT OCEAN WAVE PERIODS AND DIFFERENT AREAS OF THE RAMP". 2015.
    10.20906/cps/cilamce2015-0197
  8. Gill Velleda Gonzales; Elizaldo Domingues dos Santos; Liércio André Isoldi; Emanuel da Silva Diaz Estrada; Luiz Alberto Oliveira Rocha. "Constructal Design of Isothermal Shaped Cavity Double-T by Means of Simulated Annealing". 2015.
    10.20906/cps/cilamce2015-0582
  9. Renata Costa de Almeida Alonso; Vinícius Amaral Altê; Elizaldo Domingues dos Santos; Mauro de Vasconcellos Real; Liércio André Isoldi; Luiz Alberto Oliveira Rocha; João Paulo Silva Lima Lima. "ANÁLISE NUMÉRICA DO COMPORTAMENTO MECÂNICO DE TUBOS ESTRUTURAIS COM PERFURAÇÕES SUBMETIDOS À FLAMBAGEM ELÁSTICA ATRAVÉS DO MÉTODO CONSTRUCTALDESIGN". 2015.
    10.20906/cps/cilamce2015-0573
  10. Cássia C. Beckel; Eduardo X. Barreto; Luiz A. O. Rocha; Liércio André Isoldi; Elizaldo Domingues dos Santos. "CONSTRUCTAL DESIGN OF I-SHAPED PATHWAY FOR COOLING A HEAT GENERATING BODY BY CONDUCTION AND CONVECTION". 2015.
    10.20906/cps/cob-2015-0984
  11. Jaifer Corrêa Martins; Marcelo Moraes Goulart; Jeferson Avila Souza; Liércio André Isoldi; Elizaldo Domingues dos Santos; Mateus das Neves Gomes; Luiz Alberto Oliveira Rocha. "CONSTRUCTAL DESIGN OF AN ONSHORE OVERTOPPING DEVICE IN REAL SCALE FOR DIFFERENT RAMP CONSTRUCTION AREAS". 2015.
    10.20906/cps/cob-2015-2255
  12. Camila Rosa Vaz; Michel Kepes Rodrigues; Elizaldo Domingues dos Santos; Ruth da Silva Brum; Luiz Alberto Oliveira Rocha; Liércio André Isoldi. "ANÁLISE NUMÉRICA DA INFLUÊNCIA DA CONFIGURAÇÃO GEOMETRICA DE UMA INSTALAÇÃO DE TROCADOR DE CALOR SOLO-AR EM SEU POTENCIAL TÉRMICO EMPREGANDO O MÉTODO CONSTRUCTAL DESIGN". 2015.
    10.20906/cps/cilamce2015-0482
  13. Yuri Theodoro Barbosa de Lima; Mateus das Neves Gomes; Liércio André Isoldi; Elizaldo Domingues dos Santos; Luiz Alberto Oliveira Rocha. "Análise geométrica com Constructal Design da restrição da turbina de um dispositivo de energia das ondas do mar do tipo CAO". 2015.
    10.20906/cps/cilamce2015-0256
  14. Martim Pereyra; Gabriel Barros; Maicon Almeida; Rafael Lempek; Luiz Rocha; Liércio Isoldi; Elizaldo dos Santos. "CONSTRUCTAL DESIGN DE CANAIS COM SECÇÃO TRANSVERSAL EM FORMA DE "T" EM ESCOAMENTOS LAMINARES COM CONVECÇÃO FORÇADA". 2015.
    10.20906/cps/cilamce2015-0539
  15. Rodrigo Spotorno Vieira; Christopher Garcia; Luiz Alberto Oliveira Rocha; Liércio André Isoldi; Elizaldo Domingues dos Santos; Mateus das Neves Gomes Gomes. "Constructal Design of Available Power of a Solar Chimney at Different Imposed Ground Temperature". 2015.
    10.20906/cps/cilamce2015-0368
  16. Fabiane Valente Harter; Elizaldo Domingues dos Santos; Liércio André Isoldi; Jeferson Avila Souza; Sandro Campos Amico. "Numerical technique for determination of transverse permeability in RTM composites". 2015.
    10.20906/cps/cob-2015-2012
  17. Vagner Andrade Pedrotti; Jeferson Avila Souza; Elizaldo Domingues dos Santos; Liércio André Isoldi. "THERMAL ANALISYS AND GEOMETRIC OPTIMIZATION OF A TUBULAR ARRAY USING CONSTRUCTAL DESIGN". 2015.
    10.20906/cps/cob-2015-2214
  18. Dante Barbosa; Daniel dos Santos; Marcelo Goulart; Jeferson Souza; Otávio Carvalho; Elizaldo dos Santos; Liércio Isoldi. "Numerical Simulation and Solution Verification of an Overtopping Wave Energy Converter". 2015.
    10.20906/cps/cilamce2015-0500
  19. Mateus das Neves Gomes Gomes; Beatriz Leandro Bonafini Bonafini; Leandro Ferres Cassel Cassel; Liércio André Isoldi Isoldi; Elizaldo Domingues dos Santos Santos; Luiz Alberto Oliveira Rocha Rocha. "Otimização geométrica de um dispositivo conversor de energia das ondas do mar do tipo Coluna de Água Oscilante na forma trapezoidal". 2015.
    10.20906/cps/cilamce2015-0151
  20. Roberta da Silva Michaello; Mauro de Vasconcellos Real; Elizaldo Domingues dos Santos; Liércio André Isoldi; Daniel Helbig; Luiz Alberto Oliveira Rocha. "MODELAGEM COMPUTACIONAL E MÉTODO CONSTRUCTAL DESIGN APLICADOS À ANÁLISE DA FLAMBAGEM TÉRMICA DE COLUNAS DE AÇO PERFURADAS". 2015.
    10.20906/cps/cilamce2015-0590
  21. Ruth da Silva Brum; Mariane Sulzbacher; Luiz Alberto Oliveira Rocha; Liércio André Isoldi; Michel Kepes Rodrigues; Elizaldo Domingues dos Santos. "Otimização Geométrica de Trocadores de Calor Solo-Ar baseada na lei Constructal". 2015.
    10.20906/cps/cilamce2015-0523
  22. Caio Cesar Cardoso da Silva; Elizaldo Domingues dos Santos; Mauro de Vasconcellos Real; Liércio André Isoldi; Daniel Helbig; Luiz Alberto Oliveira Rocha. "NUMERICAL ANALYSIS OF PERFORATED STEEL PLATES SUBJECTED TO ELASTIC AND ELASTO-PLASTIC BUCKLING BY MEANS THE CONSTRUCTAL DESIGN METHOD". 2015.
    10.20906/cps/cob-2015-1204
  23. Rodrigo Spotorno Vieira; Christopher Garcia; Jeferson Avila Souza; Luiz Alberto Oliveira Rocha; Liércio André Isoldi; Elizaldo Domingues dos Santos. "NUMERICAL STUDY ABOUT THE INFLUENCE OF GEOMETRIC PARAMETERS ON THE AVALIABLE POWER IN A SOLAR CHIMNEY BY MEANS OF CONSTRUCTAL DESIGN". 2015.
    10.20906/cps/cob-2015-2311
  24. Caio Cesar Cardoso da Silva; Elizaldo Domingues dos Santos; Mauro de Vasconcellos Real; Liércio André Isoldi; Daniel Helbig; Luíz Alberto Oliveira Rocha. "SIMULAÇÃO NUMÉRICA E MÉTODO CONSTRUCTAL DESIGN APLICADOS AO ESTUDO DE FLAMBAGEM EM PLACAS DE AÇO PERFURADAS". 2015.
    10.20906/cps/cilamce2015-0383
  25. Isoldi, L.A.; De Real, M.V.; Vaz, J.; Correia, A.L.G.; Dos Santos, E.D.; Rocha, L.A.O.. "Numerical analysis of perforated thin plates subjected to tension or buckling". 2012.
    10.1109/NAVTEC.2012.11
  26. De Oliveira, L.O.; Teixeira, P.R.F.; Dos Santos, E.D.; Isoldi, L.A.. "Constructal design applied to the geometric optimization of the hydropneumatic chamber dimensions of an Oscillating Water Column wave energy device". 2012.
  27. Do Grimmler, J.A.M.; Da Lopes, N.R.; Das Gomes, M.N.; Souza, J.A.; Dos Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.. "Análise numérica da influência da forma da câmara em um dispositivo CAO para conversão da energia das ondas do mar em energia elétrica". 2012.
    10.1109/NAVTEC.2012.13
  28. Gomes, M.N.; Isoldi, L.A.; Dos Santos, E.D.; Souza, J.A.; Rocha, L.A.O.. "Numerical study of the efficiency of an oscillating water column (OWC) device". 2010.
  29. Dos Santos, E.D.; Acunha, I.C.; Schneider, P.S.. "Liquified natural gas energy recovery in refrigeration cycles". 2009.
  30. Dos Santos, E.D.; Galarça, M.M.; Mossi, A.C.; Petry, A.P.; França, F.H.R.. "A numerical study of the influence of temperature fluctuations in the thermal radiation field". 2009.
    10.1109/MCSUL.2009.12
  31. Vergara, L.C.; Rocha, L.A.O.; Dos Santos, E.D.. "Thermal optimization of circular bodies submitted to an intense heat flux by constructal design". 2009.
    10.1109/MCSUL.2009.10
  32. Farias, R.M.; Rocha, L.A.O.; Dos Santos, E.D.. "Numerical study of reservoir cooling by means of peltier effect". 2009.
    10.1109/MCSUL.2009.15
  33. Marques, C.H.; Rocha, L.A.O.; Dos Santos, E.D.. "Constructal design applied to the optimization of heat transfer in a solid conducting wall". 2009.
    10.1109/MCSUL.2009.9
Artigo em revista
  1. Glauciléia Maria Cardoso Magalhães; Jeferson Avila Souza; Elizaldo Domingues dos Santos. "A Constructal-Theory-Based Methodology to Determine the Configuration of Empty Channels Used in the Resin Impregnation of a Square Porous Plate". Fluids (2023): https://doi.org/10.3390/fluids8120317.
    10.3390/fluids8120317
  2. Paula Wrague Moura; Leonardo Rodrigues Leite; Márcio Wrague Moura; Luiz Alberto Oliveira Rocha; Elizaldo Domingues dos Santos; Ruth da Silva Brum; Liércio André Isoldi. "Avaliação numérica do desempenho térmico de trocador de calor solo-ar em habitação de interesse social nas zonas bioclimáticas brasileiras ZB 3 e ZB 4". Ciência e Natura (2023): https://doi.org/10.5902/2179460X74487.
    10.5902/2179460X74487
  3. Guilherme Ribeiro Baumgardt; Mauro de Vasconcellos Real; Paulo Roberto de Freitas Teixeira; Elizaldo Domingues dos Santos; Thiago da Silveira; Liércio André Isoldi. "Computational model verification and numerical analysis of plate buckling due to combined loading". Ciência e Natura (2023): https://doi.org/10.5902/2179460X75137.
    10.5902/2179460X75137
  4. Diego Mion do Carmo; Liércio André Isoldi; Luiz Alberto Oliveira Rocha; Marcelo Risso Errera; Elizaldo Domingues dos Santos. "Application of constructal theory for the construction of an arrangement of heated blocks inserted in a channel subject to flows with forced convection". Ciência e Natura (2023): https://doi.org/10.5902/2179460X74568.
    10.5902/2179460X74568
  5. Rafael Pereira Maciel; Phelype Haron Oleinik; Elizaldo Domingues Dos Santos; Luiz Alberto Oliveira Rocha; Bianca Neves Machado; Mateus das Neves Gomes; Liércio André Isoldi. "Constructal Design Applied to an Oscillating Water Column Wave Energy Converter Device under Realistic Sea State Conditions". Journal of Marine Science and Engineering (2023): https://doi.org/10.3390/jmse11112174.
    10.3390/jmse11112174
  6. Ana Paula Giussani Mocellin; Rafael Pereira Maciel; Phelype Haron Oleinik; Elizaldo Domingues dos Santos; Luiz Alberto Oliveira Rocha; Juliana Sartori Ziebell; Liércio André Isoldi; Bianca Neves Machado. "Geometrical Analysis of an Oscillating Water Column Converter Device Considering Realistic Irregular Wave Generation with Bathymetry". Journal of Experimental and Theoretical Analyses (2023): https://doi.org/10.3390/jeta1010003.
    10.3390/jeta1010003
  7. Flavio Medeiros Seibt; Elizaldo Domingues dos Santos; Liércio André Isoldi; Luiz Alberto Oliveira Rocha. "Constructal Design on full-scale numerical model of a submerged horizontal plate-type wave energy converter". Marine Systems & Ocean Technology (2023): https://doi.org/10.1007/s40868-023-00124-7.
    10.1007/s40868-023-00124-7
  8. Andrei Luís Garcia Santos; Adriane Prisco Petry; Liércio André Isoldi; Gustavo da Cunha Dias; Jeferson Avila Souza; Elizaldo Domingues dos Santos. "Development of a Computational Model for the Simulation of an Oscillating Water Column Wave Energy Converter Considering a Savonius Turbine". Defect and Diffusion Forum (2023): https://doi.org/10.4028/p-C8qvgv.
    10.4028/p-C8qvgv
  9. Glauciléia Maria Cardoso Magalhães; Marcello Lovison Chiomento; Liércio André Isoldi; Jeferson Avila Souza; Elizaldo Domingues dos Santos. "Constructal Theory Applied to the Growth of Injection Channels in a Liquid Resin Infusion Problem". Defect and Diffusion Forum (2023): https://doi.org/10.4028/p-26iX9b.
    10.4028/p-26iX9b
  10. Rafael Pereira Maciel; Bianca Neves Machado; Phelype Haron Oleinik; Elizaldo Domingues dos Santos; Mateus das Neves Gomes; Liércio André Isoldi. "Investigation of Numerical Irregular Wave Generation Using Transient Discrete Data as Boundary Conditions of Prescribed Velocity". Defect and Diffusion Forum (2023): https://doi.org/10.4028/p-s0MLH2.
    10.4028/p-s0MLH2
  11. Giovanni Antonio Vielma Vivas; Michel Kepes Rodrigues; Luiz Alberto Oliveira Rocha; Elizaldo Domingues dos Santos; Ruth da Silva Brum; Liércio André Isoldi. "Computational Modeling of an Earth-Air Heat Exchanger Integrated with Phase Change Materials: A Case Study Performed for the Viamão City, Rio Grande do Sul State, Brazil". Defect and Diffusion Forum (2023): https://doi.org/10.4028/p-n7qBvb.
    10.4028/p-n7qBvb
  12. Guilherme Baumgardt; Cristiano Fragassa; Luiz Rocha; Elizaldo dos Santos; Thiago da Silveira; Liércio Isoldi. "Computational Model Verification and Validation of Elastoplastic Buckling Due to Combined Loads of Thin Plates". Metals (2023): https://doi.org/10.3390/met13040731.
    10.3390/met13040731
  13. Andréia S. de Barros; Cristiano Fragassa; Maycon da S. Paiva; Luiz A. O. Rocha; Bianca N. Machado; Liércio A. Isoldi; Mateus das N. Gomes; Elizaldo D. dos Santos. "Numerical Study and Geometrical Investigation of an Onshore Overtopping Device Wave Energy Converter with a Seabed Coupled Structure". Journal of Marine Science and Engineering (2023): https://doi.org/10.3390/jmse11020412.
    10.3390/jmse11020412
  14. Gill Velleda Gonzales; Cesare Biserni; Emanuel da Silva Diaz Estrada; Gustavo Mendes Platt; Liércio André Isoldi; Luiz Alberto Oliveira Rocha; Antônio José da Silva Neto; Elizaldo Domingues dos Santos. "Investigation on the Association of Differential Evolution and Constructal Design for Geometric Optimization of Double Y-Shaped Cooling Cavities Inserted into Walls with Heat Generation". Applied Sciences (2023): https://doi.org/10.3390/app13031998.
    10.3390/app13031998
  15. Lenon A. Cisco; Rafael P. Maciel; Phelype H. Oleinik; Elizaldo D. dos Santos; Mateus N. Gomes; Luiz A. O. Rocha; Liércio A. Isoldi; Bianca N. Machado. "Numerical Analysis of the Available Power in an Overtopping Wave Energy Converter Subjected to a Sea State of the Coastal Region of Tramandaí, Brazil". Fluids (2022): https://doi.org/10.3390/fluids7110359.
    10.3390/fluids7110359
  16. Jaifer Correa Martins; Marcelo Moraes Goulart; Elizaldo Domingues dos Santos; Liércio André Isoldi; Mateus das Neves Gomes; Luiz Alberto Oliveira Rocha. "Constructal Design of a Two Ramps Overtopping Wave Energy Converter Integrated into a Breakwater: Effect of the Vertical Distance between the Ramps over its Performance". Defect and Diffusion Forum (2022): https://doi.org/10.4028/p-408n90.
    10.4028/p-408n90
  17. Ricardo G. Hubner; Cristiano Fragassa; Maycon da S. Paiva; Phelype H. Oleinik; Mateus das N. Gomes; Luiz A. O. Rocha; Elizaldo D. dos Santos; Bianca N. Machado; Liércio A. Isoldi. "Numerical Analysis of an Overtopping Wave Energy Converter Subjected to the Incidence of Irregular and Regular Waves from Realistic Sea States". Journal of Marine Science and Engineering (2022): https://doi.org/10.3390/jmse10081084.
