Francisco Andrade Pires (501D-0274-1143)

Curriculum Vitae

Francisco Andrade Pires

Francisco Andrade Pires is Full Professor of Mechanical Engineering at the Faculty of Engineering of the University of Porto (FEUP). He obtained his Habilitation in 2018, a PhD in Computational Mechanics in 2005, and his MSc and degree in Mechanical Engineering from FEUP. His research focuses on computational mechanics, with emphasis on multiscale constitutive modelling, nonlinear material behaviour, and the simulation of complex engineering processes. He has made significant contributions to finite element and multiscale methodologies applied to composites, damage and fracture, and advanced manufacturing. He has authored over 110 journal publications and supervised 22 PhD theses, 7 postdoctoral researchers, and more than 30 MSc dissertations. He has led 7 research projects as Principal Investigator and participated in several others, including international collaborations. His work increasingly addresses contact interfaces, surface engineering, and predictive computational design under uncertainty. His research spans aerospace, transport and energy applications, with a strong focus on bridging fundamental mechanics and engineering design through multiscale modelling and optimisation.

Ler resumo completo ↓

Identificação

Identificação pessoal

Nome completo: Francisco Andrade Pires

Nomes de citação

Andrade Pires, FM

Identificadores de autor

Ciência ID: 501D-0274-1143
ORCID iD: 0000-0002-4802-6360

Formação

	Grau	Classificação
2018/07/10 Concluído	n/a (Título de Agregado) Universidade do Porto Faculdade de Engenharia, Portugal
2005 Concluído	Computational Mechanics (Doutoramento) University of Wales Trinity Saint David, Reino Unido "Issues on the Finite Element Modelling of Degradation and Prediction of Failure in Finitely Straining Ductile Materials" (TESE/DISSERTAÇÃO)	Approved
2001 Concluído	MsC in Mechanical Engineering (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal "Modelação por elementos finitos da iniciação da fractura dúctil nos processos de enformação plástica em massa" (TESE/DISSERTAÇÃO)	Approved with Very Good (maximum grade)
1998 Concluído	Mechanical Engineering (Licenciatura) Universidade do Porto Faculdade de Engenharia, Portugal "n/a" (TESE/DISSERTAÇÃO)

Percurso profissional

Docência no Ensino Superior

	Categoria Profissional Instituição de acolhimento	Empregador
2022/02/15 - Atual	Professor Catedrático (Docente Universitário)	Universidade do Porto Faculdade de Engenharia, Portugal
	Universidade do Porto Faculdade de Engenharia, Portugal
2018/09/25 - 2022/02/14	Professor Associado (Docente Universitário)	Universidade do Porto Faculdade de Engenharia, Portugal

2013/09 - 2018/09	Professor Auxiliar (Docente Universitário)	Universidade do Porto Faculdade de Engenharia, Portugal
	Universidade do Porto Faculdade de Engenharia, Portugal
2006/09/25 - 2007/06/16	Professor Auxiliar (Docente Universitário)	Universidade do Porto Faculdade de Engenharia, Portugal

Outros

	Categoria Profissional Instituição de acolhimento	Empregador
2007/07/17 - 2013/07/16	Engineering Design Advanced Manufacturing Professor, MIT-Portugal Program	Universidade do Porto Faculdade de Engenharia, Portugal

2001/12/19 - 2005/12/08	Assistant Lecturer of DEMEGI	Universidade do Porto Faculdade de Engenharia, Portugal

1998/11/03 - 2001/12/18	Trainee Assistant of DEMEGI	Universidade do Porto Faculdade de Engenharia, Portugal

Projetos

Projeto

	Designação	Financiadores
2025/01/01 - 2029/12/31	Laboratório Associado de Energia, Transportes e Aeroespacial UID/50022/2025 10.54499/UID/50022/2025 Associated Laboratory for Energy Transports and Aeronautics, Portugal Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Instituto de Engenharia Mecânica, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal Universidade da Beira Interior, Portugal	Fundação para a Ciência e a Tecnologia Em curso
2021/01/01 - 2025/12/31	Laboratório Associado em Energia, Transportes e Aeroespacial LA/P/0079/2020 10.54499/LA/P/0079/2020 UID/EMS/50022/2019 Instituto de Engenharia Mecânica, Portugal Universidade da Beira Interior, Portugal Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal	Fundação para a Ciência e a Tecnologia Em curso
2021/01/01 - 2025/12/31	Associate Laboratory of Energy, Transports and Aerospace. LA/P/0079/2020 10.54499/LA/P/0079/2020 Associated Laboratory for Energy Transports and Aeronautics, Portugal Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Instituto de Engenharia Mecânica, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal Universidade da Beira Interior, Portugal	Fundação para a Ciência e a Tecnologia Em curso
2020/01/01 - 2024/12/31	Laboratório Associado de Energia, Transportes e Aeronáutica UIDP/50022/2020 10.54499/UIDP/50022/2020 Associated Laboratory for Energy Transports and Aeronautics, Portugal Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Instituto de Engenharia Mecânica, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal Universidade da Beira Interior, Portugal	Fundação para a Ciência e a Tecnologia Concluído
2020/01/01 - 2023/12/31	Associate Laboratory of Energy, Transports and Aeronautics UIDB/50022/2020 10.54499/UIDB/50022/2020 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal Instituto de Engenharia Mecânica, Portugal Universidade da Beira Interior, Portugal	Fundação para a Ciência e a Tecnologia Concluído
2019/11/01 - 2022/11/30	TREAL - Thermoplastic Material Allowable Generation using a REliability-based VirtuAL Modeling Platform 864723 Investigador responsável Universidade do Porto Faculdade de Engenharia, Portugal	European Commission Em curso
2018/09/05 - 2020/03/04	Resposta reológica extensional de ferrofluidos para a limpeza do oceano MIT-EXPL/IRA/0077/2017 Investigador Universidade do Porto Centro de Estudos de Fenómenos de Transporte, Portugal Universidade do Porto Faculdade de Engenharia, Portugal Universidade do Porto Centro Interdisciplinar de Investigação Marinha e Ambiental, Portugal Universidade de Aveiro, Portugal	Fundação para a Ciência e a Tecnologia Concluído
2016/01/01 - 2019/12/31	Introdução de tecnonogias baseadas em materiais avançados nas indústrias da mobilidade. MITP-TB/PFM/0005/2013 Investigador Associated Laboratory for Energy Transports and Aeronautics, Portugal Universidade do Porto Faculdade de Engenharia, Portugal Universidade de Lisboa Instituto Superior Técnico, Portugal Universidade do Minho, Portugal	Fundação para a Ciência e a Tecnologia Concluído
2016/06/01 - 2019/12/01	Desenvolvimento de Compósitos de Matrix Polimérica não Convencionais baseados em Análise Multi Escala e Otimização PTDC/EMS-PRO/4732/2014 Investigador responsável Instituto de Engenharia Mecanica e Gestao Industrial, Portugal Instituto de Engenharia Mecânica, Portugal Associação para a Inovação e Desenvolvimento da FCT, Portugal	Fundação para a Ciência e a Tecnologia Concluído
2011/04/01 - 2014/10/31	ModTOP - Modelação Numérica do Processo de Tow Placement PTDC/EME-TME/115472/2009 Investigador Universidade do Porto Faculdade de Engenharia, Portugal Instituto de Engenharia Mecanica e Gestao Industrial, Portugal	Fundação para a Ciência e a Tecnologia Concluído
2010/05/01 - 2013/10/31	Modelação computacional multiescala de materiais de base polimérica PTDC/EME-PME/108859/2008 Investigador responsável Universidade do Minho, Portugal Universidade do Minho Instituto de Polímeros e Compósitos, Portugal Instituto de Engenharia Mecânica, Portugal	Fundação para a Ciência e a Tecnologia Concluído
2010/04/01 - 2013/03/31	Modelação multi-escala de materiais com estrutura cristalográfica hexagonal compacta HCP e previsão do retorno elástico PTDC/EME-TME/105688/2008 Investigador responsável Universidade de Aveiro, Portugal Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal Instituto de Engenharia Mecanica e Gestao Industrial, Portugal Instituto de Engenharia Mecânica, Portugal	Fundação para a Ciência e a Tecnologia Concluído
2010/04/01 - 2013/03/31	Métodos meshless e acoplamento com o MEF para estruturas tipo casca PTDC/EME-TME/105237/2008 Investigador Universidade de Aveiro, Portugal Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal Instituto de Engenharia Mecânica, Portugal	Fundação para a Ciência e a Tecnologia Concluído
2011/01/01 - 2012/12/31	Projecto Estratégico - LA 22 - 2011-2012 PEst-OE/EME/LA0022/2011 PEst-C/EEI/UI0308/2011 Instituto de Engenharia Mecânica, Portugal Universidade da Beira Interior, Portugal Instituto de Engenharia de Sistemas e Computadores de Coimbra, Portugal Universidade de Lisboa Instituto Superior Técnico, Portugal Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal	Fundação para a Ciência e a Tecnologia Concluído
2009/07/01 - 2012/12/31	DESENVOLVIMENTO DE SISTEMAS INTEGRADOS PARA INTERIORES INTELIGENTES MIT-Pt/EDAM-SI/0025/2008 Investigador responsável Universidade do Porto Faculdade de Engenharia, Portugal Universidade de Lisboa Instituto Superior Técnico, Portugal Universidade do Minho, Portugal	Fundação para a Ciência e a Tecnologia Concluído
2007/07/01 - 2011/03/31	MODELAÇÃO COMPUTACIONAL DO CORTE DE METAIS PTDC/EME-TME/71325/2006 Investigador responsável Instituto de Engenharia Mecânica, Portugal Universidade do Porto Faculdade de Engenharia, Portugal	Fundação para a Ciência e a Tecnologia Concluído
2007/06/01 - 2010/03/31	Modelação Numérica do Processo de Enrolamento Filamentar usando o Método dos Elementos Finitos PTDC/EME-PME/73528/2006 Investigador responsável Universidade do Porto Faculdade de Engenharia, Portugal Instituto de Engenharia Mecanica e Gestao Industrial, Portugal	Fundação para a Ciência e a Tecnologia Concluído
2007/07/01 - 2009/12/31	Modelo computacional para a falha de materiais dúcteis em grandes deformações usando uma abordagem por elementos finitos generalizados PTDC/EME-TME/74589/2006 Investigador Universidade do Porto Faculdade de Engenharia, Portugal Instituto de Engenharia Mecânica, Portugal	Fundação para a Ciência e a Tecnologia Concluído
2005/09/01 - 2007/12/31	Tecnologias Avançadas de Ligação de Metais Duros POCI/EME/56076/2004 Investigador Instituto de Engenharia Mecânica, Portugal Instituto de Engenharia Mecânica, Portugal	Fundação para a Ciência e a Tecnologia Concluído

