???global.info.a_carregar???
Durante o percurso académico, o desenvolvimento de trabalhos de manutenção na deteção de fendas por fadiga em equipamentos mecânicos, no sólido grupo Portucel hoje Grupo Navigator, incrementou ainda mais o meu fascínio pela área de Projeto Mecânico. Em setembro de 2010 concluí o Mestrado Integrado em Engenharia Mecânica, Área de Especialização: Produção e Projeto na Faculdade de Ciências e Tecnologia. Onde em janeiro de 2011 seira escolhido como bolseiro de investigação no projeto FCT “Melhoria da resistência à fadiga através do processamento por ficção linear em juntas de alumínio soldadas por MIG” o que, mais tarde, me incentivaria a cursar o Doutoramento em Engenharia Mecânica na Especialização Científica de Integridade Estrutural, o qual concluí em janeiro de 2019. Depois de adquirir experiência científica e competência técnica seria convidado para lecionar diferentes disciplinas na área de Projeto Mecânico e Tecnologia Mecânica na Faculdade de Ciências e Tecnologia da Universidade de Coimbra, assim como, em diversas instituições de ensino superior sempre participando em simultâneo em projetos científicos nas áreas de projeto mecânico e tecnologia mecânica. Ao longo do tempo de estudo e trabalho científico foi possível participar em conferências nacionais e internacionais, assim como, publicar os trabalhos desenvolvidos em revistas internacionais de alto impacto na área de Engenharia Mecânica, sendo que estes fatos continuam no presente. Atualmente, o trabalho ao qual me dedico é o estudo de propagação de fendas por fadiga, fadiga oligocíclica, fratura, propagação de fendas em ambientes corrosivos, algumas propriedades estáticas e estudos metalográficos de componentes obtidos por fusão seletiva por laser. Posto este pequeno resumo, de seguida poderá ser consultado em detalhe o meu percurso académico e profissional onde se evidenciam as minhas excelentes competências em Engenharia Mecânica nomeadamente nas áreas de Projeto Mecânico e Tecnologia Mecânica. Por outro lado, também evidencia o meu fascínio e paixão, pela transmissão de conhecimentos às novas gerações, assim como, pela investigação e desenvolvimento.
Identificação

Identificação pessoal

Nome completo
Joel Alexandre da Silva de Jesus

Nomes de citação

  • J.S. Jesus

Identificadores de autor

Ciência ID
6B14-D6FA-8E48
ORCID iD
0000-0002-7133-2331

Endereços de correio eletrónico

  • joel.jesus@uc.pt (Profissional)

Telefones

Telemóvel
  • (+351) 919900740 (Pessoal)

Moradas

  • Rua Principal N91, 3840-557, Sanchequias, Vagos , Portugal (Pessoal)

Websites

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica - Engenharia Mecânica

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Português (Idioma materno)
Espanhol; Castelhano (Idioma materno)
Inglês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Formação
Grau Classificação
2019
Concluído
Doutoramento em Engenharia Mecânica (Doutoramento)
Especialização em Integridade Estrutural
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"Processamento por Fricção Linear: uma técnica de melhoria da resistência à fadiga de juntas soldadas" (TESE/DISSERTAÇÃO)
2010
Concluído
Ciências da Engenharia Mecânica (Mestrado)
Especialização em Produção e Projeto
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento
Empregador
2016 - 2017 Assistente Convidado (Docente Universitário) Universidade de Coimbra, Portugal
2016 - 2017 Assistente Convidado (Docente Universitário) Universidade de Coimbra, Portugal
2014 - 2016 Assistente (Docente Universitário) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2014 - 2016 Assistente (Docente Universitário) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Projetos

Bolsa

Designação Financiadores
2013 - 2014 Soluções para a soldadura de metais altamente resistentes a corrosão em condições extremas
Projeto PSE – ARSOPI
Bolseiro de Investigação
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Concluído
2012 - 2012 "research neutron source (FRM II)"
7184/2012
Bolseiro de Investigação
European Commission
Concluído