    10.3390/jmse10081084
  18. Lucas Costa Victoria; Igor Silva Vaz; Juliana Costi; Luiz Alberto Oliveira Rocha; Elizaldo Domingues dos Santos; Michel Kepes Rodrigues; Liércio André Isoldi. "Estudo numérico de desempenho de trocadores de calor solo-ar em cidades do Rio Grande do Sul". Ciência e Natura (2022): https://doi.org/10.5902/2179460X66677.
    10.5902/2179460X66677
  19. Laísa Luiz Soares; Cesare Biserni; Roger da Rosa Costa; João Américo Aguirre Oliveira Júnior; Elizaldo Domingues dos Santos; Marcelo Moraes Galarça. "Numerical Study and Geometric Investigation of the Influence of Rectangular Baffles over the Mixture of Turbulent Flows into Stirred Tanks". Applied Sciences 12 10 (2022): 4827-4827. https://doi.org/10.3390/app12104827.
    10.3390/app12104827
  20. Michel Kepes Rodrigues; Joaquim Vaz; Luiz Alberto Oliveira Rocha; Elizaldo Domingues dos Santos; Liércio André Isoldi. "A full approach to Earth-Air Heat Exchanger employing computational modeling, performance analysis and geometric evaluation". Renewable Energy (2022): https://doi.org/10.1016/j.renene.2022.04.007.
    10.1016/j.renene.2022.04.007
  21. Jaifer Corrêa Martins; Cristiano Fragassa; Marcelo Moraes Goulart; Elizaldo Domingues dos Santos; Liércio André Isoldi; Mateus das Neves Gomes; Luiz Alberto Oliveira Rocha. "Constructal Design of an Overtopping Wave Energy Converter Incorporated in a Breakwater". Journal of Marine Science and Engineering 10 4 (2022): 471-471. https://doi.org/10.3390/jmse10040471.
    10.3390/jmse10040471
  22. Amanda Lopes dos Santos; Cristiano Fragassa; Andrei Luís Garcia Santos; Rodrigo Spotorno Vieira; Luiz Alberto Oliveira Rocha; José Manuel Paixão Conde; Liércio André Isoldi; Elizaldo Domingues dos Santos. "Development of a Computational Model for Investigation of and Oscillating Water Column Device with a Savonius Turbine". Journal of Marine Science and Engineering (2022): https://doi.org/10.3390/jmse10010079.
    10.3390/jmse10010079
  23. El Halal, Y.B.; Marques, C.H.; Lemos, R.D.L.; Günes, Ü.; Rocha, L.A.O.; Isoldi, L.A.; dos Santos, E.D.. "Analysis of geometric and non-geometric parameters in a Coanda device for marine applications". Ocean Engineering 244 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85121922683&partnerID=MN8TOARS.
    10.1016/j.oceaneng.2021.110337
  24. Pinto, V.T.; Rocha, L.A.O.; Dos Santos, E.D.; Isoldi, L.A.. "Numerical analysis of stiffened plates subjected to transverse uniform load through the constructal design method". Engineering Solid Mechanics 10 1 (2022): 99-108. http://www.scopus.com/inward/record.url?eid=2-s2.0-85122146555&partnerID=MN8TOARS.
    10.5267/j.esm.2021.9.001
  25. dos Santos, Amanda Lopes; Fragassa, Cristiano; Santos, Andrei Luís Garcia; Vieira, Rodrigo Spotorno; Rocha, Luiz Alberto Oliveira; Conde, José Manuel Paixão; Isoldi, Liércio André; dos Santos, Elizaldo Domingues. "Development of a Computational Model for Investigation of and Oscillating Water Column Device with a Savonius Turbine". (2022): http://hdl.handle.net/10362/142840.
    https://doi.org/10.3390/jmse10010079
  26. dos Santos, Amanda Lopes; Fragassa, Cristiano; Santos, Andrei Luís Garcia; Vieira, Rodrigo Spotorno; Rocha, Luiz Alberto Oliveira; Conde, José Manuel Paixão; Isoldi, Liércio André; dos Santos, Elizaldo Domingues. "Development of a Computational Model for Investigation of and Oscillating Water Column Device with a Savonius Turbine". (2022): http://hdl.handle.net/10362/142840.
    https://doi.org/10.3390/jmse10010079
  27. dos Santos, Amanda Lopes; Fragassa, Cristiano; Santos, Andrei Luís Garcia; Vieira, Rodrigo Spotorno; Rocha, Luiz Alberto Oliveira; Conde, José Manuel Paixão; Isoldi, Liércio André; dos Santos, Elizaldo Domingues. "Development of a Computational Model for Investigation of and Oscillating Water Column Device with a Savonius Turbine". (2022): http://hdl.handle.net/10362/142840.
    https://doi.org/10.3390/jmse10010079
  28. Fábio Luiz da Costa Carrir; Cesare Biserni; Danilo Barreto Aguiar; Elizaldo Domingues dos Santos; Ivoni Carlos Acunha Júnior. "Implementation of a Floating Head Pressure Condensation Control to Reduce Electrical Energy Consumption in an Industrial Refrigeration System". Applied Sciences (2021): https://doi.org/10.3390/app112411923.
    10.3390/app112411923
  29. Yuri Theodoro Barbosa de Lima; Mateus das Neves Gomes; Liércio André Isoldi; Elizaldo Domingues dos Santos; Giulio Lorenzini; Luiz Alberto Oliveira Rocha. "Geometric Analysis through the Constructal Design of a Sea Wave Energy Converter with Several Coupled Hydropneumatic Chambers Considering the Oscillating Water Column Operating Principle". Applied Sciences 11 18 (2021): 8630-8630. https://doi.org/10.3390/app11188630.
    10.3390/app11188630
  30. Rafael P. Maciel; Cristiano Fragassa; Bianca N. Machado; Luiz A. O. Rocha; Elizaldo D. dos Santos; Mateus N. Gomes; Liércio A. Isoldi. "Verification and Validation of a Methodology to Numerically Generate Waves Using Transient Discrete Data as Prescribed Velocity Boundary Condition". Journal of Marine Science and Engineering 9 8 (2021): 896-896. https://doi.org/10.3390/jmse9080896.
    10.3390/jmse9080896
  31. Moreira, R.S.M.; Escobar, C.C.; Isoldi, L.A.; Davesac, R.R.; Rocha, L.A.O.; Santos, E.D.D.. "Numerical Study and Geometric Investigation of Corrugated Channels Subjected to Forced Convective Flows". Journal of Applied and Computational Mechanics 7 2 (2021): 727-738. http://www.scopus.com/inward/record.url?eid=2-s2.0-85103658522&partnerID=MN8TOARS.
    10.22055/jacm.2020.35345.2634
  32. Gomes, M.N.; Salvador, H.; Magno, F.; Rodrigues, A.A.; Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.. "Constructal design applied to geometric shapes analysis of wave energy converters". Defect and Diffusion Forum 407 (2021): 147-160. http://www.scopus.com/inward/record.url?eid=2-s2.0-85102397397&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.407.147
  33. Silveira, T.D.; Pinto, V.T.; Neufeld, J.P.S.; Pavlovic, A.; Rocha, L.A.O.; Santos, E.D.D.; Isoldi, L.A.. "Applicability Evidence of Constructal Design in Structural Engineering: Case Study of Biaxial Elasto-Plastic Buckling of Square Steel Plates with Elliptical Cutout". Journal of Applied and Computational Mechanics 7 2 (2021): 922-934. http://www.scopus.com/inward/record.url?eid=2-s2.0-85103676264&partnerID=MN8TOARS.
    10.22055/jacm.2021.35385.2647
  34. Nunes, B.R.; Rodrigues, M.K.; Oliveira Rocha, L.A.; Labat, M.; Lorente, S.; dos Santos, E.D.; Isoldi, L.A.; Biserni, C.. "Numerical-analytical study of earth-air heat exchangers with complex geometries guided by constructal design". International Journal of Energy Research 45 15 (2021): 20970-20987. http://www.scopus.com/inward/record.url?eid=2-s2.0-85112370474&partnerID=MN8TOARS.
    10.1002/er.7157
  35. Razera, A.L.; da Fonseca, R.J.C.; Isoldi, L.A.; dos Santos, E.D.; Rocha, L.A.O.; Biserni, C.. "A constructal approach applied to the cooling of semi-elliptical blocks assembled into a rectangular channel under forced convection". International Journal of Heat and Mass Transfer (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85120733281&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2021.122293
  36. Rodrigues, G.C.; Lorenzini, G.; Victoria, L.C.; Vaz, I.S.; Rocha, L.A.O.; dos Santos, E.D.; Rodrigues, M.K.; Estrada, E.D.S.D.; Isoldi, L.A.. "Constructal design applied to the geometric evaluation of a T-shaped Earth-Air Heat Exchanger". International Journal of Sustainable Development and Planning 16 2 (2021): 207-217. http://www.scopus.com/inward/record.url?eid=2-s2.0-85105816836&partnerID=MN8TOARS.
    10.18280/IJSDP.160201
  37. Pinto, V.; Cunha, M.; Martins, K.; Rocha, L.; Dos Santos, E.; Isoldi, L.. "Bending of stiffened plates considering different stiffeners orientations". Magazine of Civil Engineering 103 3 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85098485240&partnerID=MN8TOARS.
    10.34910/MCE.103.10
  38. Gonzales, G.V.; Lorenzini, G.; Isoldi, L.A.; Rocha, L.A.O.; dos Santos, E.D.; Neto, A.J.S.. "Constructal Design and Simulated Annealing applied to the geometric optimization of an isothermal Double T-shaped cavity". International Journal of Heat and Mass Transfer 174 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85104390062&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2021.121268
  39. Teixeira, F.B.; Biserni, C.; Conde, P.V.; Rocha, L.A.O.; Isoldi, L.A.; dos Santos, E.D.. "Geometrical investigation of bluff bodies array subjected to forced convective flows for different aspect ratios of frontal body". International Journal of Thermal Sciences 161 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85096909922&partnerID=MN8TOARS.
    10.1016/j.ijthermalsci.2020.106724
  40. Lemos, R.L.; Marques, C.H.; El Halal, Y.B.; dos Santos, E.D.. "Two novel marine thruster concepts based on the Coanda effect". Marine Systems and Ocean Technology 16 1 (2021): 14-22. http://www.scopus.com/inward/record.url?eid=2-s2.0-85101170165&partnerID=MN8TOARS.
    10.1007/s40868-021-00092-w
  41. Nogueira, C.M.; Pinto, V.T.; Rocha, L.A.O.; Dos Santos, E.D.; Isoldi, L.A.. "Numerical simulation and constructal design applied to plates with different heights of traverse and longitudinal stiffeners". Engineering Solid Mechanics 9 2 (2021): 221-238. http://www.scopus.com/inward/record.url?eid=2-s2.0-85099707019&partnerID=MN8TOARS.
    10.5267/j.esm.2020.12.001
  42. Machado, Bianca Neves; Oleinik, Phelype Haron; Kirinus, Eduardo De Paula; Santos, Elizaldo Domingues Dos; Rocha, Luiz Alberto Oliveira; Gomes, Mateus Das Neves; Conde, José Manuel Paixão; Isoldi, Liércio André. "WaveMIMO Methodology". (2021): http://hdl.handle.net/10362/142757.
    https://doi.org/10.22055/jacm.2021.37617.3051
  43. Machado, Bianca Neves; Oleinik, Phelype Haron; Kirinus, Eduardo De Paula; Santos, Elizaldo Domingues Dos; Rocha, Luiz Alberto Oliveira; Gomes, Mateus Das Neves; Conde, José Manuel Paixão; Isoldi, Liércio André. "WaveMIMO Methodology". (2021): http://hdl.handle.net/10362/142757.
    https://doi.org/10.22055/jacm.2021.37617.3051
  44. Machado, Bianca Neves; Oleinik, Phelype Haron; Kirinus, Eduardo De Paula; Santos, Elizaldo Domingues Dos; Rocha, Luiz Alberto Oliveira; Gomes, Mateus Das Neves; Conde, José Manuel Paixão; Isoldi, Liércio André. "WaveMIMO Methodology". (2021): http://hdl.handle.net/10362/142757.
    https://doi.org/10.22055/jacm.2021.37617.3051
  45. Kauê L. Martins; Vinícius T. Pinto; Cristiano Fragassa; Mauro V. Real; Luiz A. O. Rocha; Liércio A. Isoldi; Elizaldo D. dos Santos. "A Simplified Numerical Method for the Design and Analysis of FPSO Platform Brackets Subjected to Operational Conditions". Journal of Marine Science and Engineering 8 11 (2020): 929-929. https://doi.org/10.3390/jmse8110929.
    10.3390/jmse8110929
  46. Marcelo Langhinrichs Cunha; Emanuel da Silva Diaz Estrada; João Paulo Silva Lima; Grégori da Silva Troina; Elizaldo Domingues dos Santos; Liércio André Isoldi. "Constructal design associated with genetic algorithm to minimize the maximum deflection of thin stiffened steel plates". Heat Transfer (2020): https://doi.org/10.1002/htj.21711.
    10.1002/htj.21711
  47. Milton Cesar Bastos Portela Junior; Vinícius Torres Pinto; Luiz Alberto Oliveira Rocha; Elizaldo Domingues Dos Santos; Liércio André Isoldi. "ANALYSIS THROUGH CONSTRUCTAL DESIGN OF THE INFLUENCE OF SPACING BETWEEN STIFFENERS IN THE DEFLECTION OF PLATES". Revista Mundi Engenharia, Tecnologia e Gestão (ISSN: 2525-4782) 5 5 (2020): https://doi.org/10.21575/25254782rmetg2020vol5n51354.
    10.21575/25254782rmetg2020vol5n51354
  48. Glauciléia M. C. Magalhães; Cristiano Fragassa; Rafael de L. Lemos; Liércio A. Isoldi; Sandro C. Amico; Luiz A. O. Rocha; Jeferson A. Souza; Elizaldo D. dos Santos. "Numerical Analysis of the Influence of Empty Channels Design on Performance of Resin Flow in a Porous Plate". Applied Sciences 10 11 (2020): 4054-4054. https://doi.org/10.3390/app10114054.
    10.3390/app10114054
  49. Hermes, V.F.; Ramalho, J.V.A.; Rocha, L.A.O.; dos Santos, E.D.; Marques, W.C.; Costi, J.; Rodrigues, M.K.; Isoldi, L.A.. "Further realistic annual simulations of earth-air heat exchangers installations in a coastal city". Sustainable Energy Technologies and Assessments 37 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85076300964&partnerID=MN8TOARS.
    10.1016/j.seta.2019.100603
  50. Teixeira, F.B.; Altnetter, M.V.; Lorenzini, G.; Rodriguez, B.D.A.; Rocha, L.A.O.; Isoldi, L.A.; dos Santos, E.D.. "Geometrical Evaluation of a Channel with Alternated Mounted Blocks under Mixed Convection Laminar Flows Using Constructal Design". Journal of Engineering Thermophysics 29 1 (2020): 92-113. http://www.scopus.com/inward/record.url?eid=2-s2.0-85081062080&partnerID=MN8TOARS.
    10.1134/S1810232820010087
  51. Amaral, R.R.; Troina, G.S.; Fragassa, C.; Pavlovic, A.; Cunha, M.L.; Rocha, L.A.O.; dos Santos, E.D.; Isoldi, L.A.. "Constructal design method dealing with stiffened plates and symmetry boundaries". Theoretical and Applied Mechanics Letters 10 5 (2020): 366-376. http://www.scopus.com/inward/record.url?eid=2-s2.0-85091629083&partnerID=MN8TOARS.
    10.1016/j.taml.2020.01.042
  52. Lima, J.P.S.; Cunha, M.L.; dos Santos, E.D.; Rocha, L.A.O.; Real, M.D.V.; Isoldi, L.A.. "Constructal Design for the ultimate buckling stress improvement of stiffened plates submitted to uniaxial compressive load". Engineering Structures 203 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85074666550&partnerID=MN8TOARS.
    10.1016/j.engstruct.2019.109883
  53. Troina, G.; Cunha, M.; Pinto, V.; Rocha, L.; Santos, E.; Fragassa, C.; Isoldi, L.. "Computational modeling and constructal design theory applied to the geometric optimization of thin steel plates with stiffeners subjected to uniform transverse load". Metals 10 2 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85079126911&partnerID=MN8TOARS.
    10.3390/met10020220
  54. Pedroti, V.A.; de Escobar, C.C.; dos Santos, E.D.; Souza, J.A.. "Thermal analysis of tubular arrangements submitted to external flow using constructal theory". International Communications in Heat and Mass Transfer 111 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85077311158&partnerID=MN8TOARS.
    10.1016/j.icheatmasstransfer.2019.104458
  55. Rodrigues, P.M.; Biserni, C.; de Escobar, C.C.; Rocha, L.A.O.; Isoldi, L.A.; dos Santos, E.D.. "Geometric optimization of a lid-driven cavity with two rectangular intrusions under mixed convection heat transfer: A numerical investigation motivated by constructal design". International Communications in Heat and Mass Transfer 117 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85088122283&partnerID=MN8TOARS.