Produções

Publicações

Artigo em revista

Rúben Pereira; Diogo Cardoso; João Silva; Rui Gomes; Francisco Pires; Nuno Correia. "Thin-ply ADFP preforms for liquid composite moulding: An exploratory study". Composites Part A: Applied Science and Manufacturing (2026): https://doi.org/10.1016/j.compositesa.2026.109722.
10.1016/j.compositesa.2026.109722
Tiago Silva Sabino; António Couto Carneiro; Rodrigo Pinto Carvalho; Francisco Andrade Pires. "A mortar-based finite deformation formulation for adhesive frictional contact using a primal-dual active set strategy". Computer Methods in Applied Mechanics and Engineering (2026): https://doi.org/10.1016/j.cma.2025.118688.
10.1016/j.cma.2025.118688
T. M. Nogueira Pires; R. P. Cardoso Coelho; F. M. Andrade Pires. "Composite bayesian optimisation for multi-objective problems with smooth Tchebycheff scalarisation". Structural and Multidisciplinary Optimization (2026): http://dx.doi.org/10.1007/s00158-025-04229-y.
10.1007/s00158-025-04229-y
R.P. Cardoso Coelho; F.M. Andrade Pires. "Efficient and accurate multiscale modelling of TRIP steels: Advanced numerical strategies and experimental validation". Finite Elements in Analysis and Design (2026): https://doi.org/10.1016/j.finel.2025.104484.
10.1016/j.finel.2025.104484
Wanderson F. dos Santos; Alina S.L. Rodrigues; Igor A. Rodrigues Lopes; Francisco M. Andrade Pires; Sergio P.B. Proença; Zilda C. Silveira. "Size effects in 3D-printed polymeric lattices under three-point bending: Manufacturing, testing, and modelling". European Journal of Mechanics - A/Solids (2025): http://dx.doi.org/10.1016/j.euromechsol.2025.105728.
10.1016/j.euromechsol.2025.105728
António M. Couto Carneiro; Rodrigo Pinto Carvalho; Eduardo A. de Souza Neto; Francisco M. Andrade Pires. "Multiscale contact homogenisation through the method of multiscale virtual power: Computational implementation and numerical aspects". Computer Methods in Applied Mechanics and Engineering (2025): https://doi.org/10.1016/j.cma.2025.118146.
10.1016/j.cma.2025.118146
A. Francisca Carvalho Alves; Bernardo P. Ferreira; F.M. Andrade Pires. "Multi-scale optimization of PC/ABS polymer blends: Microstructural design for superior toughness, strength, and weight efficiency". Finite Elements in Analysis and Design (2025): http://dx.doi.org/10.1016/j.finel.2025.104407.
10.1016/j.finel.2025.104407
Bernardo P. Ferreira; R.P. Cardoso Coelho; F.M. Andrade Pires; M.A. Bessa. "Finite strain self-consistent clustering analysis under multiplicative kinematics". Computers & Structures (2025): http://dx.doi.org/10.1016/j.compstruc.2025.107886.
10.1016/j.compstruc.2025.107886
Wanderson F. dos Santos; Alina S.L. Rodrigues; Igor A. Rodrigues Lopes; Francisco M. Andrade Pires; Sergio P.B. Proença; Zilda C. Silveira. "Analysis of a novel 3D-printed mechanical metamaterial with tension-induced undulation: Experimental and numerical investigations". International Journal of Solids and Structures (2025): http://dx.doi.org/10.1016/j.ijsolstr.2025.113402.
10.1016/j.ijsolstr.2025.113402
Paulo Ricardo Ferreira Rocha; António Manuel Couto Carneiro; Francisco Manuel Andrade Pires. "Effect of the temporal discretization of contact forces on dynamic contact simulations using singular non-standard quadrature rules for the mass matrix". Finite Elements in Analysis and Design (2025): https://doi.org/10.1016/j.finel.2025.104357.
10.1016/j.finel.2025.104357
Guilherme Fonseca Gonçalves; Igor A. Rodrigues Lopes; António M. Couto Carneiro; Francisco M. Andrade Pires. "A critical comparison of gradient and integral nonlocal damage models: Formulation, numerical predictions and computational aspects". Finite Elements in Analysis and Design (2025): https://doi.org/10.1016/j.finel.2025.104358.
10.1016/j.finel.2025.104358
R.P. Cardoso Coelho; A. Francisca Carvalho Alves; T.M. Nogueira Pires; F.M. Andrade Pires. "A composite Bayesian optimisation framework for material and structural design". Computer Methods in Applied Mechanics and Engineering (2025): https://doi.org/10.1016/j.cma.2024.117516.
10.1016/j.cma.2024.117516
António M. Couto Carneiro; Francisco M. Andrade Pires; Eduardo A. de Souza Neto. "Multiscale contact homogenisation: A novel perspective through the method of multiscale virtual power". Computer Methods in Applied Mechanics and Engineering (2024): https://doi.org/10.1016/j.cma.2024.117394.
10.1016/j.cma.2024.117394
R. P. Cardoso Coelho; A. Francisca Carvalho Alves; T. M. Nogueira Pires; F. M. Andrade Pires. "piglot: an Open-source Package for Derivative-free Optimisation of Numerical Responses". Journal of Open Source Software (2024): https://doi.org/10.21105/joss.06652.
10.21105/joss.06652
R.P. Cardoso Coelho; A. Francisca Carvalho Alves; F.M. Andrade Pires. "Efficient constitutive parameter identification through optimisation-based techniques: A Comparative analysis and novel composite Bayesian optimisation strategy". Computer Methods in Applied Mechanics and Engineering (2024): https://doi.org/10.1016/j.cma.2024.117039.
10.1016/j.cma.2024.117039
Wanderson F. dos Santos; Igor A. Rodrigues Lopes; Francisco M. Andrade Pires; Sergio P.B. Proença. "Exploring novel mechanical metamaterials: Unravelling deformation mode coupling and size effects through second-order computational homogenisation". International Journal of Solids and Structures (2024): https://doi.org/10.1016/j.ijsolstr.2024.112724.
10.1016/j.ijsolstr.2024.112724
Alexandre D. C. Amaro; A. Francisca Carvalho Alves; F.M. Andrade Pires. "Multi-scale modelling and analysis of the behaviour of PC/ABS blends with emphasis on interfacial/bulk damage". Finite Elements in Analysis and Design (2024): https://doi.org/10.1016/j.finel.2023.104083.
10.1016/j.finel.2023.104083
M. Vieira de Carvalho; I.A. Rodrigues Lopes; F.M. Andrade Pires. "On the solution of unstable fracture problems with non-linear cohesive laws". Engineering Fracture Mechanics (2024): https://doi.org/10.1016/j.engfracmech.2023.109736.
10.1016/j.engfracmech.2023.109736
M. Vieira de Carvalho; I.A. Rodrigues Lopes; F.M. Andrade Pires. "A multi-scale formulation for polycrystalline materials accounting for cohesive micro-cracks: Homogenisation of the traction-separation law". International Journal of Plasticity (2023): https://doi.org/10.1016/j.ijplas.2023.103780.
10.1016/j.ijplas.2023.103780
R.P. Cardoso Coelho; M. Vieira de Carvalho; F.M. Andrade Pires. "A multi-scale model combining martensitic transformations with multi-phase crystallographic slip". Computers & Structures (2023): https://doi.org/10.1016/j.compstruc.2023.107174.
10.1016/j.compstruc.2023.107174
Wanderson F. dos Santos; Igor A. Rodrigues Lopes; Francisco M. Andrade Pires; Sergio P.B. Proença. "Second-order multi-scale modelling of natural and architected materials in the presence of voids: Formulation and numerical implementation". Computer Methods in Applied Mechanics and Engineering (2023): https://doi.org/10.1016/j.cma.2023.116374.
10.1016/j.cma.2023.116374