Projeto

Designação Financiadores
2021 - Atual “Desenvolver nova geração de ferramentas de extrusão de alumínio”, 2021
COMPETE2020-POCI-01-0247-FEDER-042536
Investigador
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Em curso
2019 - 2022 "Melhorias no comportamento à fadiga de componentes de ligas de titânio na fabricação aditiva”
PTDC/EME-EME/28789/2017
Investigador Pós-doutorado
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Em curso
2016 - 2019 "Melhoraria do comportamento mecânico de componentes funcionais híbridos obtidos por sinterização a laser"
PTDC/EMS-PRO/1356/2014
Bolseiro de Investigação
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Associação para a Inovação e Desenvolvimento da FCT
Concluído
2011 - 2013 Melhoria da resistência à fadiga através do processamento por ficção linear em juntas de alumínio soldadas por MIG
PTDC/EME-PME/114605/2009
Bolseiro de Investigação
Fundação para a Ciência e a Tecnologia
Concluído
Produções

Publicações

Artigo em conferência
  1. "Prediction of multiaxial fatigue life of notched maraging steel components manufactured by selective laser melting". 2022.
    10.1016/j.prostr.2022.03.097
  2. "Overloading effect on transient fatigue crack growth of Ti-6Al-4V parts produced by Laser Powder Bed Fusion". 2022.
    10.1016/j.prostr.2022.01.092
  3. "Cyclic deformation behaviour of AlSi10Mg aluminium alloy manufactured by laser-beam powder bed fusion". 2022.
    10.1016/j.prostr.2022.01.110
  4. Rui F. Fernandes; Joel Jesus; Luís Borrego; José M. Ferreira; José D. Costa. "Effect of heat treatment on fatigue crack growth performance of AlSi10Mg aluminum alloy submitted to LPBF". 2022.
    10.1016/j.prostr.2022.12.133
  5. Jesus, Joel. "Effect of artificial saliva on the fatigue and wear response of TiAl6V4 specimens produced by SLM". 2020.
    https://doi.org/10.1016/j.prostr.2020.10.092
  6. L. Borrego; Jesus, J.S.; Ferreira, J.A.M.; Costa, J.D.; Capela, C.. "Fatigue crack growth of TiAl6V4 parts produced by SLM under biaxial mode I/mode II loading". 2020.
    10.1016/j.prostr.2021.12.019
  7. Borrego, L.P.; Jesus, J.S.; Ferreira, J.A.M.; Costa, J.D.; Capela, C.. "Fatigue crack growth of TiAl6V4 parts produced by SLM under biaxial mode I/mode II loading". 2020.
    10.1016/j.prostr.2021.12.019
  8. Jesus, Joel; Neto, DM; Fernandes, RF; Borges, MF; Antunes, FV; Sérgio, ER. "Effect of remaining ligament on fatigue crack growth". 2020.
    10.1016/j.prostr.2021.10.066
  9. Borrego, L.P.; De Jesus, J.; Ferreira, J.A.M.; Costa, J.D.M.; Capela, C.. "Assessment of the fatigue performance of heat-treated addictive manufactured TiAl6V4 specimens". 2019.
    10.1016/j.prostr.2019.08.212
  10. Jesus, J.S.; Gruppelaar, M.; Costa, J.M.; Loureiro, A.; Ferreira, J.A.M.. "Effect of geometrical parameters on Friction Stir Welding of AA 5083-H111 T-joints". 2016.
    10.1016/j.prostr.2016.02.033
Artigo em revista
  1. Micael F. Borges; Fernando V. Antunes; Joel Jesus; Ricardo Branco; Pedro Prates; Diogo M. Neto. "Effect of L-T and S-T orientations on fatigue crack growth in an aluminum 7050-T7451 plate". Fatigue & Fracture of Engineering Materials & Structures (2023): http://dx.doi.org/10.1111/ffe.14067.
    10.1111/ffe.14067
