???global.info.a_carregar???
Identificação

Identificação pessoal

Nome completo
Elsa Maria Pires Henriques

Nomes de citação

  • Henriques, Elsa

Identificadores de autor

Ciência ID
8F1F-346D-D07F
ORCID iD
0000-0002-4947-101X
Formação
Grau Classificação
2000/05/02
Concluído
 Engenharia Mecânica (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal
1994
Concluído
 Engenharia Mecânica (Mestrado integrado)
Especialização em Produção
Universidade de Lisboa Instituto Superior Técnico, Portugal
1986
Concluído
 Engenharia Mecânica (Licenciatura)
Especialização em Produção
Universidade de Lisboa Instituto Superior Técnico, Portugal
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento 		Empregador
2006 - Atual Professor Associado (Docente Universitário) Universidade de Lisboa Instituto Superior Técnico, Portugal
2000 - 2006 Professor Auxiliar (Docente Universitário) Universidade de Lisboa Instituto Superior Técnico, Portugal

Cargos e Funções

Categoria Profissional
Instituição de acolhimento 		Empregador
2019 - Atual Administração Fundação Luso-Americana, Portugal
Projetos

Projeto

Designação Financiadores
2018 - 2021 Advanced Tools for Smart Manufacturing
POCI-01-0247-FEDER-024516
Investigador responsável
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Agência Nacional de Inovação SA
Concluído
2016 - 2020 Introdução de Tecnologias Baseadas em Materiais Avançados nas Indústrias da Mobilidade
MITP-TB/PFM/0005/2013
Investigador responsável
Instituto de Engenharia Mecânica, Portugal
Concluído
2018/01/01 - 2019/01/31 Diagnostic Design and Development: Plasma Position Reflectometry (PPR)
F4E-FPA-375 (DG)
Investigador
Instituto de Plasmas e Fusão Nuclear Grupo de Lasers e Plasmas, Portugal
 Fusion for Energy
Em curso
2014/01/01 - 2019/01/31 Diagnostic Design and Development: Low Field Side Collective Thomson Scattering (LFS CTS)
F4E-FPA-373 (DG)
Investigador
Institute for Psychiatric Neuroscience, Estados Unidos
 Fusion for Energy
Em curso
2015 - 2018 Spreading Ugly Fruit Against Food Waste
FLAW4LIFE Contrato: LIFE14 ENV/PT/000817
Investigador Pós-doutorado
Universidade de Lisboa Instituto Superior Técnico, Portugal
Concluído
2009 - 2016 Design process of complex engineering systems
na
Investigador responsável
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Rolls Royce plc
Concluído
2010 - 2014 Produção Sustentável de Elevado Desempenho
FCOMP-01-0202-FEDER-013856
Investigador responsável
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Agência Nacional de Inovação SA
Concluído
2009/01/02 - 2011/01/02 Inter-cluster initiative to target the future challenges for the European polymer converting industry
ClusterPlast Contrato: 230019
Investigador responsável
Universidade de Lisboa Instituto Superior Técnico, Portugal
Concluído
2004/01/02 - 2009/01/02 SME-IP to Prepare the European Tooling Industry for the 21st Century
EuroTooling21
Investigador responsável
Universidade de Lisboa Instituto Superior Técnico, Portugal
Concluído
Produções