A. Francisca Carvalho Alves; Bernardo P. Ferreira; F.M. Andrade Pires. "On the modeling of cavitation and yielding in rubber-toughened amorphous polymers: Fully implicit implementation and optimization-based calibration". International Journal of Solids and Structures (2023): https://doi.org/10.1016/j.ijsolstr.2023.112488.
10.1016/j.ijsolstr.2023.112488
Igor A. Rodrigues Lopes; Miguel Vieira de Carvalho; João A. Marques da Silva; Rui P. Cardoso Coelho; Francisco M. Andrade Pires. "Second-order homogenisation of crystal plasticity and martensitic transformation". European Journal of Mechanics - A/Solids (2023): http://dx.doi.org/10.1016/j.euromechsol.2023.105104.
10.1016/j.euromechsol.2023.105104
Igor A. Rodrigues Lopes; Federico Danzi; Albertino Arteiro; Francisco M. Andrade Pires; Pedro P. Camanho. "Modelling intralaminar damage mechanisms in fibre reinforced polymers at finite strains". International Journal of Solids and Structures (2023): https://doi.org/10.1016/j.ijsolstr.2023.112449.
10.1016/j.ijsolstr.2023.112449
A. Francisca Carvalho Alves; Bernardo P. Ferreira; F.M. Andrade Pires. "A constitutive model for amorphous thermoplastics from low to high strain rates: Formulation and computational aspects". International Journal of Plasticity (2023): https://doi.org/10.1016/j.ijplas.2023.103712.
10.1016/j.ijplas.2023.103712
T. Pandim; K. Sales de Oliveira; J.A. Araújo; F.M. Andrade Pires; T. Doca. "Indentation, creep and axial–torsional fretting wear analysis of PC/ABS blends". Tribology International (2023): http://dx.doi.org/10.1016/j.triboint.2023.108763.
10.1016/j.triboint.2023.108763
A.M. Couto Carneiro; A. Francisca Carvalho Alves; R.P. Cardoso Coelho; Jaime S. Cardoso; F.M. Andrade Pires. "A simple machine learning-based framework for faster multi-scale simulations of path-independent materials at large strains". Finite Elements in Analysis and Design (2023): https://doi.org/10.1016/j.finel.2023.103956.
10.1016/j.finel.2023.103956
Bernardo P. Ferreira; F. M. Andrade Pires; Miguel A. Bessa. "CRATE: A Python package to perform fast material simulations". Journal of Open Source Software (2023): https://doi.org/10.21105/joss.05594.
10.21105/joss.05594
A. Francisca Carvalho Alves; Bernardo P. Ferreira; F.M. Andrade Pires. "Constitutive modeling of amorphous thermoplastics from low to high strain rates: Formulation and critical comparison employing an optimization-based parameter identification". International Journal of Solids and Structures (2023): https://doi.org/10.1016/j.ijsolstr.2023.112258.
10.1016/j.ijsolstr.2023.112258
T. Silva Sabino; A.M. Couto Carneiro; R. Pinto Carvalho; F.M. Andrade Pires. "Evolution of the real contact area of self-affine non-Gaussian surfaces". International Journal of Solids and Structures (2023): https://doi.org/10.1016/j.ijsolstr.2023.112173.
10.1016/j.ijsolstr.2023.112173
José L.P. Vila-Chã; António M. Couto Carneiro; Bernardo P. Ferreira; F.M. Andrade Pires. "A numerical assessment of partitioned implicit methods for thermomechanical problems". Computers & Structures (2023): http://dx.doi.org/10.1016/j.compstruc.2022.106969.
10.1016/j.compstruc.2022.106969
da Silva, JAM; de Carvalho, MV; Coelho, RPC; Lopes, IAR; Pires, FMA. "On the representativeness of polycrystalline models with transformation induced plasticity". FINITE ELEMENTS IN ANALYSIS AND DESIGN (2023):
10.1016/j.finel.2022.103875
Miguel Vieira de Carvalho; Rui Pedro Cardoso Coelho; Francisco M. Andrade Pires. "On the computational treatment of fully coupled crystal plasticity slip and martensitic transformation constitutive models at finite strains". International Journal for Numerical Methods in Engineering (2022): https://doi.org/10.1002/nme.7059.
10.1002/nme.7059
Igor A. Rodrigues Lopes; Francisco M. Andrade Pires. "A fully second-order homogenization formulation for the multi-scale modeling of heterogeneous materials". International Journal for Numerical Methods in Engineering (2022): https://doi.org/10.1002/nme.7063.
10.1002/nme.7063
Bernardo P. Ferreira; F.M. Andrade Pires; M.A. Bessa. "Adaptivity for clustering-based reduced-order modeling of localized history-dependent phenomena". Computer Methods in Applied Mechanics and Engineering 393 (2022): 114726-114726. https://doi.org/10.1016/j.cma.2022.114726.
10.1016/j.cma.2022.114726
Miguel Vieira Carvalho; Daniel Bortoli; Francisco M. Andrade Pires. "Consistent modeling of the coupling between crystallographic slip and martensitic phase transformation for mechanically induced loadings". International Journal for Numerical Methods in Engineering (2022): https://doi.org/10.1002/nme.6962.
10.1002/nme.6962
Igor A. Rodrigues Lopes; Francisco M. Andrade Pires. "Formulation and numerical implementation of a variationally consistent multi-scale model based on second-order computational homogenisation at finite strains for quasi-static problems". Computer Methods in Applied Mechanics and Engineering (2022): https://doi.org/10.1016/j.cma.2022.114714.
10.1016/j.cma.2022.114714
Bernardo P. Ferreira; José L.P. Vila-Chã; F.M. Andrade Pires. "An adaptive multi-temperature isokinetic method for the RVE generation of particle reinforced heterogeneous materials, Part II: Numerical assessment and statistical analysis". Mechanics of Materials 165 (2022): 104068-104068. https://doi.org/10.1016/j.mechmat.2021.104068.
10.1016/j.mechmat.2021.104068
Igor A. Rodrigues Lopes; Pedro P. Camanho; Francisco M. Andrade Pires; Albertino Arteiro. "An invariant-based elasto-visco-plastic model for unidirectional polymer composites at finite strains". International Journal of Solids and Structures 236-237 (2022): 111292-111292. https://doi.org/10.1016/j.ijsolstr.2021.111292.
10.1016/j.ijsolstr.2021.111292
Lopes, IAR; Pires, FMA. "An assessment of multi-scale models based on second-order computational homogenisation". COMPUTERS & STRUCTURES (2022):
10.1016/j.compstruc.2021.106679
Carvalho, RP; Carneiro, AMC; Pires, FMA; Popp, A. "An efficient algorithm for rigid/deformable contact interaction based on the dual mortar method". COMPUTATIONAL MECHANICS (2022):
10.1007/s00466-022-02226-2
Sabino, TS; Carneiro, AMC; Carvalho, RP; Pires, FMA. "The impact of non-Gaussian height distributions on the statistics of isotropic random rough surfaces". TRIBOLOGY INTERNATIONAL (2022):
10.1016/j.triboint.2022.107578
Carvalho, RP; Carneiro, AMC; Pires, FMA; Doca, T. "An efficient multiscale strategy to predict the evolution of the real contact area between rough surfaces". TRIBOLOGY INTERNATIONAL (2022):
10.1016/j.triboint.2021.107255
José L.P. Vila-Chã; Bernardo P. Ferreira; F.M. Andrade Pires. "An adaptive multi-temperature isokinetic method for the RVE generation of particle reinforced heterogeneous materials, Part I: Theoretical formulation and computational framework". Mechanics of Materials 163 (2021): 104069-104069. https://doi.org/10.1016/j.mechmat.2021.104069.
10.1016/j.mechmat.2021.104069
Lopes, IAR; Ferreira, BP; Pires, FMA. "On the efficient enforcement of uniform traction and mortar periodic boundary conditions in computational homogenisation". COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021):
10.1016/j.cma.2021.113930