    10.1016/j.icheatmasstransfer.2020.104759
  56. Victoria, L.C.; Hermes, V.D.F.; Vaz, J.; Costi, J.; Marques, W.C.; Rocha, L.A.O.; Santos, E.D.D.; et al. "Methodology Allying Standard Penetration Test and Era-Interim Data Set for Numerical Simulations of Earth-Air Heat Exchangers". Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 76 2 (2020): 43-64. http://www.scopus.com/inward/record.url?eid=2-s2.0-85097153558&partnerID=MN8TOARS.
    10.37934/arfmts.76.2.4364
  57. Letzow, M.; Lorenzini, G.; Barbosa, D.V.E.; Hübner, R.G.; Rocha, L.A.O.; das Neves Gomes, M.; AndréIsoldi, L.; dos Santos, E.D.. "Numerical analysis of the influence of geometry on a large scale onshore oscillating water column device with associated seabed ramp". International Journal of Design and Nature and Ecodynamics 15 6 (2020): 873-884. http://www.scopus.com/inward/record.url?eid=2-s2.0-85098637934&partnerID=MN8TOARS.
    10.18280/ijdne.150613
  58. Estrada, E.S.D.; Barreto, E.X.; Isoldi, L.A.; dos Santos, E.D.; Lorente, S.; Rocha, L.A.O.. "Constructal design of tree shaped cavities inserted into a cylindrical body with heat generation". International Journal of Thermal Sciences 152 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85080026444&partnerID=MN8TOARS.
    10.1016/j.ijthermalsci.2020.106342
  59. Fragassa, C.; Babic, M.; Domingues Dos Santos, E.. "Machine learning approaches to predict the hardness of cast iron". Tribology in Industry 42 1 (2020): 1-9. http://www.scopus.com/inward/record.url?eid=2-s2.0-85082115714&partnerID=MN8TOARS.
    10.24874/ti.2020.42.01.01
  60. Pinto, V.T.; Rocha, L.A.O.; Fragassa, C.; dos Santos, E.D.; Isoldi, L.A.. "Multiobjective Geometric Analysis of Stiffened Plates under Bending through Constructal Design Method". Journal of Applied and Computational Mechanics 6 Special Is (2020): 1438-1449. http://www.scopus.com/inward/record.url?eid=2-s2.0-85098505208&partnerID=MN8TOARS.
    10.22055/jacm.2020.35248.2608
  61. Ruth S. Brum; Jairo V.A. Ramalho; Michel K. Rodrigues; Luiz A.O. Rocha; Liércio A. Isoldi; Elizaldo D. Dos Santos. "Design evaluation of Earth-Air Heat Exchangers with multiple ducts". Renewable Energy 135 (2019): 1371-1385. https://doi.org/10.1016/j.renene.2018.09.063.
    10.1016/j.renene.2018.09.063
  62. "Geometric Evaluation of Stiffened Steel Plates Subjected to Transverse Loading for Naval and Offshore Applications". Journal of Marine Science and Engineering (2019): http://dx.doi.org/10.3390/jmse7010007.
    10.3390/jmse7010007
  63. Youssef El Halal; Crístofer Hood Marques; Luiz Alberto Oliveira Rocha; Liércio A. Isoldi; Rafael de L. Lemos; Cristiano Fragassa; Elizaldo dos Santos. "Numerical Study of Turbulent Air and Water Flows in a Nozzle Based on the Coanda Effect". Journal of Marine Science and Engineering (2019): http://www.mdpi.com/2077-1312/7/2/21.
    10.3390/jmse7020021
  64. "Analysis of the Geometric Constraints Employed in Constructal Design for Oscillating Water Column Devices Submitted to the Wave Spectrum through a Numerical Approach". Defect and Diffusion Forum (2019): http://dx.doi.org/10.4028/www.scientific.net/ddf.390.193.
    10.4028/www.scientific.net/ddf.390.193
  65. De Oliveira, D.M.; Isoldi, L.A.; Dos Santos, E.D.; Rocha, L.A.O.; Das Neves Gomes, M.. "Ocean wave energy as a possible power source for the brazilian energy matrix". Defect and Diffusion Forum 396 (2019): 70-78. http://www.scopus.com/inward/record.url?eid=2-s2.0-85071945782&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.396.70
  66. Razera, A.L.; Quezada, L.A.; Fagundes, T.M.; Isoldi, L.A.; dos Santos, E.D.; Biserni, C.; Rocha, L.A.O.. "Fluid flow and heat transfer maximization of elliptic cross- section tubes exposed to forced convection: A numerical approach motivated by Bejan's theory". International Communications in Heat and Mass Transfer 109 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85074005973&partnerID=MN8TOARS.
    10.1016/j.icheatmasstransfer.2019.104366
  67. Kauê Louro Martins; Vinícius Torres Pinto; Luiz Alberto Oliveira Rocha; Elizaldo Domingues dos Santos; Liércio André Isoldi. "Numerical evaluation of the mechanical behavior of an FPSO mooring system fairleads foundations due to maximum environmental loads". Research on Engineering Structures and Materials (2019): https://doi.org/10.17515/resm2019.119ms1502.
    10.17515/resm2019.119ms1502
  68. Marcelo Langhinrichs Cunha; Emanuel da Silva Diaz Estrada; Grégori da Silva Troina; Elizaldo Domingues dos Santos; Luiz Alberto Oliveira Rocha; Liércio André Isoldi. "Verification of a genetic algorithm for the optimization of stiffened plates through the constructal design method". Research on Engineering Structures and Materials (2019): https://doi.org/10.17515/resm2019.123ms0307.
    10.17515/resm2019.123ms0307
  69. Barbosa, D.V.E.; Santos, A.L.G.; dos Santos, E.D.; Souza, J.A.. "Overtopping device numerical study: Openfoam solution verification and evaluation of curved ramps performances". International Journal of Heat and Mass Transfer 131 (2019): 411-423. http://www.scopus.com/inward/record.url?eid=2-s2.0-85056879730&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2018.11.071
  70. Rodrigues, P.M.; De Escobar, C.C.; Rocha, L.A.O.; Isoldi, L.A.; Dos Santos, E.D.. "Geometry evaluation of heat transfer by mixed convention in driven cavities with two inserted fins". Defect and Diffusion Forum 396 (2019): 164-173. http://www.scopus.com/inward/record.url?eid=2-s2.0-85071915627&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.396.164
  71. Seibt, F.M.; de Camargo, F.V.; dos Santos, E.D.; Gomes, M.N.; Rocha, L.A.O.; Isoldi, L.A.; Fragassa, C.. "Numerical evaluation on the efficiency of the submerged horizontal plate type wave energy converter". FME Transactions 47 3 (2019): 543-551. http://www.scopus.com/inward/record.url?eid=2-s2.0-85066100098&partnerID=MN8TOARS.
    10.5937/fmet1903543S
  72. Rodrigo Reis Amaral; Grégori da Silva Troina; Carolina Martins Nogueira; Nogueira Cunha; Luiz Alberto Oliveira Rocha; Elizaldo Domingues dos Santos; Liércio André Isoldi. "Computational Modeling and Constructal Design Method Applied to the Geometric Evaluation of Stiffened Thin Steel Plates Considering Symmetry Boundary Condition". Research on Engineering Structures and Materials (2019): https://doi.org/10.17515/resm2019.112ms0204.
    10.17515/resm2019.112ms0204
  73. da Silva, C.C.C.; Helbig, D.; Cunha, M.L.; dos Santos, E.D.; Rocha, L.A.O.; Real, M.V.; Isoldi, L.A.. "Numerical buckling analysis of thin steel plates with centered hexagonal perforation through constructal design method". Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 8 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85068766458&partnerID=MN8TOARS.
    10.1007/s40430-019-1815-7
  74. Gonzales, G.V.; Isoldi, L.A.; Rocha, L.A.O.; Da Silva Neto, A.J.; Dos Santos, E.D.. "Evaluation of a differential evolution/constructal design algorithm for geometrical optimization of double t-shaped cavity intruded into a heat generating wall". Defect and Diffusion Forum 396 (2019): 145-154. http://www.scopus.com/inward/record.url?eid=2-s2.0-85071929804&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.396.145
  75. Fagundes, T.M.; Lorenzini, G.; Estrada, E.S.D.; Isoldi, L.A.; dos Santos, E.D.; Rocha, L.A.O.; da Silva Neto, A.J.. "Constructal Design of Conductive Asymmetric Tri-Forked Pathways". Journal of Engineering Thermophysics 28 1 (2019): 26-42. http://www.scopus.com/inward/record.url?eid=2-s2.0-85064909195&partnerID=MN8TOARS.
    10.1134/S181023281901003X
  76. Fragassa, C.; dos Santos, E.D.; de Camargo, F.V.. "Use of engineering mathematics for ship design". Journal of Marine Science and Engineering 7 10 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85074483261&partnerID=MN8TOARS.
    10.3390/jmse7100370
  77. Lima, Y.T.B.; Gomes, M.N.; Cardozo, C.F.; Isoldi, L.A.; Santos, E.D.; Rocha, L.A.O.. "Analysis of geometric variation of three degrees of freedom through the constructal design method for a oscillating water column device with double hidropneumatic chamber". Defect and Diffusion Forum 396 (2019): 22-31. http://www.scopus.com/inward/record.url?eid=2-s2.0-85071911703&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.396.22
  78. Del Aghenese, A.P.; Heinemann, E.M.; De Avila Barreto, G.; Teixeira, F.B.; Isoldi, L.A.; Rocha, L.A.O.; Dos Santos, E.D.. "Geometrical evaluation of a pair of elliptical tubes subjected to a flow with forced convection heat transfer". Defect and Diffusion Forum 396 (2019): 155-163. http://www.scopus.com/inward/record.url?eid=2-s2.0-85071925251&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.396.155
  79. P. A. Avendan~o; J. A. Souza; D. F. Adamatti; E. D. dos Santos. "GEOMETRIC OPTIMIZATION OF “+”-SHAPED CAVITY USING CONSTRUCTAL THEORY". Revista de Engenharia Térmica 16 1 (2018): 75-75. https://doi.org/10.5380%2Freterm.v16i1.62195.
    10.5380/reterm.v16i1.62195
  80. V. A. Pedrotti; J. A. Souza; E. D. Dos Santos; L. A. Isoldi. "CONSTRUCTAL DESIGN OF A TUBULAR ARRAY SUBJECTED TO FORCED CONVECTION". Revista de Engenharia Térmica 14 1 (2018): 16-16. https://doi.org/10.5380%2Freterm.v14i1.62108.
    10.5380/reterm.v14i1.62108
  81. F. B. Link; L. A. O. Rocha; E. D. Dos Santos; L. A. Isoldi. "CONSTRUCTAL DESIGN OF A X-SHAPED CAVITY COOLED BY CONVECTION". Revista de Engenharia Térmica 13 1 (2018): 54-54. https://doi.org/10.5380%2Freterm.v13i1.62070.
    10.5380/reterm.v13i1.62070
  82. C. H. Marques; L. A. Isoldi; E. D. Dos Santos; L. A. O. Rocha. "CONSTRUCTAL DESIGN OF A VORTEX TUBE FOR SEVERAL INLET STAGNATION PRESSURES". Revista de Engenharia Térmica 11 1-2 (2018): 85-85. https://doi.org/10.5380%2Freterm.v11i1-2.62005.
    10.5380/reterm.v11i1-2.62005
  83. L. A. O. Rocha; G. C. Montanari; E. D. Dos Santos; A. Da S. Rocha. "CONSTRUCTAL DESIGN APPLIED TO THE STUDY OF CAVITIES INTO A SOLID CONDUCTING WALL". Revista de Engenharia Térmica 6 1 (2018): 41-41. https://doi.org/10.5380%2Freterm.v6i1.61816.
    10.5380/reterm.v6i1.61816
  84. Júlio César Burlamaqui Vianna; Emanuel da Silva Diaz Estrada; Liércio André Isoldi; Elizaldo Domingues dos Santos; Jeferson Avila Souza. "A new Constructal Theory based algorithm applied to thermal problems". International Journal of Thermal Sciences 126 (2018): 118-124. https://doi.org/10.1016/j.ijthermalsci.2017.12.023.
    10.1016/j.ijthermalsci.2017.12.023
  85. J.C. Martins; M.M. Goulart; M. das N. Gomes; J.A. Souza; L.A.O. Rocha; L.A. Isoldi; E.D. dos Santos. "Geometric evaluation of the main operational principle of an overtopping wave energy converter by means of Constructal Design". Renewable Energy 118 (2018): 727-741. https://doi.org/10.1016/j.renene.2017.11.061.
    10.1016/j.renene.2017.11.061
  86. Roberta Da Silva Michaello; Jorge Renato Soares Paes; Liércio André Isoldi; Rafael Gonzalez Bastos; Elizaldo Domingues Dos Santos; Luiz Alberto Oliveira Rocha. "PERFIS PERFURADOS SUBMETIDOS À FLAMBAGEM TÉRMICA E MECÂNICA". Exatas & Engenharia 8 20 (2018): https://doi.org/10.25242%2F885x82020181311.
    10.25242/885x82020181311
  87. Rafael De Lima Lemos; Luiz Alberto Oliveira Rocha; Rodrigo Spotorno Vieria; Martim Dos Santos Pereira; Liércio André Isoldi; Elizaldo Domingues Dos Santos. "SIMULAÇÃO DE ESCOAMENTO COM EFEITO COANDA SOBRE PERFIS HIDRODINÂMICOS". Exatas & Engenharia 8 20 (2018): https://doi.org/10.25242%2F885x82020181310.
    10.25242/885x82020181310
  88. Marcelo Cunha; Federal University of Rio Grande; Grégori da Silva Troina; Elizaldo Domingues dos Santos; Luiz Alberto Rocha; Liércio André Isoldi; University of Vale do Rio dos Sinos. "Computational modeling and Constructal Design method applied to the geometric optimization of stiffened steel plates subjected to uniform transverse load". Research on Engineering Structures and Materials (2018): https://doi.org/10.17515%2Fresm2017.18st1118.
    10.17515/resm2017.18st1118
  89. Feijó, B.C.; Lorenzini, G.; Isoldi, L.A.; Rocha, L.A.O.; Goulart, J.N.V.; dos Santos, E.D.. "Constructal design of forced convective flows in channels with two alternated rectangular heated bodies". International Journal of Heat and Mass Transfer 125 (2018): 710-721. http://www.scopus.com/inward/record.url?eid=2-s2.0-85046344807&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2018.04.086
  90. Rodrigues, M.K.; Coswig, F.S.; Camargo, K.R.; Isoldi, L.A.; Brum, R.S.; Ramalho, J.V.A.; Vaz, J.; Rocha, L.A.O.; dos Santos, E.D.. "Thermal performance simulations of Earth-Air Heat Exchangers for different soils of a coastal city using in-situ data". Sustainable Energy Technologies and Assessments 30 (2018): 224-229. http://www.scopus.com/inward/record.url?eid=2-s2.0-85055156463&partnerID=MN8TOARS.
    10.1016/j.seta.2018.10.003
  91. Razera, A.L.; da Fonseca, R.J.C.; Isoldi, L.A.; dos Santos, E.D.; Rocha, L.A.O.; Biserni, C.. "Constructal design of a semi-elliptical fin inserted in a lid-driven square cavity with mixed convection". International Journal of Heat and Mass Transfer 126 (2018): 81-94. http://www.scopus.com/inward/record.url?eid=2-s2.0-85048067516&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2018.05.157
  92. das N. Gomes, M.; Lorenzini, G.; Rocha, L.A.O.; dos Santos, E.D.; Isoldi, L.A.. "Constructal Design Applied to the Geometric Evaluation of an Oscillating Water Column Wave Energy Converter Considering Different Real Scale Wave Periods". Journal of Engineering Thermophysics 27 2 (2018): 173-190. http://www.scopus.com/inward/record.url?eid=2-s2.0-85047388271&partnerID=MN8TOARS.
    10.1134/S1810232818020042
  93. Lima, J.P.S.; Rocha, L.A.O.; Dos Santos, E.D.; De Vasconcellos Real, M.; Isoldi, L.A.. "Constructal design and numerical modeling applied to stiffened steel plates submitted to elasto-plastic buckling". Proceedings of the Romanian Academy Series A - Mathematics Physics Technical Sciences Information Science 19 (2018): 195-200. http://www.scopus.com/inward/record.url?eid=2-s2.0-85049974271&partnerID=MN8TOARS.
  94. Teixeira, F.B.; Lorenzini, G.; Errera, M.R.; Rocha, L.A.O.; Isoldi, L.A.; dos Santos, E.D.. "Constructal Design of triangular arrangements of square bluff bodies under forced convective turbulent flows". International Journal of Heat and Mass Transfer 126 (2018): 521-535. http://www.scopus.com/inward/record.url?eid=2-s2.0-85047084861&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2018.04.134
  95. Razera, A.L.; Errera, M.R.; Dos Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.. "Constructal network of scientific publications, co-authorship and citations". Proceedings of the Romanian Academy Series A - Mathematics Physics Technical Sciences Information Science 19 (2018): 105-110. http://www.scopus.com/inward/record.url?eid=2-s2.0-85049942068&partnerID=MN8TOARS.