Publicações

Artigo em conferência
  1. Koronis, G.; Meurzec, R.W.; Silva, A.; Leite, M.; Henriques, E.; Yogiaman, C.. "Cross-cultural differences in creative ideation: A comparison between Singaporean and Portuguese students". 2019.
    10.1017/dsi.2019.12
  2. Pereira, S.; Baptista, M.; Henriques, E.M.P.. "Data-driven quality prognostics for automated riveting processes". 2018.
    10.1109/AERO.2018.8396547
  3. Marcia L. Baptista; Ivo P. de Medeiros; Joao P. Malere; Cairo L. Nascimento; Helmut Prendinger; Elsa Henriques. "Aircraft on-condition reliability assessment based on data-intensive analytics". 2017.
    10.1109/aero.2017.7943870
  4. Baptista, M.L.; De Medeiros, I.P.; Malere, J.P.; Nascimento, C.L.; Prendinger, H.; Henriques, E.. "Aircraft on-condition reliability assessment based on data-intensive analytics". 2017.
    10.1109/AERO.2017.7943870
  5. Baptista, M.; Nascimento, C.L.; Prendinger, H.; Henriques, E.. "A case for the use of data-driven methods in gas turbine prognostics". 2017.
  6. Baptista, M.; De Medeiros, I.P.; Malere, J.P.; Prendinger, H.; Nascimento, C.L.; Henriques, E.. "Improved time-based maintenance in aeronautics with regressive support vector machines". 2016.
  7. Bento, C.; Pecas, P.; Henriques, E.; Silva, A.. "Product development guided by value analysis through collaborative R&D". 2016.
  8. Henriques, E.; Pecas, P.; Silva, A.; Ribeiro, I.. "Concurrent engineering - A case study involving university and industry". 2016.
  9. Peças, P.; Götze, U.; Henriques, E.; Ribeiro, I.; Schmidt, A.; Symmank, C.. "Life Cycle Engineering - Taxonomy and State-of-the-Art". 2016.
    10.1016/j.procir.2016.04.085
  10. Silva, E.; Donauer, M.; Azevedo, A.; Pecas, P.; Henriques, E.. "A case study evaluating the impact of human behavior on a manufacturing process in-line with automatic processes by means of a simulation model". 2014.
    10.1109/IEEM.2013.6962392
  11. Viegas, J.P.L.; Vieira, S.M.; Sousa, J.M.C.; Henriques, E.M.P.. "Metaheuristics for the 3D bin packing problem in the steel industry". 2014.
    10.1109/CEC.2014.6900515
  12. Gamito, P.; Oliveira, J.; Lopes, P.; Morais, D.; Brito, R.; Cristovao, S.; Cacoete, C.; et al. "Executive functioning in addicts following health mobile cognitive stimulation Evidence from alcohol and heroin patients". 2013.
    10.4108/icst.pervasivehealth.2013.252175
  13. Fernandes, J.; Henriques, E.; Silva, A.. "A method for managing uncertainty levels in design variables during complex product development". 2013.
    10.1007/978-3-319-02812-5-9
  14. Pereira, P.; Alves, G.; Neto, V.; Ribeiro, I.; Peças, P.; Henriques, E.; Vieira, T.. "Comparative study of costs of powder steel micro manufacturing techniques in a life-cycle perspective". 2013.
  15. Baptista, A.; Santos, D.; Henriques, E.. "ToolingEDGE - High performance and sustainable production". 2013.
  16. Fernandes, J.; Silva, A.; Henriques, E.. "Modeling the impact of requirements change in the design of complex systems". 2013.
  17. Folgado, R.; Henriques, E.; Peças, P.. "Impact of workers with different task times on the performance of an asynchronous assembly line". 2013.
  18. Ribeiro, I.; Peças, P.; Henriques, E.. "Assessment of energy consumption in injection moulding process". 2012.
  19. Peças, P.; Jorge, A.; Morgado, J.; Henriques, E.; Cernadas, R.. "Collaborative approach for performance improvement of non-added value activities in SMEs". 2012.
    10.1109/ICE.2012.6297681
  20. Ribeiro, I.; Peças, P.; Henriques, E.. "Comprehensive model to evaluate the impact of tooling design decisions on the life cycle cost and environmental performance". 2012.
  21. Inácio, C.; Ribeiro, I.; Peças, P.; Henriques, E.. "Integration of life cycle engineering and multi-attribute analysis to support product development: Process design and material selection for a clothes peg". 2011.
    10.1007/978-3-642-15973-2-36
  22. Almeida, D.; Peças, P.; Ribeiro, I.; Teixeira, P.; Henriques, E.. "Application of life cycle engineering for the comparison of biodegradable polymers injection moulding performance". 2011.
    10.1007/978-3-642-19692-8-106
  23. Pepe, C.; Whitney, D.; Henriques, E.; Farndon, R.; Moss, M.. "Development of a framework for improving engineering processes". 2011.
  24. Ribeiro, I.; Peças, P.; Henriques, E.. "Life cycle approach to support tooling design decisions". 2011.
Artigo em revista
  1. Vieira, M.; Henriques, E.; Snyder, B.; Reis, L.. "Insights on the impact of structural health monitoring systems on the operation and maintenance of offshore wind support structures". Structural Safety 94 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85117854526&partnerID=MN8TOARS.
    10.1016/j.strusafe.2021.102154
  2. Baptista, Marcia Lourenco; P. Henriques, Elsa M.; Goebel, Kai. "A self-organizing map and a normalizing multi-layer perceptron approach to baselining in prognostics under dynamic regimes". Neurocomputing 456 (2021): 268-287. http://dx.doi.org/10.1016/j.neucom.2021.05.031.