Ministro, P; Dias, CC; Portela, F; Fernandes, S; Bernardo, S; Pires, F; Lago, P; et al. "Age at Diagnosis Is Determinant for the Outcome of Inflammatory Bowel Disease: Is It a Myth?". CLINICAL AND TRANSLATIONAL GASTROENTEROLOGY (2021):
10.14309/ctg.0000000000000309
Pandim, T.; Doca, T.; Figueiredo, A.R.; Pires, F.M.A.. "Torsional fretting wear experimental analysis of a R3 offshore steel against a PC/ABS blend". Tribology International 143 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85075886649&partnerID=MN8TOARS.
10.1016/j.triboint.2019.106090
Manaia, J.P.; Pires, F.A.; de Jesus, A.M.P.; Wu, S.. "Mechanical response of three semi crystalline polymers under different stress states: Experimental investigation and modelling". Polymer Testing 81 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85074490196&partnerID=MN8TOARS.
10.1016/j.polymertesting.2019.106156
Couto Carneiro, A.M.; Pinto Carvalho, R.; Andrade Pires, F.M.. "Representative contact element size determination for micromechanical contact analysis of self-affine topographies". International Journal of Solids and Structures 206 (2020): 262-281. http://www.scopus.com/inward/record.url?eid=2-s2.0-85092090817&partnerID=MN8TOARS.
10.1016/j.ijsolstr.2020.09.006
Eskandari, S.; Andrade Pires, F.M.; Camanho, P.P.; Cui, H.; Petrinic, N.; Marques, A.T.. "Analyzing the failure and damage of FRP composite laminates under high strain rates considering visco-plasticity". Engineering Failure Analysis 101 (2019): 257-273. http://www.scopus.com/inward/record.url?eid=2-s2.0-85063438039&partnerID=MN8TOARS.
10.1016/j.engfailanal.2019.03.008
Tenreiro Vieira, R.R.; De Bortoli, D.; Vieira De Carvalho, M.; Andrade Pires, F.M.. "The role of elastic anisotropy on the macroscopic constitutive response and yield onset of cubic oligo- And polycrystals". International Journal of Plasticity 121 (2019): 153-200. http://www.scopus.com/inward/record.url?eid=2-s2.0-85071944063&partnerID=MN8TOARS.
10.1016/j.ijplas.2019.06.007
Manaia, J.P.; Pires, F.A.; de Jesus, A.M.P.. "Elastoplastic and fracture behaviour of semi-crystalline polymers under multiaxial stress states". Frattura ed Integrita Strutturale 13 47 (2019): 82-103. http://www.scopus.com/inward/record.url?eid=2-s2.0-85060498165&partnerID=MN8TOARS.
10.3221/IGF-ESIS.47.08
Manaia, J.P.; Pires, F.A.; de Jesus, A.M.P.; Wu, S.. "Yield behaviour of high-density polyethylene: Experimental and numerical characterization". Engineering Failure Analysis 97 (2019): 331-353. http://www.scopus.com/inward/record.url?eid=2-s2.0-85059889160&partnerID=MN8TOARS.
10.1016/j.engfailanal.2019.01.001
D.E.S. Rodrigues; J. Belinha; F.M.A. Pires; L.M.J.S. Dinis; R.M. Natal Jorge. "Homogenization technique for heterogeneous composite materials using meshless methods". Engineering Analysis with Boundary Elements 92 (2018): 73-89. https://doi.org/10.1016/j.enganabound.2017.12.012.
10.1016/j.enganabound.2017.12.012
de Bortoli, D.; Adziman, F.; de Souza Neto, E.A.; Pires, F.M.A.. "Constitutive modelling of mechanically induced martensitic transformations: Prediction of transformation surfaces". Engineering Computations (Swansea, Wales) 35 2 (2018): 772-799. http://www.scopus.com/inward/record.url?eid=2-s2.0-85046363097&partnerID=MN8TOARS.
10.1108/EC-03-2017-0087
Pinto Carvalho, R.; Rodrigues Lopes, I.A.; Andrade Pires, F.M.. "Prediction of the yielding behaviour of ductile porous materials through computational homogenization". Engineering Computations (Swansea, Wales) 35 2 (2018): 604-621. http://www.scopus.com/inward/record.url?eid=2-s2.0-85046364654&partnerID=MN8TOARS.
10.1108/EC-03-2017-0069
Rodrigues, D.E.S.; Belinha, J.; Pires, F.M.A.; Dinis, L.M.J.S.; Jorge, R.M.N.. "Material homogenization technique for composites: A meshless formulation". Science and Technology of Materials 30 1 (2018): 50-59. http://www.scopus.com/inward/record.url?eid=2-s2.0-85050965976&partnerID=MN8TOARS.
10.1016/j.stmat.2018.01.001
Reis, F.J.P.; Rodrigues Lopes, I.A.; Andrade Pires, F.M.; Andrade, F.X.C.. "Microscale analysis of heterogeneous ductile materials with nonlocal damage models of integral type". Computers and Structures 201 (2018): 37-57. http://www.scopus.com/inward/record.url?eid=2-s2.0-85045795455&partnerID=MN8TOARS.
10.1016/j.compstruc.2018.02.013
Lopes, I.A.R.; Pires, F.M.A.; Reis, F.J.P.. "A mixed parallel strategy for the solution of coupled multi-scale problems at finite strains". Computational Mechanics 61 1-2 (2018): 157-180. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029543437&partnerID=MN8TOARS.
10.1007/s00466-017-1472-6
Farahani, B.V.; Belinha, J.; Pires, F.M.A.; Ferreira, A.J.M.. "A radial point interpolation meshless method extended with an elastic rate-independent continuum damage model for concrete materials". Mechanics of Advanced Materials and Structures 25 10 (2018): 855-867. http://www.scopus.com/inward/record.url?eid=2-s2.0-85018418660&partnerID=MN8TOARS.
10.1080/15376494.2017.1308593
Pires, F.M.A.; Li, C.. "Guest editorial". Engineering Computations (Swansea, Wales) 35 2 (2018): 498-498. http://www.scopus.com/inward/record.url?eid=2-s2.0-85046337310&partnerID=MN8TOARS.
10.1108/EC-02-2018-0104
S.M. Mirkhalaf; F.M. Andrade Pires; Ricardo Simoes. "Modelling of the post yield response of amorphous polymers under different stress states". International Journal of Plasticity 88 (2017): 159-187. https://doi.org/10.1016/j.ijplas.2016.10.008.
10.1016/j.ijplas.2016.10.008
Doca, T.; Andrade Pires, F.M.. "Finite element modeling of wear using the dissipated energy method coupled with a dual mortar contact formulation". Computers and Structures 191 (2017): 62-79. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021217455&partnerID=MN8TOARS.
10.1016/j.compstruc.2017.06.001
Farahani, B.V.; Belinha, J.; Pires, F.M.A.; Ferreira, A.J.M.; Moreira, P.M.G.P.. "A meshless approach to non-local damage modelling of concrete". Engineering Analysis with Boundary Elements 79 (2017): 62-74. http://www.scopus.com/inward/record.url?eid=2-s2.0-85018509490&partnerID=MN8TOARS.
10.1016/j.enganabound.2017.04.002
Eskandari, S.; Andrade Pires, F.M.; Camanho, P.P.; Marques, A.T.. "Damage analysis of out of plane undulated fiber composites". Composite Structures 152 (2016): 464-476. http://www.scopus.com/inward/record.url?eid=2-s2.0-84969857938&partnerID=MN8TOARS.
10.1016/j.compstruct.2016.05.062
Eskandari, S.; Andrade Pires, F.M.; Camanho, P.P.; Marques, A.T.. "Intralaminar damage in polymer composites in the presence of finite fiber rotation: Part I – Constitutive model". Composite Structures 151 (2016): 114-126. http://www.scopus.com/inward/record.url?eid=2-s2.0-84956860236&partnerID=MN8TOARS.
10.1016/j.compstruct.2016.01.047
Eskandari, S.; Andrade Pires, F.M.; Camanho, P.P.; Marques, A.T.. "Intralaminar damage in polymer composites in the presence of finite fiber rotation: Part II – Numerical analysis and validation". Composite Structures 151 (2016): 127-141. http://www.scopus.com/inward/record.url?eid=2-s2.0-84960076444&partnerID=MN8TOARS.
10.1016/j.compstruct.2016.01.048