  96. Roberta Suero; Nielton de Souza Monteiro; Paulo Ricardo Ferreira de Miranda; Matheus José de Deus; Elizaldo Domingues dos Santos; Liércio André Isoldi; Luiz Alberto Oliveira Rocha; Mateus das Neves Gomes. "Uma análise do emprego do Método Multigrid Algébrico na simulação numérica da propagação de ondas oceânicas". Revista Cereus 10 4 (2018): 211-225. https://doi.org/10.18605%2F2175-7275%2Fcereus.v10n4p211-225.
    10.18605/2175-7275/cereus.v10n4p211-225
  97. Marcelo Moraes Goular; Ana Paula Gomes; Luiz Alberto Oliveira Rocha; Elizaldo Domingues dos Santos; Liércio André Isoldi; Jaifer Corrêa Martins; Mateus das Neves Gomes. "Verificação e Validação de um Modelo Numérico para Abordagem do Escoamento em um Canal de Ondas". Revista Cereus 10 4 (2018): 226-239. https://doi.org/10.18605%2F2175-7275%2Fcereus.v10n4p226-239.
    10.18605/2175-7275/cereus.v10n4p226-239
  98. Ramalho, J.V.A.; Brum, R.S.; Rocha, L.A.O.; Isoldi, L.A.; dos Santos, E.D.; Sulzbacher, M.. "Fitting new constructal models for the thermal potential of earth-air heat exchangers,Determinando novos modelos constructais para o potencial térmico de trocadores de calor solo-ar". Acta Scientiarum - Technology 40 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85038436846&partnerID=MN8TOARS.
    10.4025/actascitechnol.v40i1.30897
  99. Hermany, L.; Lorenzini, G.; Klein, R.J.; Zinani, F.F.; dos Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.. "Constructal design applied to elliptic tubes in convective heat transfer cross-flow of viscoplastic fluids". International Journal of Heat and Mass Transfer 116 (2018): 1054-1063. http://www.scopus.com/inward/record.url?eid=2-s2.0-85030309464&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2017.09.108
  100. Carolline Aryene Schnich; Glauciléia Maria Cardoso Magalhães; Sandro Campos Amico; Luiz Alberto Oliveira Rocha; Liércio André Isoldi; Jeferson Avila Souza; Elizaldo Domingues Dos Santos. "ESTUDO NUMÉRICO DE UM PROCESSO DE INFUSÃO DE RESINA PARA DIFERENTES CONFIGURAÇÕES DE UM CANAL VAZIO EM FORMA DE Y". Revista Mundi Engenharia, Tecnologia e Gestão (ISSN: 2525-4782) (2017): https://doi.org/10.21575/25254782rmetg2017vol2n1331.
    10.21575/25254782rmetg2017vol2n1331
  101. Vinicius Paranhos Vianna; Flávio Medeiros Seibt; Mateus Das Neves Gomes; Luiz Alberto Oliveira Rocha; Elizaldo Domingues Dos Santos; Liércio André Isoldi. "MODELAGEM COMPUTACIONAL DO PRINCÍPIO DE FUNCIONAMENTO DE UM CONVERSOR TIPO PLACA HORIZONTAL SUBMERSA EM ESCALA REAL". Revista Mundi Engenharia, Tecnologia e Gestão (ISSN: 2525-4782) 2 1 (2017): https://doi.org/10.21575%2F25254782rmetg2017vol2n1363.
    10.21575/25254782rmetg2017vol2n1363
  102. Rogério Almeida Gouvea; Elizaldo Domingues Dos Santos; Jeferson Avila Souza. "Otimização construtal de uma cavidade multi-bifurcada para dissipação de calor". Scientia Plena 13 4 (2017): https://doi.org/10.14808%2Fsci.plena.2017.049914.
    10.14808/sci.plena.2017.049914
  103. Maicon Vinicius Altnetter; Martim Dos Santos Pereira; Liércio André Isoldi; Luiz Alberto De Oliveira Rocha; Bárbara Denicol Do Amaral Rodriguez; Elizaldo Domingues Dos Santos. "Análise geométrica de um canal aletado com transferência de calor por convecção mista através do Design Construtal". Scientia Plena 13 4 (2017): https://doi.org/10.14808%2Fsci.plena.2017.049903.
    10.14808/sci.plena.2017.049903
  104. Michel Kepes Rodrigues; Henrique Sica Gonçalves; Ruth Da Silva Brum; Joaquim Vaz; Luiz Alberto Oliveira Rocha; Jairo Valões de Alencar Ramalho; Elizaldo Domingues dos Santos; Liércio André Isoldi. "Usando séries temporais obtidas experimentalmente como condições de contorno para a simulação numérica de trocadores de calor solo-ar". Scientia Plena 13 4 (2017): https://doi.org/10.14808%2Fsci.plena.2017.049912.
    10.14808/sci.plena.2017.049912
  105. João Paulo Silva Lima; André Pereira Ramos; Fernanda Santana Carvalho; Luis Alberto Oliveira Rocha; Elizaldo Domingues Dos Santos; Mauro De Vasconcellos Real; Liércio André Isoldi. "Verificação de um modelo computacional para a flambagem elástica de placas ortotrópicas". Scientia Plena 13 4 (2017): https://doi.org/10.14808%2Fsci.plena.2017.049916.
    10.14808/sci.plena.2017.049916
  106. Yuri Theodoro Barbosa de Lima; Luiz Alberto Oliveira Rocha; Mateus Das Neves Gomes; Elizaldo Domingues dos Santos; Liércio André Isoldi. "Análise numérica e geométrica com design construtal da região de transição para um dispositivo do tipo coluna de água oscilante (CAO)". Scientia Plena 13 4 (2017): https://doi.org/10.14808%2Fsci.plena.2017.049906.
    10.14808/sci.plena.2017.049906
  107. Sersana Sabedra De Oliveira; Phelype Haron Oleinik; Mateus Das Neves Gomes; Elizaldo Domingues Dos Santos; Jeferson Avila Souza; Luiz Alberto Oliveira Rocha; Wilian Correa Marques; Liércio André Isoldi. "Modelagem computacional de um conversor de energia das ondas em energia elétrica do tipo Coluna de Água Oscilante (CAO) considerando dados de estado do mar". Scientia Plena 13 4 (2017): https://doi.org/10.14808%2Fsci.plena.2017.049915.
    10.14808/sci.plena.2017.049915
  108. Thiago Da Silveira; João Paulo Silva Lima; Mauro De Vasconcellos Real; Luiz Alberto Oliveira Rocha; Elizaldo Domingues Dos Santos; Liércio André Isoldi. "Verificação de um modelo computacional baseado no método de elementos finitos aplicado à flambagem biaxial de placas delgadas laminadas". Scientia Plena 13 4 (2017): https://doi.org/10.14808%2Fsci.plena.2017.049918.
    10.14808/sci.plena.2017.049918
  109. Rodrigo Spotorno Vieira; Luiz Alberto Oliveira Rocha; Liércio André Isoldi; Elizaldo Domingues Dos Santos. "NUMERICAL STUDY OF TWO VERTICAL AXIS WIND TURBINES DARRIEU TYPE LINED UP IN FUNCTION OF POWER COEFFICIENT1". Revista Brasileira de Energias Renováveis 6 3 (2017): https://doi.org/10.5380%2Frber.v6i3.52981.
    10.5380/rber.v6i3.52981
  110. Régis Lucas Timm; Phelype Haron Oleinik; Eduardo De Paula Kirinus; Wiliam Correa Masques; Elizaldo Domingues Dos Santos. "ANÁLISE E APLICAÇÃO DO DESIGN CONSTRUTAL PARA AVALIAÇÃO GEOMÉTRICA DE SÍTIOS DE CONVERSÃO DE ENERGIA NA PLATAFORMA CONTINENTAL SUL DO BRASIL". Revista Brasileira de Energias Renováveis 6 3 (2017): https://doi.org/10.5380%2Frber.v6i3.52982.
    10.5380/rber.v6i3.52982
  111. Geovane Nascimento De Oliveira; Luiz Alberto Oliveira Rocha; Adriane Prisco Petry; Liércio André Isoldi; Rodrigo Spotorno Vieira; Elizaldo Domingues Dos Santos. "INFLUÊNCIA DO REFINAMENTO DA MALHA NOS COEFICIENTES DE ARRASTO, SUSTENTAÇÃO E TORQUE ESTÁTICO DE UMA TURBINA SAVONIUS DE ÚNICO ESTÁGIO". Revista Brasileira de Energias Renováveis 6 3 (2017): https://doi.org/10.5380%2Frber.v6i3.52991.
    10.5380/rber.v6i3.52991
  112. Yuri Theodoro Barbosa De Lima; Luiz Alberto Oliveira Rocha; Mateus Das Neves Gomes; Elizaldo Domingues Dos Santos. "APLICAÇÃO DO MÉTODO DESIGN CONSTRUTAL NA AVALIAÇÃO NUMÉRICA DA POTÊNCIA HIDROPNEUMÁTICA DE UM DISPOSITIVO CONVERSOR DE ENERGIA DAS ONDAS DO MAR DO TIPO COLUNA DE ÁGUA OSCILANTE COM REGIÃO DE TRANSIÇÃO TRAPEZOIDAL". Revista Brasileira de Energias Renováveis 6 3 (2017): https://doi.org/10.5380%2Frber.v6i3.52983.
    10.5380/rber.v6i3.52983
  113. Max Letzow; Felipe Vilela Levien; Rafael Dos Passos Pons; Mateus Das Neves Gomes; Jeferson Avila Souza; Luiz Alberto Oliveira Rocha; Liércio André Isoldi; Elizaldo Domingues Dos Santos. "AVALIAÇÃO GEOMÉTRICA DA CÂMARA DE UM DISPOSITIVO DE CONVERSÃO DE ENERGIA DAS ONDAS DO TIPO OWC PARA DIFERENTES COMPRIMENTOS DA BORDA FRONTAL". Revista Brasileira de Energias Renováveis 6 3 (2017): https://doi.org/10.5380%2Frber.v6i3.52992.
    10.5380/rber.v6i3.52992
  114. Jaifer Corrêa Martins; Dante Vinícius Eloy Barbosa; Marcelo Moraes Goulart; Antônio Rickes Viegas; Anderson Sorrivas Furich; Luiz Alberto Oliveira Rocha; Jeferson Avila Souza; Liércio Adré Isoldi; Elizaldo Domingues Dos Santos. "ESTUDO DOS PROCEDIMENTOS NUMÉRICOS PARA SIMULAÇÃO DE UM DISPOSITIVO DE GALGAMENTO". Revista Brasileira de Energias Renováveis 6 3 (2017): https://doi.org/10.5380%2Frber.v6i3.52990.
    10.5380/rber.v6i3.52990
  115. Mateus Das Neves Gomes; Leandro Ferres Cassel; Elizaldo Domingues Dos Santos; Liércio André Isoldi; Luiz Alberto Oliveira Rocha. "ANÁLISE GEOMÉTRICA DE DOIS GRAUS DE LIBERDADE DE UM DISPOSITIVO CONVERSOR DE ENERGIA DAS ONDAS DO TIPO COLUNA DE ÁGUA OSCILANTE NA FORMA TRAPEZOIDAL". Revista Brasileira de Energias Renováveis 6 3 (2017): https://doi.org/10.5380%2Frber.v6i3.53000.
    10.5380/rber.v6i3.53000
  116. Bianca Neves Machado; Elizaldo Domingues Dos Santos; Liércio André Isoldi; Mateus Das Neves Gomes; Luiz Alberto Oliveira Rocha. "ANÁLISE NUMÉRICA DA GEOMETRIA DA RAMPA DE UM DISPOSITIVO DE GALGAMENTO ONSHORE EM ESCALA REAL APLICANDO O DESIGN CONSTRUTAL". Revista Brasileira de Energias Renováveis 6 3 (2017): https://doi.org/10.5380%2Frber.v6i3.52999.
    10.5380/rber.v6i3.52999
  117. Flávio Medeiros Seibt; Luiz Alberto Oliveira Rocha; Elizaldo Domingues Dos Santos; Liércio André Isoldi. "ESTUDO NUMÉRICO DO EFEITO DA VARIAÇÃO CONJUNTA DO COMPRIMENTO E DA ALTURA RELATIVA DE UM CONVERSOR DE ENERGIA DAS ONDAS TIPO PLACA HORIZONTAL SUBMERSA". Revista Brasileira de Energias Renováveis 6 3 (2017): https://doi.org/10.5380%2Frber.v6i3.53001.
    10.5380/rber.v6i3.53001
  118. Michel Kepes Rodrigues; Felipe Silva Coswig; Karina Retzlaff Camargo; Ruth Silva Brum; Luiz Alberto Oliveira Rocha; Joaquim Vaz; Elizaldo Domingues Dos Santos; Liércio Adré Isoldi. "ESTUDO DO POTENCIAL TÉRMICO DE TROCADOR DE CALOR SOLO-AR EM DOIS TIPOS DE SOLOS NO MUNICÍPIO DE RIO GRANDE (RS)". Revista Brasileira de Energias Renováveis 6 3 (2017): https://doi.org/10.5380%2Frber.v6i3.52994.
    10.5380/rber.v6i3.52994
  119. Rodrigo Spotorno Vieira; Muriel Laborde Rajão; Liércio André Isoldi; Luiz Alberto Oliveira Rocha; Elizaldo Domingues Dos Santos. "ESTUDO NUMÉRICO DO ESCOAMENTO TURBULENTO EM CHAMINÉ SOLAR PARA VENTILAÇÃO DE AMBIENTES CONSTRUIDOS". Revista Brasileira de Energias Renováveis 6 3 (2017): https://doi.org/10.5380%2Frber.v6i3.52998.
    10.5380/rber.v6i3.52998
  120. Flávio Medeiros Seibt; Elizaldo Domingues Dos Santos; Liércio André Isoldi; Luiz Alberto Oliveira Rocha. "MODELAGEM COMPUTACIONAL DO CONVERSOR DE ENERGIA DAS ONDAS TIPO PLACA HORIZONTAL SUBMERSA EM ESCALA REAL E ANÁLISE DE SIMILARIDADE COM MODELO EM ESCALA DE LABORATÓRIO". Revista Brasileira de Energias Renováveis 6 3 (2017): https://doi.org/10.5380%2Frber.v6i3.52989.
    10.5380/rber.v6i3.52989
  121. Jaifer Corrêa Martins; Marcelo Moras Goulart; Mateus Das Neves Gomes; Jeferson Avila Souza; Luiz Alberto Oliveira Rocha; Liércio André Isoldi; Elizaldo Domingues Dos Santos. "ANÁLISE NUMÉRICA DE UM DISPOSITIVO DE GALGAMENTO ONSHORE COMPARANDO A INFLUÊNCIA DE UMA ONDA MONOCROMÁTICA E DE UM ESPECTRO DE ONDAS". Revista Brasileira de Energias Renováveis 6 3 (2017): https://doi.org/10.5380%2Frber.v6i3.52993.
    10.5380/rber.v6i3.52993
  122. Fabiane Valente Härter; Jeferson Avila Souza; Liércio André Isoldi; Elizaldo Domingues dos Santos; Sandro Campos Amico. "Transverse permeability determination and influence in resin flow through an orthotropic medium in the RTM process". Matéria (Rio de Janeiro) 22 2 (2017): https://doi.org/10.1590%2Fs1517-707620170002.0167.
    10.1590/s1517-707620170002.0167
  123. Vieira, R.S.; Petry, A.P.; Rocha, L.A.O.; Isoldi, L.A.; dos Santos, E.D.. "Numerical evaluation of a solar chimney geometry for different ground temperatures by means of constructal design". Renewable Energy 109 (2017): 222-234. http://www.scopus.com/inward/record.url?eid=2-s2.0-85015431689&partnerID=MN8TOARS.
    10.1016/j.renene.2017.03.007
  124. Brum, R.S.; Rodrigues, M.K.; Ramalho, J.V.A.; Rocha, L.A.O.; Isoldi, L.A.; Dos Santos, E.D.. "On the design of two EAHE assemblies with four ducts". Defect and Diffusion Forum 372 (2017): 31-39. http://www.scopus.com/inward/record.url?eid=2-s2.0-85014918147&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.372.31
  125. de Melo, T.; Goulart, J.N.V.; Anflor, C.T.M.; dos Santos, E.. "Experimental investigation of the velocity time-traces of the turbulent flow in a rectangular channel with a lateral slot". European Journal of Mechanics, B/Fluids 62 (2017): 130-138. http://www.scopus.com/inward/record.url?eid=2-s2.0-85007495713&partnerID=MN8TOARS.
    10.1016/j.euromechflu.2016.12.003
  126. de Lima Lemos, R.; Spotorno, R.; André, L.; Rocha, L.A.O.; dos Santos Pereira, M.; dos Santos, E.D.. "Numerical analysis of a turbulent flow with coanda effect in hydrodynamics profiles". FME Transactions 45 3 (2017): 412-420. http://www.scopus.com/inward/record.url?eid=2-s2.0-85016113263&partnerID=MN8TOARS.