    10.1016/j.neucom.2021.05.031
  3. Rechena, Diogo; Infante, Virgínia; Henriques, Elsa; Korsholm, Søren B.; Larsen, Axel W.; Gonçalves, Bruno; Vale, Alberto; Luís, Raul. "RAMI analysis of the Collective Thomson Scattering system front-end – Part2 – reliability block diagram analysis". Fusion Engineering and Design 171 (2021): 112593. http://dx.doi.org/10.1016/j.fusengdes.2021.112593.
    10.1016/j.fusengdes.2021.112593
  4. Baptista, Marcia L.; Henriques, Elsa M.P.; Prendinger, Helmut. "Classification prognostics approaches in aviation". Measurement 182 (2021): 109756. http://dx.doi.org/10.1016/j.measurement.2021.109756.
    10.1016/j.measurement.2021.109756
  5. Rechena, D.; Infante, V.; Henriques, E.; Korsholm, S.B.; Larsen, A.W.; Gonçalves, B.; Vale, A.; Luís, R.. "RAMI analysis of the collective Thomson scattering system front-end – Part1 – Failure modes effects and criticality analysis". Fusion Engineering and Design 168 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85102271148&partnerID=MN8TOARS.
    10.1016/j.fusengdes.2021.112454
  6. Baptista, M.L.; Henriques, E.M.P.; Goebel, K.. "More effective prognostics with elbow point detection and deep learning". Mechanical Systems and Signal Processing 146 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85086075089&partnerID=MN8TOARS.
    10.1016/j.ymssp.2020.106987
  7. Vieira, M.; Viana, M.; Henriques, E.; Reis, L.. "Soil interaction and grout behavior for the NREL reference monopile offshore wind turbine". Journal of Marine Science and Engineering 8 4 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85084679082&partnerID=MN8TOARS.
    10.3390/JMSE8040298
  8. Cardoso, J.; Vieira, M.; Henriques, E.; Reis, L.. "Computational analysis of the transportation phase of an innovative foundation for offshore wind turbine". Ships and Offshore Structures (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85087161449&partnerID=MN8TOARS.
    10.1080/17445302.2020.1779016
  9. Rechena, D.; Sousa, L.; Infante, V.; Henriques, E.. "Diversity minimization through part combination - A Portuguese railway infrastructure case study". Journal of Computational Design and Engineering 7 1 (2020): 86-94. http://www.scopus.com/inward/record.url?eid=2-s2.0-85101276913&partnerID=MN8TOARS.
    10.1093/JCDE/QWAA009
  10. Baptista, M.; Henriques, E.; de Medeiros, I.P.; Malere, J.P.; Nascimento, C.L.; Prendinger, H.. "Remaining useful life estimation in aeronautics: Combining data-driven and Kalman filtering". Reliability Engineering and System Safety 184 (2019): 228-239. http://www.scopus.com/inward/record.url?eid=2-s2.0-85042388055&partnerID=MN8TOARS.
    10.1016/j.ress.2018.01.017
  11. Gaspar, J.; Fontul, M.; Henriques, E.; Silva, A.. "Push button design requirements and relations to button architecture elements". International Journal of Industrial Ergonomics 70 (2019): 92-106. http://www.scopus.com/inward/record.url?eid=2-s2.0-85061203645&partnerID=MN8TOARS.
    10.1016/j.ergon.2019.01.001
  12. Ribeiro, I.; Kaufmann, J.; Götze, U.; Peças, P.; Henriques, E.. "Fibre reinforced polymers in the sports industry–Life Cycle Engineering methodology applied to a snowboard using anisotropic layer design". International Journal of Sustainable Engineering 12 3 (2019): 201-211. http://www.scopus.com/inward/record.url?eid=2-s2.0-85052152935&partnerID=MN8TOARS.
    10.1080/19397038.2018.1508318
  13. Soares, B.A.R.; Henriques, E.; Ribeiro, I.; Freitas, M.. "Cost analysis of alternative automated technologies for composite parts production". International Journal of Production Research 57 6 (2019): 1797-1810. http://www.scopus.com/inward/record.url?eid=2-s2.0-85052089411&partnerID=MN8TOARS.
    10.1080/00207543.2018.1508903
  14. Vieira, M.; Snyder, B.; Henriques, E.; Reis, L.. "European offshore wind capital cost trends up to 2020". Energy Policy (2019): 1364-1371. http://www.scopus.com/inward/record.url?eid=2-s2.0-85063480737&partnerID=MN8TOARS.
    10.1016/j.enpol.2019.03.036
  15. Vieira, M.; Henriques, E.; Amaral, M.; Arantes-Oliveira, N.; Reis, L.. "Path discussion for offshore wind in Portugal up to 2030". Marine Policy 100 (2019): 122-131. http://www.scopus.com/inward/record.url?eid=2-s2.0-85057221370&partnerID=MN8TOARS.
    10.1016/j.marpol.2018.11.021
  16. Vieira, M.; Maciel, G.; Henriques, E.; Reis, L.. "A new proposal for an offshore wind foundation for transitional waters". Marine Structures 68 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85070810276&partnerID=MN8TOARS.
    10.1016/j.marstruc.2019.102657
  17. Valverde, N.; Ribeiro, A.M.R.; Henriques, E.; Fontul, M.. "An engineering perspective on the quality of the automotive push-buttons’ haptic feedback in optimal and suboptimal interactions". Journal of Engineering Design 30 8-9 (2019): 336-367. http://www.scopus.com/inward/record.url?eid=2-s2.0-85071164732&partnerID=MN8TOARS.
    10.1080/09544828.2019.1656802