Mirkhalaf, S.M.; Andrade Pires, F.M.; Simoes, R.. "Determination of the size of the Representative Volume Element (RVE) for the simulation of heterogeneous polymers at finite strains". Finite Elements in Analysis and Design 119 (2016): 30-44. http://www.scopus.com/inward/record.url?eid=2-s2.0-84975810854&partnerID=MN8TOARS.
10.1016/j.finel.2016.05.004
Mirkhalaf, S.M.; Andrade Pires, F.M.; Simoes, R.. "An elasto-viscoplastic constitutive model for polymers at finite strains: Formulation and computational aspects". Computers and Structures 166 (2016): 60-74. http://www.scopus.com/inward/record.url?eid=2-s2.0-84957070657&partnerID=MN8TOARS.
10.1016/j.compstruc.2016.01.002
Farahani, B.V.; Belinha, J.; Andrade Pires, F.M.; Ferreira, A.J.M.; Moreira, P.M.G.P.. "Extending a radial point interpolation meshless method to non-local constitutive damage models". Theoretical and Applied Fracture Mechanics 85 (2016): 84-98. http://www.scopus.com/inward/record.url?eid=2-s2.0-84991253298&partnerID=MN8TOARS.
10.1016/j.tafmec.2016.08.008
Miranda, H.D.; Pires, F.M.A.; Marques, A.T.. "Impact of the geometry of inclusions at the micro-scale on the overall stochastic properties". Mechanics of Advanced Materials and Structures 23 2 (2016): 117-127. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944691760&partnerID=MN8TOARS.
10.1080/15376494.2014.938792
Vaz, M.; Andrade Pires, F.M.. "A note on the thermal effects upon a Gurson-type material model". Continuum Mechanics and Thermodynamics 28 3 (2016): 785-798. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922712116&partnerID=MN8TOARS.
10.1007/s00161-015-0416-7
Nascimento, F.; Fernandes, J.C.S.; Vilaça, P.; Pires, F.M.A.. "Corrosion Behavior of the Friction Stir Welded AZ31 Magnesium Alloy". Microscopy and Microanalysis 21 (2015): 33-34. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944063375&partnerID=MN8TOARS.
10.1017/S1431927615013975
Wu, SH; Song, NN; Andrade Pires, FMA; Santos, AD. "Prediction of Forming Limit Diagrams for Materials with HCP Structure". ACTA METALLURGICA SINICA-ENGLISH LETTERS (2015):
10.1007/s40195-015-0344-3
Doca, T.; Andrade Pires, F.M.. "Analysis of a cylinder-to-flat contact problem at finite elasto-plastic strains". Tribology International 79 (2014): 92-98. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903208019&partnerID=MN8TOARS.
10.1016/j.triboint.2014.05.025
Gomes, V.S.; Lopes, C.S.; Pires, F.F.M.A.; Gürdal, Z.; Camanho, P.P.. "Fibre steering for shear-loaded composite panels with cutouts". Journal of Composite Materials 48 16 (2014): 1917-1926. http://www.scopus.com/inward/record.url?eid=2-s2.0-84902438267&partnerID=MN8TOARS.
10.1177/0021998313492356
Malcher, L.; Andrade Pires, F.M.; César De Sá, J.M.A.. "An extended GTN model for ductile fracture under high and low stress triaxiality". International Journal of Plasticity 54 (2014): 193-228. http://www.scopus.com/inward/record.url?eid=2-s2.0-84892795818&partnerID=MN8TOARS.
10.1016/j.ijplas.2013.08.015
Andrade, F.; De Sá, J.C.; Pires, F.A.. "Assessment and comparison of non-local integral models for ductile damage". International Journal of Damage Mechanics 23 2 (2014): 261-296. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896813128&partnerID=MN8TOARS.
10.1177/1056789513493103
Andrade, F.X.C.; Andrade Pires, F.M.; Cesar De Sa, J.M.A.. "Consistent tangent operators for implicit non-local models of integral type". Computers and Structures 141 (2014): 59-73. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903172754&partnerID=MN8TOARS.
10.1016/j.compstruc.2014.05.007
Reis, F.J.P.; Andrade Pires, F.M.. "A mortar based approach for the enforcement of periodic boundary conditions on arbitrarily generated meshes". Computer Methods in Applied Mechanics and Engineering 274 (2014): 168-191. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896286658&partnerID=MN8TOARS.
10.1016/j.cma.2014.01.029
Doca, T.; Andrade Pires, F.M.; Cesar De Sa, J.M.A.. "A frictional mortar contact approach for the analysis of large inelastic deformation problems". International Journal of Solids and Structures 51 9 (2014): 1697-1715. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896724663&partnerID=MN8TOARS.
10.1016/j.ijsolstr.2014.01.013
Araújo, M.C.; Martins, J.P.; Mirkhalaf, S.M.; Lanceros-Mendez, S.; Pires, F.M.A.; Simoes, R.. "Predicting the mechanical behavior of amorphous polymeric materials under strain through multi-scale simulation". Applied Surface Science 306 (2014): 37-46. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901189765&partnerID=MN8TOARS.
10.1016/j.apsusc.2014.03.072
Faria, H.; Andrade Pires, F.M.; Torres Marques, A.. "Modeling the rheology of SR1500 and LY556 epoxies under manufacturer's recommended cure cycles after viscosimetry and rheometry characterization". Polymer Engineering and Science 54 4 (2014): 831-839. http://www.scopus.com/inward/record.url?eid=2-s2.0-84897663848&partnerID=MN8TOARS.
10.1002/pen.23607
Nascimento, F; Vilaça, P; Miranda, R; Fernandes, JCS; Andrade Pires, FM. "Assessment of the influence process parameters in the friction stir welded mechanical and corrosion properties of AA5754 alloys". International Journal of Hybrid Information Technology (2014):
10.14257/ijhit.2014.7.4.13
Malcher, L.; Reis, F.J.P.; Andrade Pires, F.M.; César De Sá, J.M.A.. "Evaluation of shear mechanisms and influence of the calibration point on the numerical results of the GTN model". International Journal of Mechanical Sciences 75 (2013): 407-422. http://www.scopus.com/inward/record.url?eid=2-s2.0-84885139013&partnerID=MN8TOARS.
10.1016/j.ijmecsci.2013.08.008
Faria, H.; Pires, F.M.A.; Marques, A.T.. "Identification of the combined rheology of mixtures of epoxy resins with different initial curing states". Applied Rheology 23 4 (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84884264544&partnerID=MN8TOARS.
10.3933/ApplRheol-23-42413
Faria, H.; Pereira, C.M.C.; Andrade Pires, F.M.; Marques, A.T.. "Kinetic models for the SR1500 and LY556 epoxies under manufacturer's recommended cure cycles". European Polymer Journal 49 10 (2013): 3328-3336. http://www.scopus.com/inward/record.url?eid=2-s2.0-84883867692&partnerID=MN8TOARS.
10.1016/j.eurpolymj.2013.06.040
Reis, F.J.P.; Andrade Pires, F.M.. "An adaptive sub-incremental strategy for the solution of homogenization-based multi-scale problems". Computer Methods in Applied Mechanics and Engineering 257 (2013): 164-182. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874768274&partnerID=MN8TOARS.
10.1016/j.cma.2013.01.003
Melro, A.R.; Camanho, P.P.; Andrade Pires, F.M.; Pinho, S.T.. "Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part I-Constitutive modelling". International Journal of Solids and Structures 50 11-12 (2013): 1897-1905. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876120080&partnerID=MN8TOARS.
10.1016/j.ijsolstr.2013.02.009
Melro, A.R.; Camanho, P.P.; Andrade Pires, F.M.; Pinho, S.T.. "Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part II-Micromechanical analyses". International Journal of Solids and Structures 50 11-12 (2013): 1906-1915. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876112027&partnerID=MN8TOARS.