    10.5937/fmet1703412L
  127. Lorenzini, G.; Barreto, E.X.; Beckel, C.C.; Schneider, P.S.; Isoldi, L.A.; dos Santos, E.D.; Rocha, L.A.O.. "Geometrical evaluation of T-shaped high conductive pathway with thermal contact resistance for cooling of heat-generating medium". International Journal of Heat and Mass Transfer 108 (2017): 1884-1893. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009967838&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2017.01.008
  128. Vianna, J.C.B.; Estrada, E.D.S.D.; Isoldi, L.A.; Dos Santos, E.D.; Souza, J.A.. "Design of cooling cavities by the application of the constructal design". Defect and Diffusion Forum 372 (2017): 163-169. http://www.scopus.com/inward/record.url?eid=2-s2.0-85014904659&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.372.163
  129. Das Neves Gomes, M.; Amado, E.A.; Dos Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.. "Numerical analysis of the oscillating water column (OWC) wave energy converter (WEC) considering different incident wave height". Defect and Diffusion Forum 370 (2017): 120-129. http://www.scopus.com/inward/record.url?eid=2-s2.0-85011082315&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.370.120
  130. Hermany, L.; Klein, R.J.; Zinani, F.F.; Isoldi, L.A.; Dos Santos, E.D.; Rocha, L.A.O.. "Numerical study of the effect of Reynolds number and aspect ratio in heat transfer from elliptical tubes to viscoplastic fluids employing constructal design". Defect and Diffusion Forum 372 (2017): 142-151. http://www.scopus.com/inward/record.url?eid=2-s2.0-85014945350&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.372.142
  131. Feijó, B.C.; Dos Santos Pereira, M.; Teixeira, F.B.; Isoldi, L.A.; Rocha, L.A.O.; Goulart, J.N.V.; Dos Santos, E.D.. "Constructal design applied to a channel with triangular fins submitted to forced convection". Defect and Diffusion Forum 372 (2017): 152-162. http://www.scopus.com/inward/record.url?eid=2-s2.0-85014939155&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.372.152
  132. Gonzales, G.V.; Dos Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.; Da Silva Neto, A.J.; Telles, W.R.. "Constructal design of double-T shaped cavity with stochastic methods Luus-Jaakola and simulated annealing". Defect and Diffusion Forum 370 (2017): 152-161. http://www.scopus.com/inward/record.url?eid=2-s2.0-85011049544&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.370.152
  133. Razera, A.L.; Fagundes, T.M.; Seibt, F.M.; Da Fonseca, R.J.C.; Varela, D.J.C.; Ortiz, P.R.B.; Coelho, F.R.; et al. "Constructal design of a triangular fin inserted in a cavity with mixed convection lid-driven flow". Defect and Diffusion Forum 372 (2017): 188-201. http://www.scopus.com/inward/record.url?eid=2-s2.0-85014885497&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.372.188
  134. Pereira, M.D.S.; Feijó, B.C.; Teixeira, F.B.; Isoldi, L.A.; Rocha, L.A.O.; Goulart, J.N.V.; Dos Santos, E.D.. "Geometric evaluation of forced convective flows across an arrangement of four circular cylinders". Defect and Diffusion Forum 372 (2017): 110-121. http://www.scopus.com/inward/record.url?eid=2-s2.0-85014917317&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.372.110
  135. Barros, G.M.; Lorenzini, G.; Isoldi, L.A.; Rocha, L.A.O.; dos Santos, E.D.. "Influence of mixed convection laminar flows on the geometrical evaluation of a triangular arrangement of circular cylinders". International Journal of Heat and Mass Transfer 114 (2017): 1188-1200. http://www.scopus.com/inward/record.url?eid=2-s2.0-85023192908&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2017.07.010
  136. Härter,Fabiane Valente; Souza,Jeferson Avila; Isoldi,Liércio André; Santos,Elizaldo Domingues dos; Amico,Sandro Campos. "Transverse permeability determination and influence in resin flow through an orthotropic medium in the RTM process". (2017): http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1517-70762017000200501.
  137. Härter,Fabiane Valente; Souza,Jeferson Avila; Isoldi,Liércio André; Santos,Elizaldo Domingues dos; Amico,Sandro Campos. "Transverse permeability determination and influence in resin flow through an orthotropic medium in the RTM process". (2017): http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1517-70762017000200501.
  138. Härter,Fabiane Valente; Souza,Jeferson Avila; Isoldi,Liércio André; Santos,Elizaldo Domingues dos; Amico,Sandro Campos. "Transverse permeability determination and influence in resin flow through an orthotropic medium in the RTM process". (2017): http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1517-70762017000200501.
  139. Brum, R.S.; Ramalho, J.V.A.; Rocha, L.A.O.; Isoldi, L.A.; Dos Santos, E.D.. "Transient models to analyze the influence of the air velocity and ducts diameter on the performance of earth-air heat exchangers". International Journal of Fluid Mechanics Research 43 5-6 (2016): 503-520. http://www.scopus.com/inward/record.url?eid=2-s2.0-85005870152&partnerID=MN8TOARS.
    10.1615/InterJFluidMechRes.v43.i56.100
  140. Aldrighi, E.S.; Rodrigues, P.M.; Rodriguez, B.D.D.A.; Isoldi, L.A.; Rocha, L.A.O.; Dos Santos, E.D.. "Constructal design of rectangular fin intruded into different surfaces of forced convective lid-driven cavity flow". International Journal of Fluid Mechanics Research 43 5-6 (2016): 418-440. http://www.scopus.com/inward/record.url?eid=2-s2.0-85005929962&partnerID=MN8TOARS.
    10.1615/InterJFluidMechRes.v43.i56.50
  141. Lorenzini, G.; Barreto, E.X.; Beckel, C.C.; Schneider, P.S.; Isoldi, L.A.; Dos Santos, E.D.; Rocha, L.A.O.. "Constructal design of I-shaped high conductive pathway for cooling a heat-generating medium considering the thermal contact resistance". International Journal of Heat and Mass Transfer 93 (2016): 770-777. http://www.scopus.com/inward/record.url?eid=2-s2.0-84946944098&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2015.10.015
  142. Dos Santos, E.D.; Rodrigues, M.P.; De Andrade, T.S.V.C.; Isoldi, L.A.; França, F.H.R.; Rocha, L.A.O.. "Numerical study of different closure approaches for prediction of forced convective turbulent cylindrical cavity flows". Defect and Diffusion Forum 366 (2016): 166-181. http://www.scopus.com/inward/record.url?eid=2-s2.0-84973468646&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.366.166
  143. Lorenzini, G.; Helbig, D.; Da Silva, C.C.C.; De Vasconcellos Real, M.; Dos Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.. "Numerical evaluation of the effect of type and shape of perforations on the buckling of thin steel plates by means of the constructal design method". International Journal of Heat and Technology 34 (2016): S9-S20. http://www.scopus.com/inward/record.url?eid=2-s2.0-84956664581&partnerID=MN8TOARS.
    10.18280/ijht.34S102
  144. Lorenzini, G.; Machado, B.S.; Isoldi, L.A.; Dos Santos, E.D.; Rocha, L.A.O.. "Constructal design of rectangular fin intruded into mixed convective lid-driven cavity flows". Journal of Heat Transfer 138 10 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84974574881&partnerID=MN8TOARS.
    10.1115/1.4033378
  145. Magalhães, G.M.C.; Lorenzini, G.; Nardi, M.G.; Amico, S.C.; Isoldi, L.A.; Rocha, L.A.O.; Souza, J.A.; Dos Santos, E.D.. "Geometrical evaluation of a resin infusion process by means of constructal design". International Journal of Heat and Technology 34 (2016): S101-S108. http://www.scopus.com/inward/record.url?eid=2-s2.0-84956639948&partnerID=MN8TOARS.
    10.18280/ijht.34S113
  146. Lorenzini, G.; Helbig, D.; Real, M.V.; dos Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.. "Computational modeling and constructal design method applied to the mechanical behavior improvement of thin perforated steel plates subject to buckling". Journal of Engineering Thermophysics 25 2 (2016): 197-215. http://www.scopus.com/inward/record.url?eid=2-s2.0-84969855983&partnerID=MN8TOARS.
    10.1134/S1810232816020053
  147. Helbig, D.; Da Silva, C.C.C.; Real, M.V.; dos Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.. "Study about buckling phenomenon in perforated thin steel plates employing computational modeling and constructal design method". Latin American Journal of Solids and Structures 13 10 (2016): 1912-1936. http://www.scopus.com/inward/record.url?eid=2-s2.0-84973622849&partnerID=MN8TOARS.
    10.1590/1679-78252893
  148. Helbig,Daniel; Silva,Caio Cesar Cardoso da; Real,Mauro de Vasconcellos; Santos,Elizaldo Domingues dos; Isoldi,Liércio André; Rocha,Luiz Alberto Oliveira. "Study About Buckling Phenomenon in Perforated Thin Steel Plates Employing Computational Modeling and Constructal Design Method". (2016): http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1679-78252016001001912.
  149. Helbig,Daniel; Silva,Caio Cesar Cardoso da; Real,Mauro de Vasconcellos; Santos,Elizaldo Domingues dos; Isoldi,Liércio André; Rocha,Luiz Alberto Oliveira. "Study About Buckling Phenomenon in Perforated Thin Steel Plates Employing Computational Modeling and Constructal Design Method". (2016): http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1679-78252016001001912.
  150. Helbig,Daniel; Silva,Caio Cesar Cardoso da; Real,Mauro de Vasconcellos; Santos,Elizaldo Domingues dos; Isoldi,Liércio André; Rocha,Luiz Alberto Oliveira. "Study About Buckling Phenomenon in Perforated Thin Steel Plates Employing Computational Modeling and Constructal Design Method". (2016): http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1679-78252016001001912.
  151. Daniel Helbig; Roberta Da Silva Michaello; Elizaldo Domingues Dos Santos; Mauro De Vasconcellos Real; Luiz Alberto Oliveira Rocha; Liércio André Isoldi. "Análise numérica da flambagem térmica em placas finas de aço". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081308.
    10.14808/sci.plena.2015.081308
  152. Renata Costa de Almeida Alonso; Diego Souza de Lima; Matheus Gomes; Mauro De Vasconcellos Real; Elizaldo Domingues dos Santos; Liércio André Isoldi. "Modelagem computacional aplicada à flambagem elástica de colunas". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081310.
    10.14808/sci.plena.2015.081310
  153. Emanuel Da Silva Diaz Estrada; Gill Velleda Gonzales; Elizaldo Domingues Dos Santos; Liércio André Isoldi; Luiz Alberto Oliveira Rocha. "Constructal design aplicado à cavidades convectivas inseridas em um sólido cilíndrico". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081325.
    10.14808/sci.plena.2015.081325
  154. Vinícius Timm Bonow; Fabiano Jorge Macedo; Elizaldo Domingues Dos Santos; Fabiane Binsfeld Ferreira dos Santos; Felipe Bier De Mello; Liércio André Isoldi. "Análise da influência de parâmetros construtivos no funcionamento de um equipamento de infusão mecanizada". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081307.
    10.14808/sci.plena.2015.081307
  155. Bruna Rodrigues Nunes; Juliane Gabina Ferraz; Ricardo Kipper; Michel Kepes Rodrigues; Ruth Da Silva Brum; Jeferson Avila Souza; Luiz Alberto Oliveira Rocha; Elizaldo Domingues Dos Santos; Liércio André Isoldi. "Modelagem computacional aplicada ao estudo de um trocador de calor solo-ar com diferentes configurações geométricas". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081305.
    10.14808/sci.plena.2015.081305
  156. Sandro Troian; Caio Cesar Cardoso da Silva; Luiz Alberto Oliveira Rocha; Elizaldo Domingues dos Santos; Liércio André Isoldi; Mauro Vasconcellos Real. "Análise Numérica do Comportamento Mecânico de Placas Finas Perfuradas de Materiais Compósitos sob Flexão". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081309.
    10.14808/sci.plena.2015.081309
  157. Gabriel Moraes Barros; Diego Mion Do Carmo; Rafael Cemin; Marcelo Moraes Galarça; Liércio André Isoldi; Luiz Alberto Oliveira Rocha; Elizaldo Domingues Dos Santos. "Influência da Convecção Mista sobre a Otimização Geométrica de um Arranjo Triangular de Cilindros em Escoamentos Laminares". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081311.
    10.14808/sci.plena.2015.081311
  158. Carine Marzarotto; Bruna Nunes; Michel Kepes Rodrigues; Jeferson Avila Souza; Luiz Alberto Oliveira Rocha; Elizaldo Domingues Dos Santos; Liércio André Isoldi. "Análise numérica da influência de parâmetros operacionais e construtivos no funcionamento de trocadores de calor solo-ar". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081304.
    10.14808/sci.plena.2015.081304
  159. Marcelo Moraes Goulart; Jaifer Corrêa Martins; Mateus Das Neves Gomes; Ivoni Carlos Acunha Jr; Jeferson Avila Souza; Luiz Alberto Oliveira Rocha; Liércio André Isoldi; Elizaldo Domingues Dos Santos. "Constructal Design de um dispositivo de galgamento onshore em escala real para uma profundidade fixa". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081313.
    10.14808/sci.plena.2015.081313
  160. Juliane Gabina Ferraz; Bruna Rodrigues Nunes; Michel Kepes Rodrigues; Ruth Da S. Brum; Jeferson Avila Souza; Luiz Alberto Oliveira Rocha; Liércio André Isoldi; Elizaldo Domingues Dos Santos. "Modelagem computacional de um trocador de calor solo-ar empregando diferentes modelagens para turbulência". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081314.
    10.14808/sci.plena.2015.081314
  161. Gill Velleda Gonzales; Elizaldo Domingues dos Santos; Leonardo Ramos Emmendorfer; Liércio André Isoldi; Luiz Alberto Oliveira Rocha; Emanuel Da Silva Diaz Estrada. "A Comparative Study of Simulated Annealing with different Cooling Schedules for Geometric Optimization of a Heat Transfer Problem According to Constructal Design". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081321.
    10.14808/sci.plena.2015.081321
  162. Suelem Grellert Da Fonseca; Felipe Rodrigues Cardoso; Andre Luiz Razera; Liércio André Isoldi; Anderson Favero Porte; Luiz Alberto Oliveira Rocha; Elizaldo Domingues Dos Santos; Marcelo Moraes Galarça. "Estudo numérico de um arranjo triangular de cilindros submetidos a escoamento laminar com convecção forçada". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081324.
    10.14808/sci.plena.2015.081324
  163. Michel Kepes Rodrigues; Marcelo Moraes Goulart; Daniel Helbig; Glauciléia M. C. Magalhães; Ivoni Calos Acunha Junior; Luiz Alberto Oliveira Rocha; Liércio André Isoldi; Elizaldo Domingues Dos Santos. "Constructal Design aplicado à otimização geométrica de um material de alta condutividade térmica em forma de "T"". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081328.
    10.14808/sci.plena.2015.081328
  164. Michel Kepes Rodrigues; Jeferson Avila Souza; Joaquim Vaz; Ivoni Carlos Acunha Junior; Luiz Alberto Oliveira Rocha; Ruth Da Silva Brum; Elizaldo Domingues dos Santos; Liércio André Isoldi. "Estudo numérico da influência de condições de contorno na modelagem computacional de trocador de calor solo-ar". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081334.
    10.14808/sci.plena.2015.081334
  165. Thiago Smith Vasconcellos Coimbra De Andrade; Marco Paulsen Rodrigues; Liércio André Isoldi; Jeferson Avila Souza; Felipe Roman Centeno; Luiz Alberto Oliveira Rocha; Francis Henrique Ramos França; Elizaldo Domingues Dos Santos. "Estudo numérico de escoamentos turbulentos com convecção forçada em cavidades cilíndricas: comparação entre LES e RANS". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081302.
    10.14808/sci.plena.2015.081302
  166. Carine Marzarotto; Bruna Nunes; Michel Kepes Rodrigues; Jeferson Avila Souza; Luiz Alberto Oliveira Rocha; Elizaldo Domingues Dos Santos; Liércio André Isoldi. "Análise numérica da influência de parâmetros operacionais e construtivos no funcionamento de trocadores de calor solo-ar". Scientia Plena 11 8 (2015): 11-11. https://doi.org/10.14808%2F10.14808%2Fsci.plena.2015.081304.
    10.14808/10.14808/sci.plena.2015.081304
  167. Ivoni Carlos Acunha Junior; Stephanie Dos Santos Pohlmann; Lissandra Silveira Da Silveira; Marco Aurélio dos Santos Rahn; Anderson Favero Porte; Elizaldo Domingues dos Santos; Liércio André Isoldi; Michel Kepes Rodrigues. "Estudo experimental e computacional de um compressor de refrigeração operando sob condições controladas em uma câmara calorimétrica". Scientia Plena 11 8 (2015): https://doi.org/10.14808%2Fsci.plena.2015.081329.
    10.14808/sci.plena.2015.081329
  168. Ruth Da Silva Brum; Jairo Valões de Alencar Ramalho; Luiz Alberto Oliveira Rocha; Liércio André Isoldi; Elizaldo Domingues Dos Santos. "A Matlab code to fit periodic data". Revista Brasileira de Computação Aplicada 7 2 (2015): https://doi.org/10.5335%2Frbca.2015.4618.