  18. Larsen, A.W.; Korsholm, S.B.; Gonçalves, B.; Gutierrez, H.E.; Henriques, E.; Infante, V.; Jensen, T.; et al. "Mitigation of EC breakdown in the gyrotron transmission line of the ITER Collective Thomson Scattering diagnostic via a Split Biased Waveguide". Journal of Instrumentation 14 11 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85082739893&partnerID=MN8TOARS.
    10.1088/1748-0221/14/11/C11009
  19. Nuno Valverde; Relógio Ribeiro; Elsa Henriques; Mihail Fontul. "Psychoacoustic metrics for assessing the quality of automotive HMIs’ impulsive sounds". Applied Acoustics 137 (2018): 108-120. https://doi.org/10.1016%2Fj.apacoust.2018.03.007.
    10.1016/j.apacoust.2018.03.007
  20. Anes, V.; Henriques, E.; Freitas, M.; Reis, L.. "A new risk prioritization model for failure mode and effects analysis". Quality and Reliability Engineering International (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85040664703&partnerID=MN8TOARS.
    10.1002/qre.2269
  21. Baptista, M.; Sankararaman, S.; de Medeiros, I.P.; Nascimento, C.; Prendinger, H.; Henriques, E.M.P.. "Forecasting fault events for predictive maintenance using data-driven techniques and ARMA modeling". Computers and Industrial Engineering 115 (2018): 41-53. http://www.scopus.com/inward/record.url?eid=2-s2.0-85033439625&partnerID=MN8TOARS.
    10.1016/j.cie.2017.10.033
  22. Ribeiro, I.; Sobral, P.; Peças, P.; Henriques, E.. "A sustainable business model to fight food waste". Journal of Cleaner Production 177 (2018): 262-275. http://www.scopus.com/inward/record.url?eid=2-s2.0-85041105772&partnerID=MN8TOARS.
    10.1016/j.jclepro.2017.12.200
  23. Marques, P.C.; Silva, A.; Henriques, E.. "Integrating innovation and technology: A case study". International Journal of Systematic Innovation 5 2 (2018): 25-34. http://www.scopus.com/inward/record.url?eid=2-s2.0-85058237504&partnerID=MN8TOARS.
  24. José Gaspar; Mihail Fontul; Elsa Henriques; Arlindo Silva. "Haptics of in-car radio buttons and its relationship with engineering parameters". International Journal of Industrial Ergonomics 59 (2017): 29-45. https://doi.org/10.1016%2Fj.ergon.2017.03.005.
    10.1016/j.ergon.2017.03.005
  25. U. Götze; P. Peças; A. Schmidt; C. Symmank; E. Henriques; I. Ribeiro; M. Schüller. "Life Cycle Engineering and Management – Fostering the Management-orientation of Life Cycle Engineering Activities". Procedia CIRP 61 (2017): 134-139. https://doi.org/10.1016%2Fj.procir.2016.11.240.
    10.1016/j.procir.2016.11.240
  26. Fernandes, Joao Ventura; Henriques, Elsa; Silva, Arlindo; Pimentel, Cesar. "Modelling the dynamics of complex early design processes: anagent-based approach". Design Science 3 (2017): http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000413969200001&KeyUID=WOS:000413969200001.
    10.1017/dsj.2017.17
  27. Infante, V.; Henriques, E.; Gonçalves, B.; Korsholm, S.B.; Leipold, F.; Gutierrez, H.E.; Jensen, T.; et al. "RAMI analysis of the ITER LFS CTS system". Fusion Engineering and Design 123 (2017): 663-668. http://www.scopus.com/inward/record.url?eid=2-s2.0-85019108126&partnerID=MN8TOARS.
    10.1016/j.fusengdes.2017.05.001
  28. Baptista, M.; de Medeiros, I.P.; Malere, J.P.; Nascimento, C.; Prendinger, H.; Henriques, E.M.P.. "Comparative case study of life usage and data-driven prognostics techniques using aircraft fault messages". Computers in Industry 86 (2017): 1-14. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009371877&partnerID=MN8TOARS.
    10.1016/j.compind.2016.12.008
  29. Carmona Marques, P.; Silva, Arlindo; Henriques, Elsa; Gomes, JFS; Meguid, SA. "INNOVATION AND TECHNOLOGY IN COMPANIES: A CASE STUDY". Irf2016: 5th International Conference Integrity-Reliability-Failure (2016): 693-694. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000388368100110&KeyUID=WOS:000388368100110.
  30. Anes, V.; Pedro, R.; Henriques, E.; Freitas, M.; Reis, L.. "Bonded joints of dissimilar adherends at very low temperatures - An adhesive selection approach". Theoretical and Applied Fracture Mechanics 85 (2016): 99-112. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000386322400012&KeyUID=WOS:000386322400012.
    10.1016/j.tafmec.2016.08.012
  31. Loyer, J.-L.; Henriques, E.; Fontul, M.; Wiseall, S.. "Comparison of Machine Learning methods applied to the estimation of manufacturing cost of jet engine components". International Journal of Production Economics 178 (2016): 109-119. http://www.scopus.com/inward/record.url?eid=2-s2.0-84970021774&partnerID=MN8TOARS.
    10.1016/j.ijpe.2016.05.006
  32. Hugo Carvalho; Ana Raposo; Inês Ribeiro; Jörg Kaufmann; Uwe Götze; Paulo Peças; Elsa Henriques. "Application of Life Cycle Engineering Approach to Assess the Pertinence of Using Natural Fibers in Composites – The Rocker Case Study". Procedia CIRP 48 (2016): 364-369. http://dx.doi.org/10.1016/j.procir.2016.03.144.
    10.1016/j.procir.2016.03.144