10.1016/j.ijsolstr.2013.02.007
Malcher, L.; Andrade Pires, F.M.; César De Sá, J.M.A.. "An assessment of isotropic constitutive models for ductile fracture under high and low stress triaxiality". International Journal of Plasticity 30-31 (2012): 81-115. http://www.scopus.com/inward/record.url?eid=2-s2.0-84857036724&partnerID=MN8TOARS.
10.1016/j.ijplas.2011.10.005
Melro, A.R.; Camanho, P.P.; Andrade Pires, F.M.; Pinho, S.T.. "Numerical simulation of the non-linear deformation of 5-harness satin weaves". Computational Materials Science 61 (2012): 116-126. http://www.scopus.com/inward/record.url?eid=2-s2.0-84860338488&partnerID=MN8TOARS.
10.1016/j.commatsci.2012.04.010
de Mello, RA; Pires, FS; Marques, DS; Oliveira, J; Rodrigues, A; Soares, M; Azevedo, I; et al. "EGFR exon mutation distribution and outcome in non-small-cell lung cancer: a Portuguese retrospective study". TUMOR BIOLOGY (2012):
10.1007/s13277-012-0465-5
Seabra, M.R.R.; de Sa, J.M.A.C.; Andrade, F.X.C.; Pires, F.F.M.A.. "Continuous-discontinuous formulation for ductile fracture". International Journal of Material Forming 4 3 (2011): 271-281. http://www.scopus.com/inward/record.url?eid=2-s2.0-80051927606&partnerID=MN8TOARS.
10.1007/s12289-010-0991-x
Malcher, L.; Andrade Pires, F.M.; César De Sá, J.M.A.. "A micromechanical constitutive model for ductile fracture: Numerical treatment and calibration strategy". Computational Plasticity XI - Fundamentals and Applications, COMPLAS XI (2011): 66-79. http://www.scopus.com/inward/record.url?eid=2-s2.0-84858981475&partnerID=MN8TOARS.
Doca, T.; Andrade Pires, F.M.; César De Sá, J.M.A.. "A dual mortar-based contact formulation applied to finite plastic strains - COMPLAS XI". Computational Plasticity XI - Fundamentals and Applications, COMPLAS XI (2011): 953-964. http://www.scopus.com/inward/record.url?eid=2-s2.0-84858957868&partnerID=MN8TOARS.
Mirkhalaf, M.; Pires, F.; Simões, R.. "An efficient numerical integration algorithm for the single mode compressible Leonov model - Complas XI". Computational Plasticity XI - Fundamentals and Applications, COMPLAS XI (2011): 841-851. http://www.scopus.com/inward/record.url?eid=2-s2.0-84858979439&partnerID=MN8TOARS.
Andrade, F.X.C.; César De Sá, J.M.A.; Andrade Pires, F.M.. "A ductile damage nonlocal model of integral-type at finite strains: Formulation and numerical issues". International Journal of Damage Mechanics 20 4 (2011): 515-557. http://www.scopus.com/inward/record.url?eid=2-s2.0-79957466971&partnerID=MN8TOARS.
10.1177/1056789510386850
Reis, F.J.P.; Malcher, L.; Pires, F.M.A.; De Sá, J.M.A.C.. "A comparison of shear mechanisms for the prediction of ductile failure under low stress triaxiality". International Journal of Structural Integrity 1 4 (2010): 314-331. http://www.scopus.com/inward/record.url?eid=2-s2.0-79954990041&partnerID=MN8TOARS.
10.1108/17579861011099150
Andrade, F.X.C.; Pires, F.M.A.; de Sá, J.M.A.C.; Malcher, L.. "Improvement of the numerical prediction of ductile failure with an integral nonlocal damage model". International Journal of Material Forming 2 SUPPL. 1 (2009): 439-442. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956122171&partnerID=MN8TOARS.
10.1007/s12289-009-0523-8
Malcher, L.; Pires, F.M.A.; de Sá, J.M.A.C.; Andrade, F.X.C.. "Numerical integration algorithm of a new model for metal plasticity and fracture including pressure and lode angle dependence". International Journal of Material Forming 2 SUPPL. 1 (2009): 443-446. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856059408&partnerID=MN8TOARS.
10.1007/s12289-009-0525-6
Andrade, F.X.C.; César De Sá, J.M.A.; Pires, F.M.A.; Malcher, L.. "Nonlocal formulations for lemaitre's ductile damage model". Computational Plasticity X - Fundamentals and Applications (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-84859143502&partnerID=MN8TOARS.
Malcher, L.; Pires, F.M.A.; César De Sá, J.M.A.; Andrade, F.X.C.. "Comparative study between ductile damage constitutive models". Computational Plasticity X - Fundamentals and Applications (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-84859134322&partnerID=MN8TOARS.
Seabra, M.R.R.; César De Sá, J.M.A.; Pires, F.F.M.A.; Andrade, F.X.C.. "Modelling of ductile fracture". Computational Plasticity X - Fundamentals and Applications (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-84859118425&partnerID=MN8TOARS.
Teixeira, P.; Santos, A.D.; de Sá, J.M.A.C.; Pires, F.M.A.; da Rocha, A.B.. "Sheet metal formability evaluation using continuous Damage Mechanics". International Journal of Material Forming 2 SUPPL. 1 (2009): 463-466. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856040314&partnerID=MN8TOARS.
10.1007/s12289-009-0595-5
Teixeira, P.; Santos, A.D.; de Sá, J.M.A.C.; Pires, F.M.A.. "Evaluation of ductile failure in sheet metal forming using a damage model". Steel Research International 79 2 (2008): 397-400. http://www.scopus.com/inward/record.url?eid=2-s2.0-84898473357&partnerID=MN8TOARS.
Teixeira, P.; Santos, A.D.; Andrade Pires, F.M.; César de Sá, J.M.A.. "Finite element prediction of ductile fracture in sheet metal forming processes". Journal of Materials Processing Technology 177 1-3 (2006): 278-281. http://www.scopus.com/inward/record.url?eid=2-s2.0-33745867271&partnerID=MN8TOARS.
10.1016/j.jmatprotec.2006.04.059
de Souza Neto, E.A.; Andrade Pires, F.M.; Owen, D.R.J.. "F-bar-based linear triangles and tetrahedra for finite strain analysis of nearly incompressible solids. Part I: Formulation and benchmarking". International Journal for Numerical Methods in Engineering 62 3 (2005): 353-383. http://www.scopus.com/inward/record.url?eid=2-s2.0-11944251074&partnerID=MN8TOARS.
10.1002/nme.1187
Owen, D.R.J.; Feng, Y.T.; de Souza Neto, E.A.; Cottrell, M.G.; Wang, F.; Pires, F.M.A.; Yu, J.. "The modelling of multi-fracturing solids and particulate media". International Journal for Numerical Methods in Engineering 60 1 (2004): 317-339. http://www.scopus.com/inward/record.url?eid=2-s2.0-2342506665&partnerID=MN8TOARS.
10.1002/nme.964
Pires, F.M.A.; de Souza Neto, E.A.; de la Cuesta Padilla, J.L.. "An assessment of the average nodal volume formulation for the analysis of nearly incompressible solids under finite strains". Communications in Numerical Methods in Engineering 20 7 (2004): 569-583. http://www.scopus.com/inward/record.url?eid=2-s2.0-3242698064&partnerID=MN8TOARS.
10.1002/cnm.697
Andrade Pires, F.M.; de Souza Neto, E.A.; Owen, D.R.J.. "On the finite element prediction of damage growth and fracture initiation in finitely deforming ductile materials". Computer Methods in Applied Mechanics and Engineering 193 48-51 (2004): 5223-5256. http://www.scopus.com/inward/record.url?eid=2-s2.0-8644274609&partnerID=MN8TOARS.
10.1016/j.cma.2004.01.038
Pires, F.M.A.; De Sá, J.M.A.C.; Sousa, L.C.; Jorge, R.M.N.. "Numerical modelling of ductile plastic damage in bulk metal forming". International Journal of Mechanical Sciences 45 2 (2003): 273-294. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038625321&partnerID=MN8TOARS.
10.1016/S0020-7403(03)00051-1