    10.5335/rbca.2015.4618
  169. Mateus das Neves Gomes; Maria Fernanda Espinel Lara; Silvana Letícia Pires Iahnke; Bianca Neves Machado; Marcelo Moraes Goulart; Flávio Medeiros Seibt; Elizaldo Domingues dos Santos; Liércio André Isoldi; Luiz Alberto Oliveira Rocha. "Numerical Approach of the Main Physical Operational Principle of Several Wave Energy Converters: Oscillating Water Column, Overtopping and Submerged Plate". Defect and Diffusion Forum 362 (2015): 115-171. https://doi.org/10.4028%2Fwww.scientific.net%2Fddf.362.115.
    10.4028/www.scientific.net/ddf.362.115
  170. Estrada, E.D.S.D.; Fagundes, T.M.; Isoldi, L.A.; Dos Santos, E.D.; Xie, G.; Rocha, L.A.O.. "Constructal Design Associated to Genetic Algorithm of Asymmetric V-Shaped Pathways". Journal of Heat Transfer 137 6 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84924940267&partnerID=MN8TOARS.
    10.1115/1.4029868
  171. Gonzales, G.V.; Estrada, E.D.S.D.; Emmendorfer, L.R.; Isoldi, L.A.; Xie, G.; Rocha, L.A.O.; dos Santos, E.D.. "A comparison of simulated annealing schedules for constructal design of complex cavities intruded into conductive walls with internal heat generation". Energy 93 (2015): 372-382. http://www.scopus.com/inward/record.url?eid=2-s2.0-84949664673&partnerID=MN8TOARS.
    10.1016/j.energy.2015.09.058
  172. Lorenzini, G.; Da Silva Diaz Estrada, E.; Dos Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.. "Constructal design of convective cavities inserted into a cylindrical solid body for cooling". International Journal of Heat and Mass Transfer 83 (2015): 75-83. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919833151&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2014.11.065
  173. Kepes Rodrigues, M.; da Silva Brum, R.; Vaz, J.; Oliveira Rocha, L.A.; Domingues dos Santos, E.; Isoldi, L.A.. "Numerical investigation about the improvement of the thermal potential of an Earth-Air Heat Exchanger (EAHE) employing the Constructal Design method". Renewable Energy 80 (2015): 538-551. http://www.scopus.com/inward/record.url?eid=2-s2.0-84924559395&partnerID=MN8TOARS.
    10.1016/j.renene.2015.02.041
  174. Das Neves Gomes, M.; Domingues Dos Santos, E.; Isoldi, L.A.; Rocha, L.A.O.. "Numerical analysis including pressure drop in oscillating water column device". Open Engineering 5 1 (2015): 229-237. http://www.scopus.com/inward/record.url?eid=2-s2.0-84935848733&partnerID=MN8TOARS.
    10.1515/eng-2015-0019
  175. Lorenzini, G.; Lara, M.F.E.; Rocha, L.A.O.; Gomes, M.D.N.; Dos Santos, E.D.; Isoldi, L.A.. "Constructal design applied to the study of the geometry and submergence of an Oscillating Water Column". International Journal of Heat and Technology 33 2 (2015): 31-38. http://www.scopus.com/inward/record.url?eid=2-s2.0-84938355965&partnerID=MN8TOARS.
    10.18280/ijht.330205
  176. Goulart, M.M.; Martins, J.C.; Junior, I.C.A.; das Neves Gomes, M.; Souza, J.A.; Rocha, L.A.O.; Isoldi, L.A.; dos Santos, E.D.. "Constructal design of an onshore overtopping device in real scale for two different depths". Marine Systems and Ocean Technology 10 2 (2015): 120-129. http://www.scopus.com/inward/record.url?eid=2-s2.0-85034950211&partnerID=MN8TOARS.
    10.1007/s40868-015-0010-7
  177. Link, Fernanda Bichet; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Constructal design of a x-shaped cavity cooled by convection". (2015): http://repositorio.furg.br/handle/1/4983.
  178. Bolzan, Claus de Rosso; Santos, Elizaldo Domingues dos; Isoldi, Liercio André; Rocha, Luiz Alberto Oliveira. "Geometric optimization of bodies submitted to an intense heat flux using bifurcated channel nets". (2015): http://repositorio.furg.br/handle/1/5060.
  179. Santos, Elizaldo Domingues dos; Petry, Adriane Prisco; Rocha, Luiz Alberto Oliveira; França, Francis Henrique Ramos. "Numerical study of forced convection lid-driven cavity flows using LES (Large Eddy Simulation)". (2015): http://repositorio.furg.br/handle/1/5069.
  180. Gomes, Mateus das Neves; Nascimento, Cristina Dias do; Bonafini, Beatriz Leandro; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira. "Two-dimensional geometric optimization of an oscillating water column converter in laboratory scale". (2015): http://repositorio.furg.br/handle/1/4910.
  181. Marques, Crístofer Hood; Isoldi, Liércio André; Santos, Elizaldo Domingues dos; Rocha, Luiz Alberto Oliveira. "Constructal design of a vortex tube for several inlet stagnation pressures". (2015): http://repositorio.furg.br/handle/1/4911.
  182. Brum, Ruth da Silva; Isoldi, Liércio André; Santos, Elizaldo Domingues dos; Vaz, Joaquim; Rocha, Luiz Alberto Oliveira. "Two-dimensional computational modeling of the soil thermal behavior due to the incidence of solar radiation". (2015): http://repositorio.furg.br/handle/1/4968.
  183. Lorenzini, Giulio; Biserni, Cesare; Link, Fernanda Bichet; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira. "Constructal design of isothermal x-shaped cavities". (2015): https://doi.org/10.2298/TSCI120804005L.
    https://doi.org/10.2298/TSCI120804005L
  184. Helbig, Daniel; Real, Mauro de Vasconcellos; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Análise numérica do comportamento mecânico sob flexão de placas finas de material compósito laminado reforçado por fibras". (2015): http://repositorio.furg.br/handle/1/4923.
  185. Rocha, Luiz Alberto Oliveira; Isoldi, Liércio André; Real, Mauro de Vasconcellos; Santos, Elizaldo Domingues dos; Correia, Anderson Luis Garcia; Lorenzini, Giulio; Biserni, Cesare. "Constructal design applied to the elastic buckling of thin plates with holes". (2015): https://doi.org/10.2478/s13531-013-0105-x.
    https://doi.org/10.2478/s13531-013-0105-x
  186. Pedrotti, Vagner Andrade; Souza, Jeferson Avila; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Constructal design of a tubular array subjected to forced convection.". (2015): http://repositorio.furg.br/handle/1/5070.
  187. Vieira, Rodrigo Spotorno; Garcia, Claudio; Acunha Júnior, Ivoni Carlos; Souza, Jeferson Avila; Rocha, Luis Alberto Oliveira; Isoldi, Liércio André; Santos, Elizaldo Domingues dos. "Numerical study of the influence of geometric parameters on the avaliable power in a solar chimney". (2015): http://repositorio.furg.br/handle/1/5149.
  188. Seibt, Flávio Medeiros; Letzow, Max; Gomes, Mateus das Neves; Souza, Jeferson Avila; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Computational modeling applied to the study of wave energy converters (WEC)". (2015): http://repositorio.furg.br/handle/1/4912.
  189. Brum, Ruth da Silva; Ramalho, Jairo Valões de Alencar; Rocha, Luiz Alberto Oliveira; Isoldi, Liércio André; Santos, Elizaldo Domingues dos. "A matlab code to fit periodic data". (2015): https://doi.org/10.5335/rbca.2015.4618.
    https://doi.org/10.5335/rbca.2015.4618
  190. Porto, Joseane da Silva; Letzow, Max; Santos, Elizaldo Domingues dos; Amico, Sandro Campos; Souza, Jeferson Avila; Isoldi, Liércio André. "Computational modeling of RTM and LRTM processes applied to complex geometries". (2015): http://repositorio.furg.br/handle/1/4986.
  191. Gomes, Mateus das Neves; Seibt, Flávio Medeiros; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Numerical analysis of an oscillating water column converter considering a physical constraint in the chimney outlet". (2015): http://repositorio.furg.br/handle/1/4943.
  192. Galarça, Marcelo Moraes; Cardoso, Felipe Rodrigues; Razera, Andre Luis; Acunha Junior, Ivoni Carlos; Isoldi, Liércio André; Porte, Anderson Favero; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos. "Otimização geométrica de um arranjo triangular de cilindros submetido a escoamento laminar com convecção forçada". (2015): http://repositorio.furg.br/handle/1/4980.
  193. Lorenzini, Giulio; Biserni, Cesare; Link, Fernanda Bichet; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira. "Constructal design of isothermal x-shaped cavities". (2015): https://doi.org/10.2298/TSCI120804005L.
    https://doi.org/10.2298/TSCI120804005L
  194. Santos, Elizaldo Domingues dos; Silva, Fábio de Moraes Vaz da; Acunha Junior, Ivoni Carlos; Galarça, Marcelo Moraes; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira. "Numerical investigation of turbulent forced convective flows over a pair of circular cylinders". (2015): http://repositorio.furg.br/handle/1/4930.
  195. Isoldi, Liércio André; Grimmler, Juliana do Amaral Martins; Letzow, Max; Souza, Jeferson Avila; Gomes, Mateus das Neves; Rocha, Luis Alberto Oliveira; Santos, Elizaldo Domingues dos. "3D numerical analysis about the shape influence of the hydro-pneumatic chamber in an oscillating water column (owc).". (2015): http://repositorio.furg.br/handle/1/5071.
  196. Porto, Joseane da Silva; Letzow, Max; Santos, Elizaldo Domingues dos; Amico, Sandro Campos; Souza, Jeferson Avila; Isoldi, Liércio André. "Computational modeling of RTM and LRTM processes applied to complex geometries". (2015): http://repositorio.furg.br/handle/1/4986.
  197. Link, Fernanda Bichet; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Constructal design of a x-shaped cavity cooled by convection". (2015): http://repositorio.furg.br/handle/1/4983.
  198. Gomes, Mateus das Neves; Seibt, Flávio Medeiros; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Numerical analysis of an oscillating water column converter considering a physical constraint in the chimney outlet". (2015): http://repositorio.furg.br/handle/1/4943.
  199. Pedrotti, Vagner Andrade; Souza, Jeferson Avila; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Constructal design of a tubular array subjected to forced convection.". (2015): http://repositorio.furg.br/handle/1/5070.
  200. Rocha, Luiz Alberto Oliveira; Isoldi, Liércio André; Real, Mauro de Vasconcellos; Santos, Elizaldo Domingues dos; Correia, Anderson Luis Garcia; Lorenzini, Giulio; Biserni, Cesare. "Constructal design applied to the elastic buckling of thin plates with holes". (2015): https://doi.org/10.2478/s13531-013-0105-x.
    https://doi.org/10.2478/s13531-013-0105-x
  201. Bolzan, Claus de Rosso; Santos, Elizaldo Domingues dos; Isoldi, Liercio André; Rocha, Luiz Alberto Oliveira. "Geometric optimization of bodies submitted to an intense heat flux using bifurcated channel nets". (2015): http://repositorio.furg.br/handle/1/5060.
  202. Marques, Crístofer Hood; Isoldi, Liércio André; Santos, Elizaldo Domingues dos; Rocha, Luiz Alberto Oliveira. "Constructal design of a vortex tube for several inlet stagnation pressures". (2015): http://repositorio.furg.br/handle/1/4911.
  203. Helbig, Daniel; Real, Mauro de Vasconcellos; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Análise numérica do comportamento mecânico sob flexão de placas finas de material compósito laminado reforçado por fibras". (2015): http://repositorio.furg.br/handle/1/4923.
  204. Brum, Ruth da Silva; Isoldi, Liércio André; Santos, Elizaldo Domingues dos; Vaz, Joaquim; Rocha, Luiz Alberto Oliveira. "Two-dimensional computational modeling of the soil thermal behavior due to the incidence of solar radiation". (2015): http://repositorio.furg.br/handle/1/4968.
  205. Gomes, Mateus das Neves; Nascimento, Cristina Dias do; Bonafini, Beatriz Leandro; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira. "Two-dimensional geometric optimization of an oscillating water column converter in laboratory scale". (2015): http://repositorio.furg.br/handle/1/4910.
  206. Brum, Ruth da Silva; Ramalho, Jairo Valões de Alencar; Rocha, Luiz Alberto Oliveira; Isoldi, Liércio André; Santos, Elizaldo Domingues dos. "A matlab code to fit periodic data". (2015): https://doi.org/10.5335/rbca.2015.4618.
    https://doi.org/10.5335/rbca.2015.4618
  207. Bolzan, Claus de Rosso; Santos, Elizaldo Domingues dos; Isoldi, Liercio André; Rocha, Luiz Alberto Oliveira. "Geometric optimization of bodies submitted to an intense heat flux using bifurcated channel nets". (2015): http://repositorio.furg.br/handle/1/5060.
  208. Lorenzini, Giulio; Biserni, Cesare; Link, Fernanda Bichet; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira. "Constructal design of isothermal x-shaped cavities". (2015): https://doi.org/10.2298/TSCI120804005L.
    https://doi.org/10.2298/TSCI120804005L
  209. Seibt, Flávio Medeiros; Letzow, Max; Gomes, Mateus das Neves; Souza, Jeferson Avila; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Computational modeling applied to the study of wave energy converters (WEC)". (2015): http://repositorio.furg.br/handle/1/4912.
  210. Santos, Elizaldo Domingues dos; Petry, Adriane Prisco; Rocha, Luiz Alberto Oliveira; França, Francis Henrique Ramos. "Numerical study of forced convection lid-driven cavity flows using LES (Large Eddy Simulation)". (2015): http://repositorio.furg.br/handle/1/5069.
  211. Link, Fernanda Bichet; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Constructal design of a x-shaped cavity cooled by convection". (2015): http://repositorio.furg.br/handle/1/4983.
  212. Gomes, Mateus das Neves; Seibt, Flávio Medeiros; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Numerical analysis of an oscillating water column converter considering a physical constraint in the chimney outlet". (2015): http://repositorio.furg.br/handle/1/4943.
  213. Rocha, Luiz Alberto Oliveira; Isoldi, Liércio André; Real, Mauro de Vasconcellos; Santos, Elizaldo Domingues dos; Correia, Anderson Luis Garcia; Lorenzini, Giulio; Biserni, Cesare. "Constructal design applied to the elastic buckling of thin plates with holes". (2015): https://doi.org/10.2478/s13531-013-0105-x.
    https://doi.org/10.2478/s13531-013-0105-x
  214. Marques, Crístofer Hood; Isoldi, Liércio André; Santos, Elizaldo Domingues dos; Rocha, Luiz Alberto Oliveira. "Constructal design of a vortex tube for several inlet stagnation pressures". (2015): http://repositorio.furg.br/handle/1/4911.
  215. Pedrotti, Vagner Andrade; Souza, Jeferson Avila; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Constructal design of a tubular array subjected to forced convection.". (2015): http://repositorio.furg.br/handle/1/5070.
  216. Helbig, Daniel; Real, Mauro de Vasconcellos; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Análise numérica do comportamento mecânico sob flexão de placas finas de material compósito laminado reforçado por fibras". (2015): http://repositorio.furg.br/handle/1/4923.
  217. Santos, Elizaldo Domingues dos; Silva, Fábio de Moraes Vaz da; Acunha Junior, Ivoni Carlos; Galarça, Marcelo Moraes; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira. "Numerical investigation of turbulent forced convective flows over a pair of circular cylinders". (2015): http://repositorio.furg.br/handle/1/4930.
  218. Brum, Ruth da Silva; Ramalho, Jairo Valões de Alencar; Rocha, Luiz Alberto Oliveira; Isoldi, Liércio André; Santos, Elizaldo Domingues dos. "A matlab code to fit periodic data". (2015): https://doi.org/10.5335/rbca.2015.4618.
    https://doi.org/10.5335/rbca.2015.4618
  219. Brum, Ruth da Silva; Isoldi, Liércio André; Santos, Elizaldo Domingues dos; Vaz, Joaquim; Rocha, Luiz Alberto Oliveira. "Two-dimensional computational modeling of the soil thermal behavior due to the incidence of solar radiation". (2015): http://repositorio.furg.br/handle/1/4968.
  220. Vieira, Rodrigo Spotorno; Garcia, Claudio; Acunha Júnior, Ivoni Carlos; Souza, Jeferson Avila; Rocha, Luis Alberto Oliveira; Isoldi, Liércio André; Santos, Elizaldo Domingues dos. "Numerical study of the influence of geometric parameters on the avaliable power in a solar chimney". (2015): http://repositorio.furg.br/handle/1/5149.
  221. Gomes, Mateus das Neves; Nascimento, Cristina Dias do; Bonafini, Beatriz Leandro; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira. "Two-dimensional geometric optimization of an oscillating water column converter in laboratory scale". (2015): http://repositorio.furg.br/handle/1/4910.
  222. Porto, Joseane da Silva; Letzow, Max; Santos, Elizaldo Domingues dos; Amico, Sandro Campos; Souza, Jeferson Avila; Isoldi, Liércio André. "Computational modeling of RTM and LRTM processes applied to complex geometries". (2015): http://repositorio.furg.br/handle/1/4986.