  33. Ribeiro, I.; Kaufmann, J.; Schmidt, A.; Peças, P.; Henriques, E.; Götze, U.. "Fostering selection of sustainable manufacturing technologies - A case study involving product design, supply chain and life cycle performance". Journal of Cleaner Production 112 (2016): 3306-3319. http://www.scopus.com/inward/record.url?eid=2-s2.0-84958109848&partnerID=MN8TOARS.
    10.1016/j.jclepro.2015.10.043
  34. Viegas, J.L.; Vieira, S.M.; Henriques, E.M.P.; Sousa, J.M.C.. "Heuristics for three-dimensional steel cutting with usable leftovers considering large time periods". European Journal of Industrial Engineering 10 4 (2016): 431-454. http://www.scopus.com/inward/record.url?eid=2-s2.0-84981516015&partnerID=MN8TOARS.
    10.1504/EJIE.2016.078141
  35. Gaspar, J.; Fontul, M.; Henriques, E.; Ribeiro, A.; Silva, A.; Valverde, N.. "Psychoacoustics of in-car switch buttons: From feelings to engineering parameters". Applied Acoustics 110 (2016): 280-296. http://www.scopus.com/inward/record.url?eid=2-s2.0-84963972211&partnerID=MN8TOARS.
    10.1016/j.apacoust.2016.03.037
  36. Ribeiro, I.; Peças, P.; Henriques, E.. "Modelling the energy consumption in the injection moulding process". International Journal of Sustainable Manufacturing 3 4 (2015): 289-309. http://www.scopus.com/inward/record.url?eid=2-s2.0-84953286564&partnerID=MN8TOARS.
    10.1504/IJSM.2015.073815
  37. Leite, M.; Silva, A.; Henriques, E.; A. Madeira, J.F.. "Materials selection for a set of multiple parts considering manufacturing costs and weight reduction with structural isoperformance using direct multisearch optimization". Structural and Multidisciplinary Optimization 52 4 (2015): 635-644. http://www.scopus.com/inward/record.url?eid=2-s2.0-84943365061&partnerID=MN8TOARS.
    10.1007/s00158-015-1247-7
  38. Folgado, R.; Peças, P.; Henriques, E.. "Mapping workers' performance to analyse workers heterogeneity under different workflow policies". Journal of Manufacturing Systems 36 (2015): 27-34. http://www.scopus.com/inward/record.url?eid=2-s2.0-84929999575&partnerID=MN8TOARS.
    10.1016/j.jmsy.2015.03.002
  39. Jean-Loup Loyer; Elsa Henriques. "2.3.1 A MBSE probabilistic framework for preliminary lifecycle costing of mechanical products". INCOSE International Symposium 24 1 (2014): 182-195. http://dx.doi.org/10.1002/j.2334-5837.2014.tb03143.x.
    10.1002/j.2334-5837.2014.tb03143.x
  40. João Fernandes; Elsa Henriques; Arlindo Silva; Michael A. Moss. "A method for imprecision management in complex product development". Res Eng Design (2014): http://dx.doi.org/10.1007/s00163-014-0178-4.
    10.1007/s00163-014-0178-4
  41. Arlindo Silva; Mihail Fontul; Elsa Henriques. "Teaching design in the first years of a traditional mechanical engineering degree: methods, issues and future perspectives". European Journal of Engineering Education (2014): 1-13. http://dx.doi.org/10.1080/03043797.2014.903227.
    10.1080/03043797.2014.903227
  42. Pedro D.B. Carmona Marques; Arlindo José P.F. Silva; Elsa M.P. Henriques; Christopher L. Magee. "A descriptive framework of the design process from a dual cognitive-engineering perspective". International Journal of Design Creativity and Innovation 2 3 (2014): 142-164. http://dx.doi.org/10.1080/21650349.2013.877632.
    10.1080/21650349.2013.877632
  43. Almeida, S.M.; Silva, A.V.; Garcia, S.; Henriques, E.; Miranda, M.A.. "Traffic-related air pollution in an industrial area". WIT Transactions on Ecology and the Environment 181 (2014): 683-694. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903176403&partnerID=MN8TOARS.
    10.2495/EID140581
  44. Paulo Peças; Inês Ribeiro; Elsa Henriques. "Life Cycle Engineering for Materials and Technology Selection: Two Models, One Approach". Procedia CIRP 15 (2014): 543-548. http://dx.doi.org/10.1016/j.procir.2014.06.073.
    10.1016/j.procir.2014.06.073
  45. Fernandes, J.; Henriques, E.; Silva, A.; Moss, M.A.. "Requirements change in complex technical systems: an empirical study of root causes". Research in Engineering Design 26 1 (2014): 37-55. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920251842&partnerID=MN8TOARS.
    10.1007/s00163-014-0183-7
  46. Gaspar, J.; Fontul, M.; Henriques, E.; Silva, A.. "User satisfaction modeling framework for automotive audio interfaces". International Journal of Industrial Ergonomics 44 5 (2014): 662-674. http://www.scopus.com/inward/record.url?eid=2-s2.0-84906769290&partnerID=MN8TOARS.
    10.1016/j.ergon.2014.07.009
  47. Paulo Peças; Raquel Folgado; Elsa Henriques. "Pragmatic Approach for Assembly Lines Selection Based on Discrete-Event Simulation". Journal for Manufacturing Science & Production 13 3 (2013): http://dx.doi.org/10.1515/jmsp-2013-0008.
    10.1515/jmsp-2013-0008
  48. Ribeiro, I.; Peças, P.; Henriques, E.. "Incorporating tool design into a comprehensive life cycle cost framework using the case of injection molding". Journal of Cleaner Production 53 (2013): 297-309. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878950266&partnerID=MN8TOARS.
    10.1016/j.jclepro.2013.04.025