Capítulo de livro

Andrade Pires, FM. "Fast Homogenization through Clustering-based Reduced Order Modeling". In Special Volume on "Fundamentals of Multiscale Modeling of Structural Materials", 113-168. Estados Unidos: Elsevier, 2023.
Publicado
Rodrigues, DES; Belinha, J; Pires, FMA; Jorge, RMN; Dinis, LMJS. "Homogenizing the Elastic Properties of Composite Material Using the NNRPIM". 2021.
10.1016/b978-0-12-819724-0.00087-2
Doca, T.; Pires, F.M.A.. "Frictional Mortar Formulation for Large Inelastic Deformation Problems". 2018.
10.1142/9781786344786_0001
Farahani, B.V.; Belinha, J.; Andrade Pires, F.M.; Moreira, P.M.G.P.. "The simulation of concrete materials using a damage model combined with an advanced discretization meshless technique". 249-303. 2017.
De Sa, J.M.A.C.; Pires, F.M.A.; Seabra, M.R.R.; Andrade, F.X.C.; Malcher, L.. "Ductile failure modeling: Stress dependence, non-locality and damage to fracture transition". 2015.
10.1007/978-1-4614-5589-9
Correia, A.; Mohsen Valashani, S.; Pires, F.; Simoes, R.. "Modelling the mechanical behavior of polymer-based nanocomposites". 2013.
10.4028/www.scientific.net/MSF.730-732.543
Wu, S.H.; Reis, A.; Andrade Pires, F.M.; Santos, A.D.; Barata Da Rocha, A.. "Study of tool trajectory in incremental forming". 2012.
10.4028/www.scientific.net/amr.472-475.1586
de Almeida César de Sá, J.M.; Pires, F.M.A.; Andrade, F.X.C.. "Local and Nonlocal Modeling of Ductile Damage". 2010.
10.1002/9783527632312.ch2
Owen, D.R.J.; Andrade Pires, F.M.; De Souza Neto, E.A.. "A computational model for viscoplasticity coupled with damage including unilateral effects". 2007.
10.1007/978-1-4020-6577-4_9