  2. D.M. Neto; N. Cavaleiro; E.R. Sérgio; J. Jesus; A. Camacho-Reyes; F.V. Antunes. "Effect of crack flank holes on fatigue crack growth". International Journal of Fatigue (2023): https://doi.org/10.1016/j.ijfatigue.2023.107505.
    10.1016/j.ijfatigue.2023.107505
  3. "Influence of specimen orientation on fatigue crack growth in 7050-T7451 and 2050-T8 aluminium alloys". International Journal of Fatigue 164 (2022): 107136-107136. http://dx.doi.org/10.1016/j.ijfatigue.2022.107136.
    10.1016/j.ijfatigue.2022.107136
  4. "On the use of the cumulative strain energy density for fatigue life assessment in advanced high-strength steels". International Journal of Fatigue 164 (2022): 107121-107121. http://dx.doi.org/10.1016/j.ijfatigue.2022.107121.
    10.1016/j.ijfatigue.2022.107121
  5. "“Influence of post-processing heat treatment on the cyclic deformation behaviour of AlSi10Mg aluminium alloy subjected to laser powder bed fusion”". International Journal of Fatigue (2022): 107157-107157. http://dx.doi.org/10.1016/j.ijfatigue.2022.107157.
    10.1016/j.ijfatigue.2022.107157
  6. Jesus, J.S.; Borrego, L.P.; Ferreira, J.A.M.; Costa, J.D.; Batista, A.C.; Capela, C.. "Fatigue crack growth in Ti-6Al-4V specimens produced by Laser Powder Bed Fusion and submitted to Hot Isostatic Pressing". Theoretical and Applied Fracture Mechanics 118 (2022): 103231. http://dx.doi.org/10.1016/j.tafmec.2021.103231.
    10.1016/j.tafmec.2021.103231
  7. "Fatigue crack growth under mixed mode I + II in Ti-6Al-4V specimens produced by Laser powder Bed fusion". Engineering Fracture Mechanics 264 (2022): 108327-108327. http://dx.doi.org/10.1016/j.engfracmech.2022.108327.
    10.1016/j.engfracmech.2022.108327
  8. "Influence of Deposition Plane Angle and Saline Corrosion on Fatigue Crack Growth in Maraging Steel Components Produced by Laser Powder Bed Fusion". Metals 12 3 (2022): 433-433. http://dx.doi.org/10.3390/met12030433.
    10.3390/met12030433
  9. Patricio G. Riofrío; Joel de Jesus; José A. M. Ferreira; Carlos Capela. "Influence of Local Properties on Fatigue Crack Growth of Laser Butt Welds in Thin Plates of High-Strength Low-Alloy Steel". Applied Sciences 11 16 (2021): 7346-7346. https://doi.org/10.3390/app11167346.
    10.3390/app11167346
  10. Luís Santos; Joel de de Jesus; Luís Borrego; José A. M. Ferreira; Rui F. Fernandes; José D. M. da da Costa; Carlos Capela. "Fatigue Behavior of Hybrid Components Containing Maraging Steel Parts Produced by Laser Powder Bed Fusion". Metals (2021): https://doi.org/10.3390/met11050835.
    10.3390/met11050835
  11. J.S. Jesus. "Mechanisms of fatigue crack growth in Ti-6Al-4V alloy subjected to single overloads". Theoretical and Applied Fracture Mechanics (2021): 103024-103024. http://dx.doi.org/10.1016/j.tafmec.2021.103024.
    10.1016/j.tafmec.2021.103024
  12. J. S. Jesus; L. P. Borrego; J. A. M. Ferreira; J. D. Costa; C. Capela. "Fatigue behavior of Ti6Al4V alloy components manufactured by selective laser melting subjected to hot isostatic pressing and residual stress relief". Fatigue & Fracture of Engineering Materials & Structures (2021): https://doi.org/10.1111/ffe.13450.
    10.1111/ffe.13450
  13. Joel de Jesus; Micael Borges; Fernando Antunes; José Ferreira; Luis Reis; Carlos Capela. "A Novel Specimen Produced by Additive Manufacturing for Pure Plane Strain Fatigue Crack Growth Studies". Metals 11 3 (2021): 433-433. https://doi.org/10.3390/met11030433.