  49. Ribeiro, I.; Peças, P.; Henriques, E.. "A life cycle framework to support materials selection for Ecodesign: A case study on biodegradable polymers". Materials and Design 51 (2013): 300-308. http://www.scopus.com/inward/record.url?eid=2-s2.0-84877833145&partnerID=MN8TOARS.
    10.1016/j.matdes.2013.04.043
  50. Peças, P.; Ribeiro, I.; Silva, A.; Henriques, E.. "Comprehensive approach for informed life cycle-based materials selection". Materials and Design 43 (2013): 220-232. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864370699&partnerID=MN8TOARS.
    10.1016/j.matdes.2012.06.064
  51. Leite, M.; Madeira, J.F.A.; Silva, A.; Henriques, E.; Roth, R.. "Optimization of materials selection in a multi-part environment with direct multi-search". Civil-Comp Proceedings 99 (2012): http://www.scopus.com/inward/record.url?eid=2-s2.0-84893936924&partnerID=MN8TOARS.
  52. Marques, Pedro; Silva, Arlindo; Henriques, Elsa; Magee, Christopher; SilvaGomes, JF; Vaz, MAP. "MODELLING CREATIVITY IN PRODUCT DEVELOPMENT: EMPIRICAL FINDINGS AT THE FRONT-END DESIGN". Icem15: 15th International Conference on Experimental Mechanics (2012): http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000320722901126&KeyUID=WOS:000320722901126.
  53. Leite, M.; Madeira, J.F.A.; Silva, A.; Henriques, E.; Roth, R.. "Optimization of materials selection in a multi-part environment with direct multi-search". Civil-Comp Proceedings 99 (2012): http://www.scopus.com/inward/record.url?eid=2-s2.0-84893936924&partnerID=MN8TOARS.
  54. Folgado, R.; Pecas, P.; Henriques, E.. "Folgado, R., Pecas, P., Henriques, E., 2010. Life cycle cost for technology selection: A case study in the manufacturing of injection moulds (vol 128, pg 368, 2010)". International Journal of Production Economics 129 2 (2011): 347-347. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000286704400012&KeyUID=WOS:000286704400012.
    10.1016/j.ijpe.2010.10.027
  55. Peças, P.; Ribeiro, I.; Folgado, R.; Henriques, E.. "Erratum: A Life Cycle Engineering model for technology selection: A case study on plastic injection moulds for low production volumes (Journal of Cleaner Production (2009) 17: 9 (846-856))". Journal of Cleaner Production 19 4 (2011): http://www.scopus.com/inward/record.url?eid=2-s2.0-78751512225&partnerID=MN8TOARS.
    10.1016/j.jclepro.2010.12.019
  56. Ratinho, Tiago; Henriques, Elsa. "The role of science parks and business incubators in converging countries: Evidence from Portugal". Technovation 30 4 (2010): 278-290. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000276340200006&KeyUID=WOS:000276340200006.
    10.1016/j.technovation.2009.09.002
  57. Folgado, R.; Pecas, P.; Henriques, E.. "Life cycle cost for technology selection: A Case study in the manufacturing of injection moulds". International Journal of Production Economics 128 1 (2010): 368-378. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000284134600037&KeyUID=WOS:000284134600037.
    10.1016/j.ijpe.2010.07.036
  58. Pecas, P.; Henriques, E.. "Intrinsic innovations of die sinking electrical discharge machining technology: estimation of its impact". International Journal of Advanced Manufacturing Technology 44 9-10 (2009): 880-889. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000269881500005&KeyUID=WOS:000269881500005.
    10.1007/s00170-008-1902-x
  59. Pecas, P.; Ribeiro, I.; Folgado, R.; Henriques, E.. "A Life Cycle Engineering model for technology selection: a case study on plastic injection moulds for low production volumes". Journal of Cleaner Production 17 9 (2009): 846-856. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000266177000008&KeyUID=WOS:000266177000008.
    10.1016/j.jclepro.2009.01.001
  60. Silva, A.; Henriques, E.; Carvalho, A.. "Creativity enhancement in a product development course through entrepreneurship learning and intellectual property awareness". European Journal of Engineering Education 34 1 (2009): 63-75. http://www.scopus.com/inward/record.url?eid=2-s2.0-67650606833&partnerID=MN8TOARS.
    10.1080/03043790802710201
  61. Pecas, P.; Henriques, E.. "Electrical discharge machining using simple and powder-mixed dielectric: The effect of the electrode area in the surface roughness and topography". Journal of Materials Processing Technology 200 1-3 (2008): 250-258. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000254814100026&KeyUID=WOS:000254814100026.
    10.1016/j.jmatprotec.2007.09.051
  62. Ribeiro, Ines; Pecas, Paulo; Silva, Arlindo; Henriques, Elsa. "Life cycle engineering methodology applied to material selection, a fender case study". Journal of Cleaner Production 16 17 (2008): 1887-1899. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000260197100007&KeyUID=WOS:000260197100007.
    10.1016/j.jclepro.2008.01.002
  63. Pecas, Paulo; Henriques, Elsa. "Effect of the powder concentration and dielectric flow in the surface morphology in electrical discharge machining with powder-mixed dielectric (PMD-EDM)". International Journal of Advanced Manufacturing Technology 37 11-12 (2008): 1120-1132. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000256765100008&KeyUID=WOS:000256765100008.