Outros

Outra produção

Unlocking the Potential of Second-order Computational Homogenisation: An Overview of Distinct Formulations and a Guide for their Implementation. 2021. Lopes, IAR; Pires, FMA.
10.1007/s11831-021-09611-9
Computational methods in multi-scale, multi-uncertainty and multi-physics problems. 2021. Pires, FMA; Li, CF.
10.1108/ec-04-2021-758

Atividades

Apresentação oral de trabalho

	Título da apresentação	Nome do evento Anfitrião (Local do evento)
2023/01/06	Multiscale Modelling of Deformation and Fracture of Transformation Induced Plasticity Alloys	ICPDF 2023: International Conference on Plasticity, Damage, and Fracture (Punta Cana, República Dominicana)
2021/07/19	Multiscale Modelling of Multi-Phase Alloys with Higher Order Formulations	First Internatio nal Conference on Computations for Science and Engineering Faculty of Engineering, University of Porto (Portugal)
2020/09/01	Modelling of Composite Materials with Higher Order Multiscale Models	ICCS23 - 23rd In- ternational Conference on Composite Structures & MECHCOMP6 - 6th International Conference on Mechanics of Composites (Portugal)
2019/09/03	Multiscale Modelling and Analysis of Multi-phase Alloys	XV International Conference on Computational Plasticity. Fundamentals and Appli- cations CIMNE (Barcelona, Espanha)
2019/01/03	Multiscale Analysis of Multi-phase Alloys	ICPDF 2019: International Con- ference on Plasticity, Damage, and Fracture (Panamá)
2018/01/05	Analysis of the Deformation Behaviour of Polycristalline Materials with Mul- tiscale Based Models	International Conference on Plasticity, Damage, and Fracture (Estados Unidos)
2017/01/06	Analysis of the Yielding Behaviour of Ductile Materials with an Homogenization- Based Multiscale Approach	International Conference on Plasticity, Damage, and Fracture (México)

Orientação

	Título / Tema Papel desempenhado	Curso (Tipo) Instituição / Organização
2022 - 2026	Variationally consistent multiscale homogenisation of contact between rough surfaces: formulation, implementation, and analysis Orientador	Engenharia Mecânica (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2022 - 2025	Composite Bayesian Optimisation for Data-Driven Design and Analysis of Polycrystalline Materials Orientador	Engenharia Mecânica (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2022 - 2025	Multi-Scale Modeling and Design of PC/ABS Polymer Blends: Integrating Constitutive Modeling with Bayesian Optimization for Inverse Problem Solutions Orientador	Engenharia Mecânica (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2024 - 2024	Computational techniques towards robust and stable implicit contact dynamics finite element simulations Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2024 - 2024	Data-driven Design and Optimisation of Mechanical Metamaterials Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2020 - 2024	Accurate and efficient multi-scale analyses of nonlinear heterogeneous materials based on clustering-based reduced order models Orientador	Engenharia Mecânica (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2020 - 2024	Computational Framework for the Multi-Scale Analysis of Plasticity and Intergranular Fracture in Multiphase Alloys Orientador	Engenharia Mecânica (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2023 - 2023	Multiscale modeling of advanced discontinuous fiber-reinforced composites Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2023 - 2023	Multi-scale Modelling and Analysis of the Behaviour of PC/ABS Blends with Emphasis on Interfacial/Bulk Damage Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2018 - 2022	Finite deformation contact modelling at different scales based on dual mortar methods Orientador	Engenharia Mecânica (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2021 - 2021	Impact of topography on rough contact by computational homogenization Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2017 - 2021	Deformation Behaviour of Semi Crystalline Polymers under Different Stress States Orientador	Líderes para Indústrias Tecnológicas (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2016 - 2021	Multi-Scale Modelling and Analysis of Multi-Phase Solids Using Second-Order Computational Homogenisation at Finite Strains with Parallel Computing Orientador	Engenharia Mecânica (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2020 - 2020	Proper and efficient sampling of an input space for the design of advanced multi-scale heterogeneous materials Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2020 - 2020	Computational efficient generation of microstructures towards the design of advanced multi-scale heterogeneous materials Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2020 - 2020	Experimental and Numerical investigation of the compressive behaviour of polymer blends at high strain rates Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2019 - 2019	Modeling and Analysis of Rough Contact by Computational Homogenization Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2019 - 2019	Ductile Failure Analysis in Metallic Materials through Computational Homogenization Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2018 - 2018	An Assessment of the Principle of Separation of Scales in Coupled Multi-Scale Finite Element Analyses Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2018 - 2018	Numerical Micromechanical Analysis on the Influence of Monocrystalline Parameters on the Elastic and Yielding Response of Polycrystalline Aggregates Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2017 - 2017	Avaliação da Precisão de um Modelo de Dano Contínuo através de um Modelo Multi-escala baseado em Homogeneização Computacional Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2017 - 2017	Optimização de estudos reológicos Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2016 - 2016	Computational Framework for Multi-Scale Analysis of Heterogeneous Materials us- ing Digital Image Recognition Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2016 - 2016	Mastro articulado para aplicações espaciais - estudo cinemático e físico Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2016 - 2016	Numerical Modelling of Amorphous Polymers: Formulation and Implementation Orientador	Engenharia Mecânica (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2015 - 2015	Simulação numérica de ligações estruturais em protecções térmicas para satélites Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2015 - 2015	Análise do comportamento elasto-plástico de materiais dúcteis baseada em homogeneização computacional Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2015 - 2015	Simulação numérica de transferência de calor (radiação, condução) em proteções térmicas Orientador	Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2014 - 2014	A constitutive model for polymers: Formulation and Integration algorithm Orientador	Engenharia Matemática (Mestrado) Universidade do Porto Faculdade de Ciências, Portugal
2013 - 2013	Smart Seat Design - An integrated approach for product development in automotive industry Orientador	Líderes para Indústrias Tecnológicas (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2011 - 2011	Multi-Scale Modelling and Analysis of Heterogeneous Solids at Finite Strains Orientador	Engenharia Mecânica (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2011 - 2011	Computational Generation and Homogenization of Random Close Packed Materials Orientador	Engenharia Mecânica (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2011 - 2011	Modelling and analysis of polymers at different scales Orientador	Engenharia Mecânica (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2010 - 2010	Continuum modelling and numerical simulation of hexagonal close-packed materials Orientador	Engenharia Mecânica (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2010 - 2010	Energy wear methods for dual-mortar contact analysis of frictional problems at finite inelastic strains Orientador	Engenharia Mecânica (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal
2009 - 2009	Continuum Modelling and Numerical Simulation of Damage for Ductile Materials Orientador	Engenharia Mecânica (Doutoramento) Universidade do Porto Faculdade de Engenharia, Portugal

Distinções

Prémio

2018	Emerald Literati Award 2019 Highly Commended Paper Emerald Group Publishing Pty Ltd, Austrália

Outra distinção

2014	Young Researcher in Computational and Applied Mechanics 2013 Associação Portuguesa de Mecânica Teórica Aplicada e Computacional, Portugal
2013	Best Paper Award
2010	Education Innovation Award Fundação Luso-Americana, Portugal
2006	Best PhD Thesis in 2005 in Computational Mechanics