  223. Galarça, Marcelo Moraes; Cardoso, Felipe Rodrigues; Razera, Andre Luis; Acunha Junior, Ivoni Carlos; Isoldi, Liércio André; Porte, Anderson Favero; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos. "Otimização geométrica de um arranjo triangular de cilindros submetido a escoamento laminar com convecção forçada". (2015): http://repositorio.furg.br/handle/1/4980.
  224. Isoldi, Liércio André; Grimmler, Juliana do Amaral Martins; Letzow, Max; Souza, Jeferson Avila; Gomes, Mateus das Neves; Rocha, Luis Alberto Oliveira; Santos, Elizaldo Domingues dos. "3D numerical analysis about the shape influence of the hydro-pneumatic chamber in an oscillating water column (owc).". (2015): http://repositorio.furg.br/handle/1/5071.
  225. "An experimental study on the use of Earth-Air Heat Exchangers (EAHE)". Energy and Buildings (2014):
    10.1016/j.enbuild.2013.12.009
  226. Dos Santos Horbach, C.; Dos Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.. "Constructal design of y-shaped conductive pathways for cooling a heat-generating body". Defect and Diffusion Forum 348 (2014): 245-260. http://www.scopus.com/inward/record.url?eid=2-s2.0-84894267858&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.348.245
  227. Lorenzini, G.; Biserni, C.; Link, F.B.; Dos Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.. "Constructal design of isothermal X-shaped cavities". Thermal Science 18 2 (2014): 349-356. http://www.scopus.com/inward/record.url?eid=2-s2.0-84902496229&partnerID=MN8TOARS.
    10.2298/TSCI120804005L
  228. Dos Santos, E.D.; Isoldi, L.A.; Petry, A.P.; França, F.H.R.. "A numerical study of combined convective and radiative heat transfer in non-reactive turbulent channel flows with several optical thicknesses: A comparison between les and RANS". Journal of the Brazilian Society of Mechanical Sciences and Engineering 36 1 (2014): 207-219. http://www.scopus.com/inward/record.url?eid=2-s2.0-84891856117&partnerID=MN8TOARS.
    10.1007/s40430-013-0075-1
  229. Seibt, F.M.; Couto, E.C.; dos Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.; Teixeira, P.R.F.. "Numerical study on the effect of submerged depth on the horizontal plate wave energy converter". China Ocean Engineering 28 5 (2014): 687-700. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919657849&partnerID=MN8TOARS.
    10.1007/s13344-014-0056-x
  230. Lorenzini, G.; Biserni, C.; Da Silva Diaz Estrada, E.; Santos, E.D.D.; Isoldi, L.A.; Rocha, L.A.O.. "Genetic algorithm applied to geometric optimization of isothermal Y-shaped cavities". Journal of Electronic Packaging, Transactions of the ASME 136 3 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84900450431&partnerID=MN8TOARS.
    10.1115/1.4027421
  231. Seibt, F.M.; Couto, E.C.; Teixeira, P.R.F.; dos Santos, E.D.; Rocha, L.A.O.; Isoldi, L.A.. "Numerical analysis of the fluid-dynamic behavior of a submerged plate wave energy converter". Computational Thermal Sciences 6 6 (2014): 525-534. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920918445&partnerID=MN8TOARS.
  232. Lorenzini, G.; Biserni, C.; Estrada, E.D.; Isoldi, L.A.; Santos, E.D.D.; Rocha, L.A.O.. "Constructal design of convective Y-shaped cavities by means of genetic algorithm". Journal of Heat Transfer 136 7 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84904465995&partnerID=MN8TOARS.
    10.1115/1.4027195
  233. Lorenzini, G.; Biserni, C.; Correa, R.L.; Dos Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.. "Constructal design of T-shaped assemblies of fins cooling a cylindrical solid body". International Journal of Thermal Sciences 83 1 (2014): 96-103. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901648333&partnerID=MN8TOARS.
    10.1016/j.ijthermalsci.2014.04.011
  234. Dos Santos, E.D.; Machado, B.N.; Zanella, M.M.; Das Neves Gomes, M.; Souza, J.A.; Isoldi, L.A.; Rocha, L.A.O.. "Numerical study of the effect of the relative depth on the overtopping wave energy converters according to constructal design". Defect and Diffusion Forum 348 (2014): 232-244. http://www.scopus.com/inward/record.url?eid=2-s2.0-84894239052&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.348.232
  235. Isoldi, L. A.; Real, M. V.; Correia, A. L. G.; Vaz, J.; dos Santos, E. D.; Rocha, L. A. O.; Rocha, LAO; Lorente, S; Bejan, A. "Flow of Stresses: Constructal Design of Perforated Plates Subjected to Tension or Buckling". Constructal Law and the Unifying Principle of Design (2013): 195-217.
    10.1007/978-1-4614-5049-8_12
  236. dos Santos, E. D.; Machado, B. N.; Lopes, N.; Souza, J. A.; Teixeira, P. R. F.; Gomes, M. N.; Isoldi, L. A.; et al. "Constructal Design of Wave Energy Converters". Constructal Law and the Unifying Principle of Design (2013): 275-294.
    10.1007/978-1-4614-5049-8_16
  237. dos Santos, E. D.; Marques, C. H.; Stanescu, G.; Isoldi, L. A.; Rocha, L. A. O.; Rocha, LAO; Lorente, S; Bejan, A. "Constructal Design of Vortex Tubes". Constructal Law and the Unifying Principle of Design (2013): 259-273.
    10.1007/978-1-4614-5049-8_15
  238. Rocha, L. A. O.; dos Santos, E. D.; Cunha, D. C.; Garcia, F. L.; Lorenzini, G.; Biserni, C.; Letzow, M.; et al. "Constructal Design of Thermal Systems". Constructal Law and the Unifying Principle of Design (2013): 295-321.
    10.1007/978-1-4614-5049-8_17
  239. Brum, Ruth da Silva; Vaz, Joaquim; Oliveira Rocha, Luiz Alberto; dos Santos, Elizaldo Domingues; Isoldi, Liercio Andre. "A new computational modeling to predict the behavior of Earth-Air Heat Exchangers". Energy and Buildings 64 (2013): 395-402.
    10.1016/j.enbuild.2013.05.032
  240. Rocha, L.A.O.; Isoldi, L.A.; De Real, M.V.; Dos Santos, E.D.; Correia, A.L.G.; Lorenzini, G.; Biserni, C.. "Constructal design applied to the elastic buckling of thin plates with holes". Central European Journal of Engineering 3 3 (2013): 475-483. http://www.scopus.com/inward/record.url?eid=2-s2.0-84921493872&partnerID=MN8TOARS.
    10.2478/s13531-013-0105-x
  241. Lorenzini, G.; Biserni, C.; Link, F.B.; Isoldi, L.A.; dos Santos, E.D.; Rocha, L.A.O.. "Constructal design of T-shaped cavity for several convective fluxes imposed at the cavity surfaces". Journal of Engineering Thermophysics 22 4 (2013): 309-321. http://www.scopus.com/inward/record.url?eid=2-s2.0-84887509639&partnerID=MN8TOARS.
    10.1134/S1810232813040048
  242. Dias, Gustavo da Cunha; Santos, Sonia Magalhães dos; Santos, Elizaldo Domingues dos; Rocha, Luiz Alberto Oliveira; Olinto, Claudio Rodrigues. "Análise teórica da influência de perfis sobre a potência de uma Turbina Wells empregada em dispositivos de conversão de energia das ondas". (2013): http://repositorio.furg.br/handle/1/4163.
  243. Seibt, Flávio Medeiros; Couto, Eduardo Costa; Teixeira, Paulo Roberto de Freitas; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Análise numérica de uma placa submersa como quebra mar e conversor de energia das ondas". (2013): http://repositorio.furg.br/handle/1/4179.
  244. Correia, Anderson Luís Garcia; Silveira, Thiago da; Silva, Caio César Cardoso da; Rocha, Luiz Alberto Oliveira; Real, Mauro de Vasconcellos; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. "Constructal design aplicado a placas com furos elípticos sob flambagem.". (2013): http://repositorio.furg.br/xmlui/handle/1/4152.
  245. Acunha Jr, Ivoni Carlos; Galarça, Marcelo Moraes; Porte, Anderson Favero; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Schneider, Paulo Smith. "Uma comparação qualitativa numérica entre condensadores evaporativos de grande e pequena escala.". (2013): http://repositorio.furg.br/handle/1/4183.
  246. Corrêa, Roberta de Lima; Rocha, Luiz Alberto Oliveira; Isoldi, Liércio André; Santos, Elizaldo Domingues dos. "Constructal design of two T-Shaped assemblies of fins cooling a cylindrical solid body". (2013): http://repositorio.furg.br/handle/1/4181.
  247. Lorenzini, G.; Rocha, L. A. O.; Biserni, C.; dos Santos, E. D.; Isoldi, L. A.. "Constructal Design of Cavities Inserted Into a Cylindrical Solid Body". Journal of Heat Transfer-Transactions of the Asme 134 7 (2012): 6-6.
    10.1115/1.4006103
  248. Lorenzini, G.; Garcia, F. L.; dos Santos, E. D.; Biserni, C.; Rocha, L. A. O.. "Constructal design applied to the optimization of complex geometries: T-Y-shaped cavities with two additional lateral intrusions cooled by convection". International Journal of Heat and Mass Transfer 55 5-6 (2012): 1505-1512.
    10.1016/j.ijheatmasstransfer.2011.10.057
  249. Rocha, L.A.O.; Real, M.V.; Correia, A.L.G.; Vaz, J.; dos Santos, E.D.; Isoldi, L.A.. "Geometric optimization based on the constructal design of perforated thin plates subject to buckling". Computational Thermal Sciences 4 2 (2012): 119-129. http://www.scopus.com/inward/record.url?eid=2-s2.0-84862290536&partnerID=MN8TOARS.
    10.1615/ComputThermalScien.2012005125
  250. Farias, Rodrigo Martins; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira. "Numerical study of reservoir cooling by means of peltier effect". (2012): http://repositorio.furg.br/handle/1/1797.
  251. Marques, Crístofer Hood; Santos, Elizaldo Domingues dos; Rocha, Luiz Alberto Oliveira. "Constructal design applied to the optimization of heat transfer in a solid conducting wall". (2012): http://repositorio.furg.br/handle/1/1802.
  252. Gomes, Mateus das Neves; Isoldi, Liércio André; Olinto, Claudio Rodrigues; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos; Souza, Jeferson Avila. "Modelagem computacional de um dispositivo do tipo coluna de água oscilante para a costa de Rio Grande". (2012): http://repositorio.furg.br/handle/1/1788.
  253. Santos, Elizaldo Domingues dos; Xavier, Carla Maria; Petry, Adriane Prisco. "Estudio numérico de flujos turbulentos isotérmicos en canales y flujos laminares con convección mixta en cavidades". (2012): https://doi.org/10.4067/S0718-07642011000100010.
    https://doi.org/10.4067/S0718-07642011000100010
  254. Santos, Sonia Magalhães dos; Pinho, Jean Monteiro de; Keller, Pablo Passos; Dias, Gustavo da Cunha; Santos, Elizaldo Domingues dos. "Aerodynamical and mechanical design of turbine blade". (2012): http://repositorio.furg.br/handle/1/1793.
  255. Gomes, Mateus das Neves; Isoldi, Liércio André; Olinto, Claudio Rodrigues; Rocha, Luiz Alberto Oliveira; Santos, Elizaldo Domingues dos; Souza, Jeferson Avila. "Modelagem computacional de um dispositivo do tipo coluna de água oscilante para a costa de Rio Grande". (2012): http://repositorio.furg.br/handle/1/1805.
  256. Lorenzini, G.; Biserni, C.; Isoldi, L. A.; dos Santos, E. D.; Rocha, L. A. O.. "Constructal Design Applied to the Geometric Optimization of Y-shaped Cavities Embedded in a Conducting Medium". Journal of Electronic Packaging 133 4 (2011):
    04100810.1115/1.4005296
  257. dos Santos, E. D.; Piccoli, G. L.; Franca, F. H. R.; Petry, A. P.. "Analysis of mixed convection in transient laminar and turbulent flows in driven cavities". International Journal of Heat and Mass Transfer 54 21-22 (2011): 4585-4595.
    10.1016/j.ijheatmasstransfer.2011.06.019
  258. Vaz, Joaquim; Sattler, Miguel A.; dos Santos, Elizaldo D.; Isoldi, Liercio A.. "Experimental and numerical analysis of an earth-air heat exchanger". Energy and Buildings 43 9 (2011): 2476-2482.
    10.1016/j.enbuild.2011.06.003
  259. Lorenzini, Giulio; Correa, Roberta Lima; dos Santos, Elizaldo Domingues; Oliveira Rocha, Luiz Alberto. "Constructal Design of Complex Assembly of Fins". Journal of Heat Transfer-Transactions of the Asme 133 8 (2011):
    08190210.1115/1.4003710
  260. Dos Santos, E.D.; Xavier, C.M.; Petry, A.P.. "Numerical study of isothermal turbulent channel flows and mixed convection laminar cavity flows,Estudio numérico de flujos turbulentos isotérmicos en canales y flujos laminares con convección mixta en cavidades". Informacion Tecnologica 22 1 (2011): 71-82. http://www.scopus.com/inward/record.url?eid=2-s2.0-79951546415&partnerID=MN8TOARS.
    10.4067/S0718-07642011002200010
  261. Elizaldo D dos Santos; Carla M Xavier; Adriane P Petry. "Estudio Numérico de Flujos Turbulentos Isotérmicos en Canales y Flujos Laminares con Convección Mixta en Cavidades". Información tecnológica 22 1 (2011): 71-82. https://doi.org/10.4067%2Fs0718-07642011000100010.
    10.4067/s0718-07642011000100010
  262. Vergara, Leandro Cavalheiro; Santos, Elizaldo Domingues dos; Rocha, Luiz Alberto Oliveira. "Thermal optimization of circular bodies submitted to an intense heat flux using constructal design". (2011): http://repositorio.furg.br/handle/1/1427.
  263. Bolzan, Claus de Rosso; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira. "Geometric optimization of bodies submitted to an intense heat flux using bifurcated channel nets". (2011): http://repositorio.furg.br/handle/1/1426.
  264. Santos, Elizaldo Domingues dos; Xavier, Carla Maria; Petry, Adriane Prisco. "Estudio numérico de flujos turbulentos isotérmicos en canales y flujos laminares con convección mixta en cavidades". (2011): https://doi.org/10.4067/S0718-07642011000100010.
    https://doi.org/10.4067/S0718-07642011000100010
Livro
  1. Estrada, E.S.D.; dos Santos, E.D.; Isoldi, L.A.; Rocha, L.A.O.. Constructal design associated with genetic algorithm to maximize the performance of H-shaped isothermal cavities. 2018.
  2. dos Santos, E.D.; Isoldi, L.A.; Gomes, M.N.; Rocha, L.A.O.. The constructal design applied to renewable energy systems. 2017.
  3. Fontoura, Jose Antonio Scotti; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Melo Filho, Eloi; Lima, Milton Luiz Paiva de; Guimarães, André Tavares da Cunha; Alves, Antonio Marcos de Lima; et al. Anais do V SEMENGO - Seminário e Workshop em Engenharia Oceânica. 2015.
  4. Lima, Milton Luiz Paiva de; Fontoura, Jose Antonio Scotti; Olinto, Cláudio Rodrigues; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. Anais do VI SEMENGO - Seminário e Workshop em Engenharia Oceânica. 2015.
  5. Lima, Milton Luiz Paiva de; Fontoura, Jose Antonio Scotti; Olinto, Cláudio Rodrigues; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. Anais do VI SEMENGO - Seminário e Workshop em Engenharia Oceânica. 2015.
  6. Fontoura, Jose Antonio Scotti; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Melo Filho, Eloi; Lima, Milton Luiz Paiva de; Guimarães, André Tavares da Cunha; Alves, Antonio Marcos de Lima; et al. Anais do V SEMENGO - Seminário e Workshop em Engenharia Oceânica. 2015.

Outros

Outra produção
  1. The Constructal Design Applied to Renewable Energy Systems. 2017. Elizaldo D. dos Santos; Liércio A. Isoldi; Mateus das N. Gomes; Luiz A. O. Rocha. https://doi.org/10.1201%2F9781315269979-4.
    10.1201/9781315269979-4
  2. Constructal design de caminhos não-uniforme de alta condutividade térmica em forma de “y” para a refrigeração de corpos geradores de calor. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-03T17:59:05Z No. of bitstreams: 1 Constructal design de caminhos não-uniforme de alta condutividade térmica em forma de “y” para a refrigeração de corpos geradores de calor.PDF: 1091129 bytes, checksum: b466d1a1c7508e4cef4987e9743ba52c (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2. 2015. Beckel, Cássia Cris; Horbach, Cristina Santos; Isoldi, Liércio André; Santos, Elizaldo Domingues dos; Rocha, Luiz Alberto Oliveira. http://repositorio.furg.br/handle/1/4994.