    10.1007/s00170-007-1061-5
  64. Henriques, E.. "Towards the integration of process and production planning: an optimisation model for cutting parameters". International Journal of Advanced Manufacturing Technology 28 1-2 (2006): 117-128. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000235738900015&KeyUID=WOS:000235738900015.
    10.1007/s00170-004-2329-7
  65. Peças, P.; Henriques, E.. "Best practices of collaboration between university and industrial SMEs". Benchmarking 13 1-2 (2006): 54-67. http://www.scopus.com/inward/record.url?eid=2-s2.0-33644521318&partnerID=MN8TOARS.
    10.1108/14635770610644574
  66. Cunha, P.; Dionisio, J.; Henriques, E.. "An architecture to support the manufacturing system design and planning". International Journal of Computer Integrated Manufacturing 16 7-8 (2003): 605-612. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000184919900019&KeyUID=WOS:000184919900019.
    10.1080/0951192031000115660
  67. Pecas, P.; Henriques, E.. "Influence of silicon powder-mixed dielectric on conventional electrical discharge machining". International Journal of Machine Tools & Manufacture 43 14 (2003): 1465-1471. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000185910500007&KeyUID=WOS:000185910500007.
    10.1016/s0890-6955(03)00169-x
  68. Peças, P.; Henriques, E.. "Influence of silicon powder-mixed dielectric on conventional electrical discharge machining". International Journal of Machine Tools and Manufacture 43 14 (2003): 1465-1471. http://www.scopus.com/inward/record.url?eid=2-s2.0-0141458164&partnerID=MN8TOARS.
    10.1016/S0890-6955(03)00169-X
Capítulo de livro
  1. Ferreira, I.; Machado, M.; Henriques, E.; Leite, M.; Peças, P.; Marques, A.T.. "State-of-the-Art Review and Roadmap". 1-56. 2020.
    10.1007/978-3-030-44522-5_1
  2. Peças, P.; Ribeiro, I.; Carvalho, H.; Silva, A.; Salman, H.M.; Henriques, E.. "Ramie and jute as natural fibers in a composite part-a life cycle engineering comparison with an aluminum part". 253-284. 2018.
  3. Peças, P.; Ribeiro, I.; Henriques, E.; Raposo, A.. "Additive manufacturing in injection molds-life cycle engineering for technology selection". 105-139. 2018.
  4. Carvalho, H.; Raposo, A.; Ribeiro, I.; Peças, P.; Silva, A.; Henriques, E.. "Influence of the use of natural fibers in composite materials assessed on a life cycle perspective". 377-398. 2017.
  5. Anes, V.; Pedro, R. S.; Henriques, E.; Freitas, M.; Reis, L.; Iacoviello, F; Reis, L; et al. "Galvanic corrosion of aircraft bonded joints as a result of adhesive microcracks". 218-225. 2016.
    10.1016/j.prostr.2016.02.030
  6. Fernandes, Joao; Henriques, Elsa; Silva, Arlindo; Pimentel, Cesar; Weber, C; Husung, S; Cantamessa, M; et al. "AN AGENT-BASED APPROACH TO SUPPORT PLANNING FOR CHANGE DURING EARLY DESIGN". 2015.
  7. Ribeiro, I.; Peças, P.; Henriques, E.. "Life cycle engineering applied to material selection". 87-116. 2009.
  8. Henriques, E. P.; Mesquita, R. M. D.. "An integrated model for cutting parameters optimization and shop-floor scheduling". editado por Kuljanic, E., 223-230. 1999.
Livro
  1. Anes, V.; Reis, L.; Henriques, E.; Abreu, A.. A Risk Assessment Model for Decision Making in Innovation Projects. 2020.
    10.1007/978-3-030-45124-0_7
  2. Viegas, J.L.; Vieira, S.M.; Henriques, E.M.P.; Sousa, J.M.C.. A tabu search algorithm for the 3D bin packing problem in the steel industry. 2015.
    10.1007/978-3-319-10380-8_34
  3. Elsa Henriques; Paulo Pecas; Arlindo Silva. Technology and Manufacturing Process Selection. Springer London. 2014.
    10.1007/978-1-4471-5544-7
  4. Teixeira, P.; Pontes, A.; Henriques, E.. Effect of the injection moulding processing conditions on biopolymers final properties. 2013.
    10.4028/www.scientific.net/MSF.730-732.20
  5. Morgado, J.; Peças, P.; Jorge, A.; Henriques, E.; Cernadas, R.; Furtado, S.. Setup performance indicators: A tool to systematize and standardize the setup process diagnosis. 2013.
    10.1007/978-3-319-00557-7_116
  6. Costa, A.; Henriques, E.; Domingues, M.; Peças, P.. Value stream mapping application on mould making industry: Results and discussion. 2013.
    10.1007/978-3-319-00557-7_126
  7. Folgado, R.; Peças, P.; Henriques, E.. Performance heterogeneity within a group: An empirical study. 2013.
    10.1007/978-3-319-00557-7_77
  8. Peças, P.; Henriques, E.; Ribeiro, I.. Integrated approach to product and process design based on life cycle engineering. 2010.
    10.4018/978-1-61520-617-9.ch021
  9. Ribeiro, Ines; Pecas, Paulo; Henriques, Elsa. The need for a life cycle approach on the material selection: a case study of an automobile fender. 2008.
  10. Mesquita, R.; Henriques, E.; Ferreira, P. S.; Pinto, P.. Architecture of an integrated process planning and tool management system. 1996.
  11. Mesquita, R. M. D.; Henriques, E. P.. MODELING AND OPTIMIZATION OF TURNING OPERATIONS. 1993.