    10.3390/met11030433
  14. Joel de Jesus; José António Martins Ferreira; Luís Borrego; José D. Costa; Carlos Capela. "Fatigue Failure from Inner Surfaces of Additive Manufactured Ti-6Al-4V Components". Materials (2021): https://doi.org/10.3390/ma14040737.
    10.3390/ma14040737
  15. Jesus, Joel. "Numerical Prediction of the Fatigue Crack Growth Rate in SLM Ti-6Al-4V Based on Crack Tip Plastic Strain". Metals (2020):
    10.3390/met10091133
  16. Jesus, Joel. "“Fatigue crack growth under corrosive environments of Ti-6Al-4V specimens produced by SLM”". Engineering Failure Analysis (2020): http://dx.doi.org/10.1016/j.engfailanal.2020.104852.
    10.1016/j.engfailanal.2020.104852
  17. J. S. Jesus; L. P. Borrego; J. A. M. Ferreira; J. D. Costa; C. Capela. "Fatigue crack growth behaviour in Ti6Al4V alloy specimens produced by selective laser melting". International Journal of Fracture (2020): https://doi.org/10.1007/s10704-019-00417-2.
    10.1007/s10704-019-00417-2
  18. Jesus, Joel. "Effect of bead characteristics on the fatigue life of shot peened Al 7475-T7351 specimens". International Journal of Fatigue (2020): http://dx.doi.org/10.1016/j.ijfatigue.2020.105521.
    10.1016/j.ijfatigue.2020.105521
  19. Jesus, Joel. "Fatigue Crack Growth in Maraging Steel Obtained by Selective Laser Melting". Applied Sciences (2019): http://dx.doi.org/10.3390/app9204412.
    10.3390/app9204412
  20. Jesus, Joel. "Effect of heat treatment on the fatigue crack growth behaviour in additive manufactured AISI 18Ni300 steel". (2019): http://dx.doi.org/10.1016/j.tafmec.2019.04.005.
    10.1016/j.tafmec.2019.04.005
  21. Jesus, Joel. "Fatigue crack propagation along interfaces of selective laser melting steel hybrid parts". Fatigue & Fracture of Engineering Materials & Structures (2019): http://dx.doi.org/10.1111/ffe.13072.
    10.1111/ffe.13072
  22. Jesus, Joel. "Response of fabric insert injection overmolding PP based composites subjected to single and muti-impact". Frattura ed Integrità Strutturale (2019): http://doi.org/10.3221/IGF-ESIS.48.25.
    10.3221/IGF-ESIS.48.25
  23. Jesus, Joel. "Effect of machining parameters on the mechanical properties of high dosage short –carbon- fiber reinforced composites". Frattura ed Integrità Strutturale (2019): http://doi.org/10.3221/IGF-ESIS.48.26.
    10.3221/IGF-ESIS.48.26
  24. Jesus, Joel. "Environmental effect on the fatigue crack propagation of AM TiAl6V4 alloy specimens". Procedia Structural Integrity (2019): http://dx.doi.org/10.1016/j.prostr.2019.08.075.
    10.1016/j.prostr.2019.08.075
  25. Jesus, Joel. "Fatigue behaviour of maraging steel samples produced by SLM under constant and variable amplitude loading". Procedia Structural Integrity 22 (2019): 10-16. http://dx.doi.org/10.1016/j.prostr.2020.01.002.
    10.1016/j.prostr.2020.01.002
  26. Luis M. S. Santos; Joel Alexandre da Silva de Jesus; J.A.M. Ferreira; COSTA JDM; Carlos Capela. "Fracture Toughness of Hybrid Components with Selective Laser Melting 18Ni300 Steel Parts". Applied Sciences (2018): http://www.mdpi.com/2076-3417/8/10/1879.
    10.3390/app8101879
  27. Jesus, J.S.; Costa, J.M.; Loureiro, A.; Ferreira, J.M.. "Assessment of friction stir welding aluminium T-joints". Journal of Materials Processing Technology 255 (2018): 387-399. http://www.scopus.com/inward/record.url?eid=2-s2.0-85039866531&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2017.12.036
  28. Jesus, Joel. "A study of fatigue notch sensibility on titanium alloy TiAl6V4 parts manufactured by selective laser melting". Procedia Structural Integrity (2018): http://dx.doi.org/10.1016/j.prostr.2018.12.186.
    10.1016/j.prostr.2018.12.186
  29. Jesus, J.S.; Costa, J.M.; Loureiro, A.; Ferreira, J.M.. "Fatigue strength improvement of GMAW T-welds in AA 5083 by friction-stir processing". International Journal of Fatigue 97 (2017): 124-134. http://www.scopus.com/inward/record.url?eid=2-s2.0-85007487814&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2016.12.034
  30. Santos, L.M.S.; Ferreira, J.A.M.; Jesus, J.S.; Costa, J.M.; Capela, C.. "Fatigue behaviour of selective laser melting steel components". Theoretical and Applied Fracture Mechanics 85 (2016): 9-15. http://www.scopus.com/inward/record.url?eid=2-s2.0-84991244856&partnerID=MN8TOARS.
    10.1016/j.tafmec.2016.08.011
  31. J.A.M. Ferreira; L.M.S. Santos; J. da Silva; J.M. Costa; C. Capela. "Assessment of the fatigue life on functional hybrid laser sintering steel components". Procedia Structural Integrity 1 (2016): 126-133. https://doi.org/10.1016%2Fj.prostr.2016.02.018.
    10.1016/j.prostr.2016.02.018
  32. Borrego, L.P.; Costa, J.D.; Jesus, J.S.; Loureiro, A.R.; Ferreira, J.M.. "Fatigue life improvement by friction stir processing of 5083 aluminium alloy MIG butt welds". Theoretical and Applied Fracture Mechanics 70 (2014): 68-74. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903752947&partnerID=MN8TOARS.
    10.1016/j.tafmec.2014.02.002
  33. Costa, J.D.M.; Jesus, J.S.; Loureiro, A.; Ferreira, J.A.M.; Borrego, L.P.. "Fatigue life improvement of mig welded aluminium T-joints by friction stir processing". International Journal of Fatigue 61 (2014): 244-254. http://www.scopus.com/inward/record.url?eid=2-s2.0-84893739435&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2013.11.004
  34. De Jesus, J.S.; Loureiro, A.; Costa, J.M.; Ferreira, J.M.. "Effect of tool geometry on friction stir processing and fatigue strength of MIG T welds on Al alloys". Journal of Materials Processing Technology 214 11 (2014): 2450-2460. http://www.scopus.com/inward/record.url?eid=2-s2.0-84902835447&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2014.05.012
  35. da Silva, J.; Costa, J.M.; Loureiro, A.; Ferreira, J.M.. "Fatigue behaviour of AA6082-T6 MIG welded butt joints improved by friction stir processing". Materials and Design 51 (2013): 315-322. http://www.scopus.com/inward/record.url?eid=2-s2.0-84877797868&partnerID=MN8TOARS.
    10.1016/j.matdes.2013.04.026
Capítulo de livro
  1. Jesus, Joel. "A Study of the Shot Peening Effect on the Fatigue Life Improvement of Al 7475-T7351 3PB Specimens". 2019.
    10.1007/978-3-030-13980-3_43
Livro
  1. Nobre, J.P.; Batista, A.C.; Kornmeier, J.R.; Costa, J.D.; Loureiro, A.; Jesus, J.S.. Neutron and X-ray diffraction residual stress measurements in aluminium alloys MIG welded T-joints after friction stir processing. 2014.
    10.4028/www.scientific.net/AMR.996.439