  3. Análise de malhas para geração numérica de ondas em tanques. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-03T18:39:50Z No. of bitstreams: 1 Análise de malhas para geração numérica de ondas em tanques.PDF: 876708 bytes, checksum: 239889a479a2db0ebbf1d4afa0c75988 (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-03T18:51:20Z (GMT) No. of bitstreams: 1 Análise de malhas para geração nu. 2015. Gomes, Mateus das Neves; Isoldi, Liércio André; Santos, Elizaldo Domingues dos; Rocha, Luiz Alberto Oliveira. http://repositorio.furg.br/handle/1/4995.
  4. Numerical simulation of an owc devise. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-08T01:38:15Z No. of bitstreams: 1 Numerical simulation of an owc devise.pdf: 502558 bytes, checksum: 8a72d821b5b9ff3d0e27c3a4cee12efd (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-08T11:26:47Z (GMT) No. of bitstreams: 1 Numerical simulation of an owc devise.pdf: 502558 bytes. 2015. Souza, Jeferson Avila; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. http://repositorio.furg.br/handle/1/5001.
  5. Constructal design of non-uniform x-shaped cavity. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-08T00:59:39Z No. of bitstreams: 1 Constructal design of non-uniform x-shaped cavity.pdf: 234761 bytes, checksum: 5508b143ec6f2b85faf41867395a8001 (MD5). Rejected by Vitor de Carvalho (vitor_carvalho_im@hotmail.com), reason: - Nome do evento na citação deve estar em caixa alta; - Falta link na citação. on 2015-06-08T11:30:27Z (GMT). 2015. Link, Fernanda Bichet; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Rocha, Luiz Alberto de Oliveira. http://repositorio.furg.br/handle/1/5006.
  6. A numerical methodology for permeability determination of reinforcements for polymeric composites. Submitted by Eliane Silva (eliane_sun@hotmail.com) on 2015-07-23T22:30:26Z No. of bitstreams: 1 A numerical methodology for permeability determination of reinforcements for polymeric composites.pdf: 266078 bytes, checksum: abb313e48ee31898db5d9b9b364b7880 (MD5). Rejected by Vitor de Carvalho (vitor_carvalho_im@hotmail.com), reason: - Nome do evento na citação deve estar em caixa alta; - Link na ci. 2015. Souza, Jeferson Avila; Isoldi, Liércio André; Santos, Elizaldo Domingues dos; Oliveira, Cristiano Peres; Amico, Sandro Campos. http://repositorio.furg.br/handle/1/5262.
  7. Numerical analysis of a regular wave over a vertical pile with a square section. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-08T17:05:52Z No. of bitstreams: 1 Numerical analysis of a regular wave over a vertical pile with a square section.pdf: 1001120 bytes, checksum: b5263d9e45425b79e7f499a9e295e6ac (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-08T19:48:55Z (GMT) No. of bitstreams: 1 Numerical an. 2015. Teixeira, Paulo Roberto de Freitas; Gomes, Mateus das Neves; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira. http://repositorio.furg.br/handle/1/5012.
  8. Constructal design of perforated steel plates subject to linear elastic and nonlinear elastoplastic buckling. Submitted by Josiane ribeiro (josiane.caic@gmail.com) on 2015-06-10T17:31:57Z No. of bitstreams: 1 CILAMCE2013-0160.PDF: 435752 bytes, checksum: dafaea07aa82d84e16242071d6062f64 (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-10T18:27:52Z (GMT) No. of bitstreams: 1 CILAMCE2013-0160.PDF: 435752 bytes, checksum: dafaea07aa82d84e16242071d6062f64. 2015. Helbig, Daniel; Real, Mauro de Vasconcellos; Correia, Anderson Luis Garcia; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. http://repositorio.furg.br/handle/1/5018.
  9. Constructal design applied to the light resin transfer molding (LRTM) manufacturing process. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-08T02:09:06Z No. of bitstreams: 1 Constructal design applied to the light resin transfer molding (LRTM) manufacturing process.pdf: 382946 bytes, checksum: 55d2fe43afa3995d5d34e2225f036d5c (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-08T11:44:34Z (GMT) No. of bitstreams: 1 C. 2015. Isoldi, Liércio André; Souza, Jeferson Avila; Santos, Elizaldo Domingues dos; Marchesini, Renato; Porto, Joseane da Silva; Letzow, Max; Rocha, Luiz Alberto de Oliveira; Amico, Sandro Campos. http://repositorio.furg.br/handle/1/5004.
  10. Large eddy simulation of turbulent forced convective flows over a pair of circular cylinders with different arrangements. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-03T18:59:43Z No. of bitstreams: 1 Large eddy simulation of turbulent forced convective flows over a pair of circular cylinders with different arrangements.pdf: 648190 bytes, checksum: b6e6500db86acbda31cb82bdd9df6d9d (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-03T19:34:28Z. 2015. Santos, Elizaldo Domingues dos; Silva, Fábio de Moraes Vaz da; Acunha Junior, Ivoni Carlos; Galarça, Marcelo Moraes; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira. http://repositorio.furg.br/handle/1/4997.
  11. Numerical study of resin distribution in two different arrangements of vascular channels by means of constructal design. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-08T01:52:48Z No. of bitstreams: 1 Numerical study of resin distribution in two different arrangements of vascular channels by means of constructal design.pdf: 202057 bytes, checksum: f04517d95b70d075edac40da0ac83a0a (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-08T11:42:15Z. 2015. Machado, Roselaine Neves; Isoldi, Liércio André; Santos, Elizaldo Domingues dos; Rocha, Luiz Alberto de Oliveira. http://repositorio.furg.br/handle/1/5003.
  12. Two-dimensional geometric optimization of an oscillating water column converter of real scale. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-08T01:25:17Z No. of bitstreams: 1 Two-dimensional geometric optimization of an oscillating water column converter of real scale.pdf: 363694 bytes, checksum: e589f5299aa91b8c915cfd0c9e03fd18 (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-08T11:39:11Z (GMT) No. of bitstreams: 1. 2015. Gomes, Mateus das Neves; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Rocha, Luiz Alberto de Oliveira. http://repositorio.furg.br/handle/1/5002.
  13. Application of the computational modeling in the resin transfer molding (RTM) process: a case study of a marine propeller. Submitted by Eliane Silva (eliane_sun@hotmail.com) on 2015-07-23T21:58:28Z No. of bitstreams: 1 Application of the computational modeling in the resin transfer molding (RTM) process a case study of a marine propeller.pdf: 269799 bytes, checksum: b275de6f3276229cf26a03e331da4bbd (MD5). Rejected by Vitor de Carvalho (vitor_carvalho_im@hotmail.com), reason: - Nome do evento na citação deve estar em c. 2015. Porto, Joseane da Silva; Letzow, Max; Santos, Elizaldo Domingues dos; Souza, Jeferson Avila; Isoldi, Liércio André; Amico, Sandro Campos. http://repositorio.furg.br/handle/1/5284.
  14. Estudo numérico de uma placa submersa vista como quebra-mar e conversor de energia das ondas. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-03T11:52:40Z No. of bitstreams: 1 Estudo numérico de uma placa submersa vista como quebra-mar e conversor de energia das ondas.pdf: 587197 bytes, checksum: 4aa6fe78197552f29e13b734d8131054 (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-03T14:37:11Z (GMT) No. of bitstreams: 1. 2015. Seibt, Flávio Medeiros; Couto, Eduardo Costa; Teixeira, Paulo Roberto de Freitas; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. http://repositorio.furg.br/handle/1/4989.
  15. Otimização geométrica de placas com enrijecedores submetidas à flexão. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-05T10:17:10Z No. of bitstreams: 1 Otimização geométrica de placas com enrijecedores submetidas à flexão.pdf: 519359 bytes, checksum: 5abbd333335610a3bdfed108c4e15123 (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-08T11:08:53Z (GMT) No. of bitstreams: 1 Otimização geométrica d. 2015. Silveira, Thiago da; Correia, Anderson Luis Garcia; Silva, Caio César Cardoso da; Rocha, Luiz Alberto de Oliveira; Real, Mauro de Vasconcellos; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. http://repositorio.furg.br/handle/1/4998.
  16. Numerical simulation and constructal theory applied for geometric optimization of thin perforated plates subject to elastic buckling. Submitted by Josiane ribeiro (josiane.caic@gmail.com) on 2015-06-10T18:01:34Z No. of bitstreams: 1 CILAMCE2013-0579.PDF: 314587 bytes, checksum: 4e6c6e42fd3186b27d63a68747ad4dde (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-10T19:02:32Z (GMT) No. of bitstreams: 1 CILAMCE2013-0579.PDF: 314587 bytes, checksum: 4e6c6e42fd3186b27d63a68747ad4dde. 2015. Correia, Anderson Luis Garcia; Helbig, Daniel; Real, Mauro de Vasconcellos; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. http://repositorio.furg.br/handle/1/5019.
  17. Numerical simulation and constructal theory applied for geometric optimization of thin perforated plates subject to elastic buckling. Submitted by Josiane ribeiro (josiane.caic@gmail.com) on 2015-06-10T18:01:34Z No. of bitstreams: 1 CILAMCE2013-0579.PDF: 314587 bytes, checksum: 4e6c6e42fd3186b27d63a68747ad4dde (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-10T19:02:32Z (GMT) No. of bitstreams: 1 CILAMCE2013-0579.PDF: 314587 bytes, checksum: 4e6c6e42fd3186b27d63a68747ad4dde. 2015. Correia, Anderson Luis Garcia; Helbig, Daniel; Real, Mauro de Vasconcellos; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. http://repositorio.furg.br/handle/1/5019.
  18. Large eddy simulation of turbulent forced convective flows over a pair of circular cylinders with different arrangements. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-03T18:59:43Z No. of bitstreams: 1 Large eddy simulation of turbulent forced convective flows over a pair of circular cylinders with different arrangements.pdf: 648190 bytes, checksum: b6e6500db86acbda31cb82bdd9df6d9d (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-03T19:34:28Z. 2015. Santos, Elizaldo Domingues dos; Silva, Fábio de Moraes Vaz da; Acunha Junior, Ivoni Carlos; Galarça, Marcelo Moraes; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira. http://repositorio.furg.br/handle/1/4997.
  19. Constructal design de caminhos não-uniforme de alta condutividade térmica em forma de “y” para a refrigeração de corpos geradores de calor. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-03T17:59:05Z No. of bitstreams: 1 Constructal design de caminhos não-uniforme de alta condutividade térmica em forma de “y” para a refrigeração de corpos geradores de calor.PDF: 1091129 bytes, checksum: b466d1a1c7508e4cef4987e9743ba52c (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2. 2015. Beckel, Cássia Cris; Horbach, Cristina Santos; Isoldi, Liércio André; Santos, Elizaldo Domingues dos; Rocha, Luiz Alberto Oliveira. http://repositorio.furg.br/handle/1/4994.
  20. Constructal design of perforated steel plates subject to linear elastic and nonlinear elastoplastic buckling. Submitted by Josiane ribeiro (josiane.caic@gmail.com) on 2015-06-10T17:31:57Z No. of bitstreams: 1 CILAMCE2013-0160.PDF: 435752 bytes, checksum: dafaea07aa82d84e16242071d6062f64 (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-10T18:27:52Z (GMT) No. of bitstreams: 1 CILAMCE2013-0160.PDF: 435752 bytes, checksum: dafaea07aa82d84e16242071d6062f64. 2015. Helbig, Daniel; Real, Mauro de Vasconcellos; Correia, Anderson Luis Garcia; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. http://repositorio.furg.br/handle/1/5018.
  21. Constructal design applied to the light resin transfer molding (LRTM) manufacturing process. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-08T02:09:06Z No. of bitstreams: 1 Constructal design applied to the light resin transfer molding (LRTM) manufacturing process.pdf: 382946 bytes, checksum: 55d2fe43afa3995d5d34e2225f036d5c (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-08T11:44:34Z (GMT) No. of bitstreams: 1 C. 2015. Isoldi, Liércio André; Souza, Jeferson Avila; Santos, Elizaldo Domingues dos; Marchesini, Renato; Porto, Joseane da Silva; Letzow, Max; Rocha, Luiz Alberto de Oliveira; Amico, Sandro Campos. http://repositorio.furg.br/handle/1/5004.
  22. Numerical simulation of an owc devise. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-08T01:38:15Z No. of bitstreams: 1 Numerical simulation of an owc devise.pdf: 502558 bytes, checksum: 8a72d821b5b9ff3d0e27c3a4cee12efd (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-08T11:26:47Z (GMT) No. of bitstreams: 1 Numerical simulation of an owc devise.pdf: 502558 bytes. 2015. Souza, Jeferson Avila; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. http://repositorio.furg.br/handle/1/5001.
  23. Application of the computational modeling in the resin transfer molding (RTM) process: a case study of a marine propeller. Submitted by Eliane Silva (eliane_sun@hotmail.com) on 2015-07-23T21:58:28Z No. of bitstreams: 1 Application of the computational modeling in the resin transfer molding (RTM) process a case study of a marine propeller.pdf: 269799 bytes, checksum: b275de6f3276229cf26a03e331da4bbd (MD5). Rejected by Vitor de Carvalho (vitor_carvalho_im@hotmail.com), reason: - Nome do evento na citação deve estar em c. 2015. Porto, Joseane da Silva; Letzow, Max; Santos, Elizaldo Domingues dos; Souza, Jeferson Avila; Isoldi, Liércio André; Amico, Sandro Campos. http://repositorio.furg.br/handle/1/5284.
  24. Numerical analysis of a regular wave over a vertical pile with a square section. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-08T17:05:52Z No. of bitstreams: 1 Numerical analysis of a regular wave over a vertical pile with a square section.pdf: 1001120 bytes, checksum: b5263d9e45425b79e7f499a9e295e6ac (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-08T19:48:55Z (GMT) No. of bitstreams: 1 Numerical an. 2015. Teixeira, Paulo Roberto de Freitas; Gomes, Mateus das Neves; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira. http://repositorio.furg.br/handle/1/5012.
  25. Two-dimensional geometric optimization of an oscillating water column converter of real scale. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-08T01:25:17Z No. of bitstreams: 1 Two-dimensional geometric optimization of an oscillating water column converter of real scale.pdf: 363694 bytes, checksum: e589f5299aa91b8c915cfd0c9e03fd18 (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-08T11:39:11Z (GMT) No. of bitstreams: 1. 2015. Gomes, Mateus das Neves; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Rocha, Luiz Alberto de Oliveira. http://repositorio.furg.br/handle/1/5002.
  26. Estudo numérico de uma placa submersa vista como quebra-mar e conversor de energia das ondas. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-03T11:52:40Z No. of bitstreams: 1 Estudo numérico de uma placa submersa vista como quebra-mar e conversor de energia das ondas.pdf: 587197 bytes, checksum: 4aa6fe78197552f29e13b734d8131054 (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-03T14:37:11Z (GMT) No. of bitstreams: 1. 2015. Seibt, Flávio Medeiros; Couto, Eduardo Costa; Teixeira, Paulo Roberto de Freitas; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. http://repositorio.furg.br/handle/1/4989.
  27. Numerical study of resin distribution in two different arrangements of vascular channels by means of constructal design. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-08T01:52:48Z No. of bitstreams: 1 Numerical study of resin distribution in two different arrangements of vascular channels by means of constructal design.pdf: 202057 bytes, checksum: f04517d95b70d075edac40da0ac83a0a (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-08T11:42:15Z. 2015. Machado, Roselaine Neves; Isoldi, Liércio André; Santos, Elizaldo Domingues dos; Rocha, Luiz Alberto de Oliveira. http://repositorio.furg.br/handle/1/5003.
  28. Otimização geométrica de placas com enrijecedores submetidas à flexão. Submitted by Eliezer Mendes Lopes (mendesfurg@gmail.com) on 2015-06-05T10:17:10Z No. of bitstreams: 1 Otimização geométrica de placas com enrijecedores submetidas à flexão.pdf: 519359 bytes, checksum: 5abbd333335610a3bdfed108c4e15123 (MD5). Approved for entry into archive by Vitor de Carvalho (vitor_carvalho_im@hotmail.com) on 2015-06-08T11:08:53Z (GMT) No. of bitstreams: 1 Otimização geométrica d. 2015. Silveira, Thiago da; Correia, Anderson Luis Garcia; Silva, Caio César Cardoso da; Rocha, Luiz Alberto de Oliveira; Real, Mauro de Vasconcellos; Santos, Elizaldo Domingues dos; Isoldi, Liércio André. http://repositorio.furg.br/handle/1/4998.
  29. A numerical methodology for permeability determination of reinforcements for polymeric composites. Submitted by Eliane Silva (eliane_sun@hotmail.com) on 2015-07-23T22:30:26Z No. of bitstreams: 1 A numerical methodology for permeability determination of reinforcements for polymeric composites.pdf: 266078 bytes, checksum: abb313e48ee31898db5d9b9b364b7880 (MD5). Rejected by Vitor de Carvalho (vitor_carvalho_im@hotmail.com), reason: - Nome do evento na citação deve estar em caixa alta; - Link na ci. 2015. Souza, Jeferson Avila; Isoldi, Liércio André; Santos, Elizaldo Domingues dos; Oliveira, Cristiano Peres; Amico, Sandro Campos. http://repositorio.furg.br/handle/1/5262.