Outros

Outra produção
  1. Influence of the Use of Natural Fibers in Composite Materials Assessed on a Life Cycle Perspective. 2017. Hugo Carvalho; Ana Raposo; Inês Ribeiro; Paulo Peças; Arlindo Silva; Elsa Henriques. https://doi.org/10.1002%2F9781119441632.ch118.
    10.1002/9781119441632.ch118
  2. Perspectives Of Mould Making Industry For Digital Global Manufacturing. 2007. Elsa Henriques; Paulo Peças; Pedro Filipe Cunha. http://dx.doi.org/10.1007/978-0-387-49864-5_53.
    10.1007/978-0-387-49864-5_53
Atividades

Orientação

Título / Tema
Papel desempenhado 		Curso (Tipo)
Instituição / Organização
2016/01/02 - Atual Understanding technological change in Advanced Composite Manufacturing Technologies for the aerospace industry: A patent based approach
Orientador
 Líderes para Indústrias Tecnológicas/ Engineering Design and Advanced Manufacturing (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/01/02 - 2021/01/02 Análise e melhoria do processo de aluguer de equipamentos do Grupo Vendap.
Coorientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/01/02 - 2020/01/02 Automatic cost estimation of aerospace composites components based on retrieved knowledge from historic process data.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/01/02 - 2020/01/01 Viability of Structural Health Monitoring Systems on the Support Structures of Offshore Wind
Coorientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/01/02 - 2019/01/02 Realocação de Componentes em Stock com base na Análise de Dados Históricos de Procura: um Caso de Estudo na Portugália Airlines. Mestrado em nstituto Superior Técnico, 2019.
Orientador
 Engenharia Mecânica (Mestrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/01/02 - 2019/01/02 Prognostic and Risk of Failure Events Using Machine Learning: An Analysis based on Onboard Aircraft Messages.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/01/02 - 2019/01/02 Prognostic and Risk of Failure Events Using Machine Learning: An Analysis based on Onboard Aircraft Messages.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/01/02 - 2019/01/02 Modelling Costs of Composite Based Technologies in Different Stages of Maturation.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014/01/02 - 2019/01/02 A New Risk Base Approach for Project Selection.
Coorientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014/01/02 - 2018/01/02 Machine Learning and Deep Learning for Prognostics and Predictive Maintenance of Aeronautical Equipment Aircraft.
Orientador de Márcia Lourenço Baptista
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018 - 2018 Reliability and Availability Simulation Model of Complex Systems.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018 - 2018 Implementação da Manutenção Produtiva Total - Caso de estudo Riberalves.
Orientador
 Engenharia e Gestão Industrial (Mestrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018 - 2018 Análise ao histórico de equipamentos, desenvolvimento de classificações de falhas com base em abordagens AMFE.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - 2018 Restruturação da Supply Chain reduzindo dias de stock, garantindo disponibilidade de produto e sustentando vendas - Caso de estudo AKI.
Coorientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2012/01/02 - 2017/01/02 A Contribution to Statistical Modelling of Lifecycle Cost of Jet Engines.
Coorientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - 2017 Data-Driven Quality Prognostics for Automated Riveting Process.
Orientador
 Engenharia Aeroespacial (Mestrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - 2017 Demand Forecast and Stock Control for Service Level of Spare Components: a Case Study at Portugália Airlines.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - 2017 Availability Simulation Model of a Complex System: a Contribution for the RAMI analysis of the ITER LFS CTS System.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - 2017 Methodology for Product Development Process Structuring and Improvement.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - 2017 Industrie 4.0 in Volkswagen Autoeuropa: Study of the Effects of Industrie 4.0 in the launching process of a new model.
Orientador
 Engenharia Mecânica (Mestrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - 2017 Ferramentas Lean na Melhoria da Eficiência em Manutenção: Um Caso de Estudo na Indústria Aeronáutica.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2011/01/02 - 2015/01/02 Requirements Change in Complex Product Development: Understanding Causes, Managing Uncertainty and Planning for Change.
Orientador
Universidade de Lisboa Instituto Superior Técnico Campus Taguspark, Portugal
2010/01/02 - 2015/01/02 An Approach to Identify the Appropriate Design Requirements and Specifications to Define the Target Percept of an in-Car Interface: Case of Non-Visual Senses.
Coorientador
Universidade de Lisboa Instituto Superior Técnico Campus Taguspark, Portugal
2010/01/02 - 2014/01/02 A Contribution to Understand ill-defined Requirements of In-car Interfaces.
Coorientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2008/01/02 - 2013/01/02 Heterogeneity and Variability on Human-Centered Assembly Systems.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2008/01/02 - 2012/01/02 A Framework to Analyse and Improve Engineering Processes.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2008/01/02 - 2012/01/02 A Comprehensive Life Cycle Framework Integrating Part and Tool Design.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2008/01/02 - 2012/01/02 Techno Economic Evaluation in Materials Selection for Multiple Parts Under OEM-Tier Relations.
Coorientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2008/01/02 - 2012/01/02 Creativity in Product Development, A Contribution to the Understanding of Front-end Design.
Coorientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2006/01/02 - 2011/01/02 Potenciar a Inovação em PMEs Industriais de Baixa Incorporação Tecnológica: uma Abordagem de Caso de Estudo.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2006/01/02 - 2007/01/02 Produção Magra em Pequenas e Médias Empresas - Diagnóstico a Uma Unidade Produtiva e Desenvolvimento de Soluções.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2000/01/02 - 2004/01/02 Estudo do Polimento por Electro-Erosão e do seu Potencial de Exploração no Fabrico de Moldes de Injecção de Plástico.
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal

Comissão de avaliação

Descrição da atividade
Tipo de assessoria 		Instituição / Organização Entidade financiadora
2015 - 2022 Comissão Científica do programa doutoral Líderes para Indústrias Tecnológicas do Instituto Superior Técnico, no âmbito da área Engineering Design and Advanced Manufacturing da iniciativa MIT Portugal
Membro
 Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/01/02 - 2018/01/02 Comissão de avaliação externa nomeada pela Agência de Avaliação e Acreditação do Ensino Superior (A3ES) para avaliação do programa doutoral “Desenvolvimento de Produto Tecnológico” proposto pela Atlântica - Escola Universitária de Ciências Empresariais, Saúde, Tecnologias e Engenharia, 2018.
Avaliador
 Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - 2018 Membro do painel de Engenharia Mecânica de avaliação do concurso de bolsas de doutoramento financiadas pela Fundação da Ciência e Tecnologia, Concurso de Bolsas individuais.
Avaliador
 Universidade de Lisboa Instituto Superior Técnico, Portugal

Curso / Disciplina lecionado

Disciplina Curso (Tipo) Instituição / Organização
2007 - 2020 Responsável pela unidade curricular de Production Management / Gestão de Sistemas de Fabrico (programa doutoral ), desde 2007 (10 – 20 alunos). (Doutoramento) Universidade de Lisboa Instituto Superior Técnico, Portugal
2007 - 2019 Responsável pela unidade curricular Empreendedorismo, Inovação e Gestão de Tecnologia (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal