???global.info.a_carregar???
Matthias Thürer. Completed the Mestrado integrado in Mechanical Engineering in 2009/08/31 by Technische Universität Berlin and Doutoramento in Mechanical Engineering in 2011/08/01 by Universidade de Coimbra. Is Full Professor in Jinan University. Published 110 articles in journals. Has 2 section(s) of books and 6 book(s). Organized 4 event(s). Supervised 3 PhD thesis(es). Supervised 4 MSc dissertation(s). Has received 7 awards and/or honors. Participates and/or participated as Post-doc Fellow in 1 project(s), Principal investigator in 4 project(s) and Researcher in 1 project(s). Works in the area(s) of Engineering and Technology and Social Sciences with emphasis on Economics and Business with emphasis on Business and Management.
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Matthias Thürer

Nomes de citação

  • Thürer, Matthias

Identificadores de autor

Ciência ID
0119-BF14-12A1
ORCID iD
0000-0002-2705-969X
Researcher Id
C-3049-2015
Scopus Author Id
35811259700

Websites

Domínios de atuação

  • Ciências da Engenharia e Tecnologias
  • Ciências Sociais - Economia e Gestão - Organização e Gestão de Empresas

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Alemão (Idioma materno)
Inglês Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2)
Português Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2)
Formação
Grau Classificação
2011/11/01 - 2014/10/31
Concluído
 Production Engineering (Pós-doutoramento)
Universidade Federal de São Carlos, Brasil
2009/09/01 - 2011/08/01
Concluído
 Mechanical Engineering (Doutoramento)
Especialização em Operations Management
Universidade de Coimbra, Portugal
2003/10/01 - 2009/08/31
Concluído
 Mechanical Engineering (Mestrado integrado)
Technische Universität Berlin, Alemanha
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento 		Empregador
2014/11/01 - Atual Professor Catedrático (Docente Universitário) Jinan University, China
Jinan University - School of Intelligent Systems Science and Engineering, China
Projetos

Bolsa

Designação Financiadores
2011/11/01 - 2014/10/31 Proposta de Sistema de Apoio à Decisão baseado no Workload Control (WLC) para o Planejamento e Controle da Produção de pequenas e médias empresas
2011/10605-1
Bolseiro de Pós-Doutoramento
Fundação de Amparo à Pesquisa do Estado de São Paulo
Concluído

Projeto

Designação Financiadores
2022/01/01 - 2022/12/31 Proactive Digital Twin based Material Flow Diagnosis and Control
72150610504
Investigador responsável
National Natural Science Foundation of China
Em curso
2019/01/01 - 2022/12/31 On Factory Physics: Buffer Flexibility
71872072
Investigador responsável
National Natural Science Foundation of China
Em curso
2019/01/01 - 2022/12/31 Digital Twin Control Architecture Based Opti-state Online Control Mechanisms and Methods for Synchronized Production Operation Systems
51875251
Investigador
National Natural Science Foundation of China
Em curso
2018/01/01 - 2019/12/31 The Key to successful Manufacturing Strategy: Production Control
71750410694
Investigador responsável
National Natural Science Foundation of China
Concluído
2016/01/01 - 2017/12/31 The Key to successful Manufacturing Strategy: Deconstructing Hoshin Kanri
71550110254
Investigador responsável
National Natural Science Foundation of China
Produções

Publicações

Artigo em conferência
  1. Romero, D.; Gaiardelli, P.; Wuest, T.; Powell, D.; Thürer, M.. "New Forms of Gemba Walks and Their Digital Tools in the Digital Lean Manufacturing World". 2020.
    10.1007/978-3-030-57997-5_50
  2. Fernandes, N.O.; Thürer, M.; Mirzaei, N.; Ferreira, L.P.; Silva, F.J.G.; Carmo-Silva, S.. "POLCA Control in two-stage production systems". 2020.
    10.1016/j.promfg.2020.10.207
  3. Maganha, I.; Silva, C.; Ferreira, L. M. D. F.; Thurer, M.; Frazzon, E. M.; Silvestri, M.. "Proposal of a Reconfigurability Index Using Analytic Network Process". 2019.
    10.1109/IEEM44572.2019.8978532
  4. Huang, J.; Li, S.; Thürer, M.. "On the use of blockchain in industrial product service systems: A critical review and analysis". 2019.
    10.1016/j.procir.2019.03.117
  5. Zhang, H.; Ma, L.; Sun, J.; Lin, H.; Thürer, M.. "Digital twin in services and industrial product service systems: Review and analysis". 2019.
    10.1016/j.procir.2019.02.131
  6. Romero, D.; Gaiardelli, P.; Powell, D.; Wuest, T.; Thürer, M.. "Rethinking jidoka systems under automation & learning perspectives in the digital lean manufacturing world". 2019.
    10.1016/j.ifacol.2019.11.309
  7. Nie, D.X.; Yan, Z.J.; Qu, T.; Thurer, M.; Wang, M.L.; Li, C.D.; Huang, G.Q.. "Optimal configuration of multi-period assembly supply chains with uncertain demand in an industrial cluster based on analytical target cascading". 2017.
Artigo em revista
  1. Haeussler, S.; Neuner, P.; Thürer, M.. "Balancing earliness and tardiness within workload control order release: an assessment by simulation". Flexible Services and Manufacturing Journal (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85122193083&partnerID=MN8TOARS.
    10.1007/s10696-021-09440-9
  2. Pär Åhlström; Pamela Danese; Peter Hines; Torbjørn H. Netland; Daryl Powell; Rachna Shah; Matthias Thürer; Desirée H. van Dun. "Is lean a theory? Viewpoints and outlook". International Journal of Operations & Production Management ahead-of-p ahead-of-p (2021): https://doi.org/10.1108/IJOPM-06-2021-0408.
    10.1108/IJOPM-06-2021-0408
  3. Yuan Huang; Daniel R. Eyers; Mark Stevenson; Matthias Thürer. "Breaking the mould: achieving high-volume production output with additive manufacturing". International Journal of Operations & Production Management ahead-of-p ahead-of-p (2021): https://doi.org/10.1108/IJOPM-05-2021-0350.
    10.1108/IJOPM-05-2021-0350
  4. Matthias Thürer; Mark Stevenson. "Material handling and order release control in high-variety make-to-order shops: an assessment by simulation". Operations Management Research (2021): https://doi.org/10.1007/s12063-021-00229-5.
    10.1007/s12063-021-00229-5
  5. Tortorella, Guilherme; Sawhney, Rapinder; Jurburg, Daniel; de Paula, Istefani Carisio; Tlapa, Diego; Thurer, Matthias. "Towards the proposition of a Lean Automation framework Integrating Industry 4.0 into Lean Production". Journal of Manufacturing Technology Management (2021): https://publons.com/publon/31750254/.
    10.1108/JMTM-01-2019-0032
  6. Thurer, Matthias; Fernandes, Nuno O.; Stevenson, Mark; Qu, Ting; Huang, George Q.. "Self-Organizing Material Flow Control using Smart Products: An Assessment by Simulation". Journal of Industrial and Production Engineering (2021): https://publons.com/publon/42032347/.
    10.1080/21681015.2021.1883136
  7. Thurer, Matthias; Ma, Lin; Stevenson, Mark; Roser, Christoph. "Bottleneck detection in high-variety make-to-Order shops with complex routings: an assessment by simulation". Production Planning and Control (2021): https://publons.com/publon/34055292/.
    10.1080/09537287.2021.1885795
  8. Land, Martin J.; Thurer, Matthias; Stevenson, Mark; Fredendall, Lawrence D.; Scholten, Kirstin; Land, M.J.; Thürer, M.; et al. "Inventory diagnosis for flow improvement-A design science approach". Journal of Operations Management 67 5 (2021): 560-587. https://publons.com/publon/37737517/.
    10.1002/JOOM.1133
  9. Thürer, M.; Stevenson, M.; Thuerer, Matthias; Stevenson, Mark. "Improving superfluous load avoidance release (SLAR): A new load-based SLAR mechanism". International Journal of Production Economics 231 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85088374017&partnerID=MN8TOARS.
    10.1016/j.ijpe.2020.107881
  10. Thürer, M.; Stevenson, M.. "Order release, dispatching and resource assignment in multiple resource-constrained job shops: an assessment by simulation". International Journal of Production Research (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85106513555&partnerID=MN8TOARS.
    10.1080/00207543.2021.1930240
  11. Sun, J.; Qu, T.; Nie, D.; Thürer, M.; Li, C.; Huang, G.. "Location-inventory problem of dual-channel multi-echelon distribution network,¿¿¿¿¿¿¿¿¿¿¿-¿¿¿¿". Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS 27 11 (2021): 3305-3317. http://www.scopus.com/inward/record.url?eid=2-s2.0-85120857233&partnerID=MN8TOARS.
    10.13196/j.cims.2021.11.023
  12. Tortorella, G.L.; Narayanamurthy, G.; Thurer, M.; Tortorella, Guilherme Luz; Narayanamurthy, Gopalakrishnan; Thurer, Matthias. "Identifying pathways to a high-performing lean automation implementation: An empirical study in the manufacturing industry". International Journal of Production Economics 231 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85092904978&partnerID=MN8TOARS.
    10.1016/j.ijpe.2020.107918
  13. Fernandes, N.O.; Thürer, M.; Stevenson, M.. "On the integration of card-allocation and dispatching decisions in POLCA systems: an assessment by simulation". Production Planning and Control (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85118298558&partnerID=MN8TOARS.
    10.1080/09537287.2021.1995635
  14. Subramaniyan, M.; Skoogh, A.; Bokrantz, J.; Sheikh, M.A.; Thürer, M.; Chang, Q.. "Artificial intelligence for throughput bottleneck analysis – State-of-the-art and future directions". Journal of Manufacturing Systems 60 (2021): 734-751. http://www.scopus.com/inward/record.url?eid=2-s2.0-85113630024&partnerID=MN8TOARS.
    10.1016/j.jmsy.2021.07.021
  15. Fernando José Gómez Paredes; Moacir Godinho Filho; Matthias Thürer; Nuno O. Fernandes; Charbel José Chiappeta Jabbour; Gomez Paredes, Fernando Jose; Godinho Filho, Moacir; et al. "Factors for choosing production control systems in make-to-order shops: a systematic literature review". Journal of Intelligent Manufacturing (2020): https://doi.org/10.1007/s10845-020-01673-z.
    10.1007/s10845-020-01673-z
  16. Matthias Thürer; Rosanna Cole; Mark D. Hanna; Charles W. Protzman; Thürer, Matthias. "Classroom Simulations for Teaching Production Control in Nonrepetitive Contexts: Insights for Theory and Practice". Decision Sciences Journal of Innovative Education 18 4 (2020): 568-588. https://doi.org/10.1111/dsji.12223.
    10.1111/dsji.12223
  17. Matthias Thürer; Mark Stevenson; James Aitken; Cristovao Silva; Thurer, Matthias; Stevenson, Mark; Aitken, James; Silva, Cristovao. "State-dependent service rates in make-to-order shops: an assessment by simulation". Operations Management Research 13 1-2 (2020): 70-84. https://doi.org/10.1007/s12063-020-00149-w.
    10.1007/s12063-020-00149-w
  18. Thurer, Matthias; Zhang, Haiwen; Stevenson, Mark; Costa, Federica; Ma, Lin. "Worker assignment in dual resource constrained assembly job shops with worker heterogeneity: an assessment by simulation". International Journal of Production Research (2020): https://publons.com/publon/21070770/.
    10.1080/00207543.2019.1677963
  19. Fernandes, Nuno O.; Thurer, Matthias; Pinho, Tatiana M.; Torres, Pedro; Carmo-Silva, Silvio. "Workload control and optimised order release: an assessment by simulation". International Journal of Production Research (2020): https://publons.com/publon/28214048/.
    10.1080/00207543.2019.1630769
  20. Thurer, Matthias; Huang, Yuan; Stevenson, Mark. "Workload control in additive manufacturing shops where post-processing is a constraint: an assessment by simulation". International Journal of Production Research (2020): https://publons.com/publon/29396345/.
    10.1080/00207543.2020.1761038
  21. Tang, Yongli; Hu, Xinyue; Petti, Claudio; Thurer, Matthias; Tang, Y.; Hu, X.; Petti, C.; Thürer, M.. "Institution-driven innovation in Guangdong firms: Moderating effects of in-house formal R&D and industrial environment turbulence". Science and Public Policy 47 2 (2020): 194-206. https://publons.com/publon/35993103/.
    10.1093/SCIPOL/SCZ058
  22. Thurer, Matthias; Tomasevic, Ivan; Stevenson, Mark; Blome, Constantin; Melnyk, Steven; Chan, Hing Kai; Huang, George Q.. "A systematic review of China's belt and road initiative: implications for global supply chain management". International Journal of Production Research (2020): https://publons.com/publon/25210800/.
    10.1080/00207543.2019.1605225
  23. Thurer, Matthias; Ma, Lin; Stevenson, Mark. "Workload Control order release in general and pure flow shops with limited buffer size induced blocking: an assessment by simulation". International Journal of Production Research (2020): https://publons.com/publon/27933668/.
    10.1080/00207543.2020.1735667
  24. Veloso Saes, Elizangela; Godinho Filho, Moacir; Thurer, Matthias; Chiappetta Jabbour, Charbel Jose; Lopes de Sousa Jabbour, Ana Beatriz; Carraro, Nilton Cezar; Oprime, Pedro Carlos. "Manufacturing strategy in small firms: unveiling the drivers of strategic consensus". Production Planning and Control (2020): https://publons.com/publon/35430716/.
    10.1080/09537287.2020.1821401
  25. Fernandes, Nuno O.; Thurer, Matthias; Stevenson, Mark. "Direct Workload Control: simplifying continuous order release". International Journal of Production Research (2020): https://publons.com/publon/32503442/.
    10.1080/00207543.2020.1857451
  26. Tang, Yongli; Hu, Xinyue; Petti, Claudio; Thurer, Matthias. "Institutional incentives and pressures in Chinese manufacturing firms' innovation". Management Decision (2020): https://publons.com/publon/31750252/.
    10.1108/MD-08-2018-0933
  27. Thurer, Matthias; Fernandes, Nuno O.; Stevenson, Mark. "Production planning and control in multi-stage assembly systems: an assessment of Kanban, MRP, OPT (DBR) and DDMRP by simulation". International Journal of Production Research (2020): https://publons.com/publon/32643854/.
    10.1080/00207543.2020.1849847
  28. Bagni, Gustavo; Godinho Filho, Moacir; Thurer, Matthias; Stevenson, Mark. "Systematic review and discussion of production control systems that emerged between 1999 and 2018". Production Planning and Control (2020): https://publons.com/publon/31750253/.
    10.1080/09537287.2020.1742398
  29. Sílvio Carmo-Silva; Nuno Fernandes; Matthias Thürer; Luís Pinto Ferreira. "Extending the POLCA production control system with centralized job release". Production 30 (2020): https://doi.org/10.1590/0103-6513.20190159.
    10.1590/0103-6513.20190159
  30. Borges, G.A.; Tortorella, G.L.; Martínez, F.; Thurer, M.. "Simulation-based analysis of lean practices implementation on the supply chain of a public hospital". Production 30 (2020): 1-16. http://www.scopus.com/inward/record.url?eid=2-s2.0-85090008502&partnerID=MN8TOARS.
    10.1590/0103-6513.20190131
  31. Renna, P.; Thürer, M.; Stevenson, M.; Renna, Paolo; Thurer, Matthias; Stevenson, Mark. "A game theory model based on Gale-Shapley for dual-resource constrained (DRC) flexible job shop scheduling". International Journal of Industrial Engineering Computations 11 2 (2020): 173-184. http://www.scopus.com/inward/record.url?eid=2-s2.0-85083525949&partnerID=MN8TOARS.
    10.5267/j.ijiec.2019.11.001
  32. Thürer, M.; Fernandes, N.O.; Stevenson, M.; Thurer, Matthias; Fernandes, Nuno O.; Stevenson, Mark. "Material Flow Control in High-Variety Make-to-Order Shops: Combining COBACABANA and POLCA". Production and Operations Management 29 9 (2020): 2138-2152. http://www.scopus.com/inward/record.url?eid=2-s2.0-85087182451&partnerID=MN8TOARS.
    10.1111/poms.13218
  33. Portioli-Staudacher, A.; Costa, F.; Thürer, M.; Portioli-Staudacher, Alberto; Costa, Federica; Thurer, Matthias. "The use of labour flexibility for output control in workload controlled flow shops: A simulation analysis". International Journal of Industrial Engineering Computations 11 3 (2020): 429-442. http://www.scopus.com/inward/record.url?eid=2-s2.0-85081559616&partnerID=MN8TOARS.
    10.5267/j.ijiec.2019.11.004
  34. Fan, J.; Wang, G.; Thürer, M.; Thürer, Matthias. "Approximation Algorithms for a New Truck Loading Problem in Urban Freight Transportation". Transportation Science 54 3 (2020): 690-702. http://www.scopus.com/inward/record.url?eid=2-s2.0-85091019112&partnerID=MN8TOARS.
    10.1287/trsc.2019.0967
  35. Fernandes, Nuno O.; Thurer, Matthias; Stevenson, Mark; Carmo-Silva, Silvio. "Lot synchronization in make-to-order shops with order release control: an assessment by simulation". International Journal of Production Research (2019): https://publons.com/publon/18070712/.
    10.1080/00207543.2019.1685701
  36. Thurer, Matthias; Maschek, Thomas; Fredendall, Lawrence; Gianiodis, Peter; Stevenson, Mark; Deuse, Jochen. "On the integration of manufacturing strategy: deconstructing Hoshin Kanri". Management Research Review (2019): https://publons.com/publon/208889/.
    10.1108/MRR-04-2018-0178
  37. Thurer, Matthias; Stevenson, Mark. "The use of finite loading to guide short-term capacity adjustments in make-to-order job shops: an assessment by simulation". International Journal of Production Research (2019): https://publons.com/publon/5166386/.
    10.1080/00207543.2019.1630771
  38. Thurer, Matthias; Fernandes, Nuno O.; Stevenson, Mark. "Parts feeding in two-stage assembly system: an assessment by simulation". Journal of Industrial and Production Engineering (2019): https://publons.com/publon/28402823/.
    10.1080/21681015.2019.1695152
  39. Thuerer, Matthias; Fernandes, Nuno O.; Stevenson, Mark; Silva, Cristovao; Carmo-Silva, Silvio; Thürer, M.; Fernandes, N.O.; et al. "POLC-A: an assessment of POLCA's authorization element". Journal of Intelligent Manufacturing 30 6 (2019): 2435-2447. https://publons.com/publon/28402821/.
    10.1007/S10845-018-1402-2
  40. Thurer, M.; Pan, Y. H.; Qu, T.; Luo, H.; Li, C. D.; Huang, G. Q.; Thürer, M.; et al. "Internet of Things (IoT) driven kanban system for reverse logistics: solid waste collection". Journal of Intelligent Manufacturing 30 7 (2019): 2621-2630. https://publons.com/publon/28402822/.
    10.1007/S10845-016-1278-Y
  41. Farooque, Muhammad; Zhang, Abraham; Thurer, Matthias; Qu, Ting; Huisingh, Donald; Farooque, M.; Zhang, A.; et al. "Circular supply chain management: A definition and structured literature review". Journal of Cleaner Production 228 (2019): 882-900. https://publons.com/publon/20380916/.
    10.1016/J.JCLEPRO.2019.04.303
  42. Thuerer, Matthias; Stevenson, Mark; Land, Martin J.; Fredendall, Larry D.. "On the combined effect of due date setting, order release, and output control: an assessment by simulation". International Journal of Production Research (2019): https://publons.com/publon/25210799/.
    10.1080/00207543.2018.1504250
  43. Thurer, Matthias; Fernandes, Nuno O.; Ziengs, Nick; Stevenson, Mark. "On the meaning of ConWIP cards: an assessment by simulation". Journal of Industrial and Production Engineering (2019): https://publons.com/publon/20229770/.
    10.1080/21681015.2019.1576784
  44. Zhang, Haiwen; Ma, Lin; Sun, Jiao; Lin, Hansheng; Thurer, Matthias. "Digital Twin in Services and Industrial Product Service Systems:: Review and Analysis". Procedia CIRP (2019): https://publons.com/publon/35993105/.
    10.1016/J.PROCIR.2019.02.131
  45. Thürer, Matthias. "On the Use of Blockchain in Industrial Product Service Systems: A critical Review and Analysis". Procedia CIRP (2019): https://publons.com/publon/35993107/.
    10.1016/J.PROCIR.2019.03.117
  46. Matthias Thürer; Mark Stevenson; Paolo Renna. "Workload control in dual-resource constrained high-variety shops: an assessment by simulation". International Journal of Production Research (2019): https://publons.com/publon/20133977/.
    10.1080/00207543.2018.1497313
  47. Matthias Thürer; Nuno O. Fernandes; Mark Stevenson; Ting Qu; Cong Dong Li. "Centralised vs. decentralised control decision in card-based control systems: comparing kanban systems and COBACABANA". International Journal of Production Research (2019): https://publons.com/publon/20133976/.
    10.1080/00207543.2018.1425018
  48. Fernandes, Nuno O.; Thurer, Matthias; Ferreira, Luis Pinto; Carmo-Silva, S.; Fernandes, N.O.; Thürer, M.; Ferreira, L.P.. "POLCA: Centralised vs. Decentralised Job Release". Ifac Papersonline (2019): 1427-1431. https://publons.com/publon/31750256/.
    10.1016/J.IFACOL.2019.11.399
  49. Romero, David; Gaiardelli, Paolo; Powell, Daryl; Wuest, Thorsten; Thurer, Matthias. "Rethinking Jidoka Systems under Automation & Learning Perspectives in the Digital Lean Manufacturing World". IFAC-PapersOnLine (2019): https://publons.com/publon/31416263/.
    10.1016/J.IFACOL.2019.11.309
  50. Romero, David; Gaiardelli, Paolo; Thurer, Matthias; Powell, Daryl; Wuest, Thorsten. "Cyber-Physical Waste Identification and Elimination Strategies in the Digital Lean Manufacturing World". IFIP Advances in Information and Communication Technology (2019): https://publons.com/publon/31416262/.
    10.1007/978-3-030-30000-5_5
  51. Romero, David; Gaiardelli, Paolo; Powel, Daryl; Wuest, Thorsten; Thurer, Matthias. "Total Quality Management and Quality Circles in the Digital Lean Manufacturing World". IFIP Advances in Information and Communication Technology (2019): https://publons.com/publon/31416261/.
    10.1007/978-3-030-30000-5_1
  52. Negrao, Leony Luis Lopes; Godinho Filho, Moacir; Ganga, Gilberto Miller Devos; Chopra, Sunil; Thurer, Matthias; Sacomano Neto, Mario; Marodin, Giuliano Almeida. "Lean manufacturing implementation in regions with scarce resources A survey in the Amazon Region of Brazil". Management Decision (2019): https://publons.com/publon/30279951/.
    10.1108/MD-10-2018-1082
  53. Zhang, K.; Qu, T.; Zhou, D.; Thürer, M.; Liu, Y.; Nie, D.; Li, C.; et al. "IoT-enabled dynamic lean control mechanism for typical production systems". Journal of Ambient Intelligence and Humanized Computing 10 3 (2019): 1009-1023. http://www.scopus.com/inward/record.url?eid=2-s2.0-85053267085&partnerID=MN8TOARS.
    10.1007/s12652-018-1012-z
  54. Sarmiento, R.; Whelan, G.; Thurer, M.; Bribiescas-Silva, F.A.. "Fifty Years of the Strategic Trade-Offs Model: In Memory and Honor of Wickham Skinner". IEEE Engineering Management Review 47 2 (2019): 92-96. http://www.scopus.com/inward/record.url?eid=2-s2.0-85065958682&partnerID=MN8TOARS.
    10.1109/EMR.2019.2915978
  55. Kodama, T.K.; Thürer, M.; Filho, M.G.; Tatiana Kimura Kodama; Matthias Thürer; Moacir Godinho Filho. "Application of a diagnostic framework based on the concepts of workload control to identify the problems related to the delivery reliability in a company of the aeronautical maintenance sector". Gestao e Producao 26 4 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85072800966&partnerID=MN8TOARS.
    10.1590/0104-530X3672-19
  56. Thurer, Matthias; Stevenson, Mark. "Bottleneck-oriented order release with shifting bottlenecks: An assessment by simulation". International Journal of Production Economics 197 (2018): 275-282. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000425575600021&KeyUID=WOS:000425575600021.
    10.1016/j.ijpe.2018.01.010
  57. Thurer, Matthias; Tomasevic, Ivan; Stevenson, Mark; Qu, Ting; Huisingh, Don. "A systematic review of the literature on integrating sustainability into engineering curricula". Journal of Cleaner Production 181 (2018): 608-617. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000428483100054&KeyUID=WOS:000428483100054.
    10.1016/J.JCLEPRO.2017.12.130
  58. Gianiodis, Peter T.; Thurer, Matthias. "THE IMPACT OF GOVERNMENT INTERVENTION ON TECHNOLOGICAL REGIMES: THE SOURCING OF FINANCIAL INNOVATION". International Journal of Innovation Management 22 3 (2018): http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000428948700004&KeyUID=WOS:000428948700004.
    10.1142/S1363919618500251
  59. Thurer, Matthias. "Dual Resource Constrained (DRC) Shops: Literature Review and Analysis". IFIP Advances in Information and Communication Technology (2018): https://publons.com/publon/31750257/.
    10.1007/978-3-319-99704-9_10
  60. Romero, David; Gaiardelli, Paolo; Powell, Daryl; Wuest, Thorsten; Thurer, Matthias. "Digital Lean Cyber-Physical Production Systems: The Emergence of Digital Lean Manufacturing and the Significance of Digital Waste". IFIP Advances in Information and Communication Technology (2018): https://publons.com/publon/31416274/.
    10.1007/978-3-319-99704-9_2
  61. Thurer, Matthias; Stevenson, Mark. "On the beat of the drum: improving the flow shop performance of the Drum-Buffer-Rope scheduling mechanism". International Journal of Production Research 56 9 (2018): 3294-3305. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000434401700016&KeyUID=WOS:000434401700016.
    10.1080/00207543.2017.1401245
  62. Thurer, Matthias; Fernandes, Nuno O.; Carmo-Silva, Silvio; Stevenson, Mark. "Lot splitting under load-limiting order release in high-variety shops: An assessment by simulation". Journal of Manufacturing Systems 48 (2018): 63-72. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000447484100006&KeyUID=WOS:000447484100006.
    10.1016/J.JMSY.2018.06.003
  63. Sarmiento, Roberto; Whelan, Garvan; Thurer, Matthias. "A note on "beyond the trade-off and cumulative capabilities models: alternative models of operations strategy'". International Journal of Production Research 56 12 (2018): 4368-4375. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000441264800018&KeyUID=WOS:000441264800018.
    10.1080/00207543.2018.1428773
  64. Thürer, M.; Tomaševic, I.; Stevenson, M.; Fredendall, L.D.; Protzman, C.W.. "On the meaning and use of excellence in the operations literature: a systematic review". Total Quality Management and Business Excellence (2018): 1-28. http://www.scopus.com/inward/record.url?eid=2-s2.0-85041587436&partnerID=MN8TOARS.
    10.1080/14783363.2018.1434770
  65. Thurer, Matthias; Fernandes, Nuno O.; Carmo-Silva, Silvio; Stevenson, Mark. "Improving performance in POLCA controlled high variety shops: An assessment by simulation". Journal of Manufacturing Systems 44 (2017): 143-153. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000411531700010&KeyUID=WOS:000411531700010.
    10.1016/J.JMSY.2017.05.006
  66. Thurer, Matthias; Avittathur, Balram. "How do Indian firms source from China? Implications on cross-border supply chain management". Decision 44 4 (2017): 247-258. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000415972000002&KeyUID=WOS:000415972000002.
    10.1007/S40622-017-0164-6
  67. Thuerer, Matthias; Fernandes, Nuno O.; Stevenson, Mark; Qu, Ting. "On the backlog-sequencing decision for extending the applicability of ConWIP to high-variety contexts: an assessment by simulation". International Journal of Production Research 55 16 (2017): 4695-4711. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000402042400009&KeyUID=WOS:000402042400009.
    10.1080/00207543.2017.1281462
  68. Qu, Ting; Pan, Yanghua; Liu, Xuan; Kang, Kai; Li, Congdong; Thurer, Matthias; Huang, George Q.. "Internet of Things-based real-time production logistics synchronization mechanism and method toward customer order dynamics". Transactions of the Institute of Measurement and Control 39 4 (2017): 429-445. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000400198700006&KeyUID=WOS:000400198700006.
    10.1177/0142331217691218
  69. Thurer, Matthias; Land, Martin J.; Stevenson, Mark; Fredendall, Lawrence D.. "On the integration of due date setting and order release control". Production Planning & Control 28 5 (2017): 420-430. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000400000400005&KeyUID=WOS:000400000400005.
    10.1080/09537287.2017.1302102
  70. Thurer, Matthias; Stevenson, Mark; Silva, Cristovao; Qu, Ting. "Drum-buffer-rope and workload control in High-variety flow and job shops with bottlenecks: An assessment by simulation". International Journal of Production Economics 188 (2017): 116-127. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000401381300011&KeyUID=WOS:000401381300011.
    10.1016/j.ijpe.2017.03.025
  71. Thuerer, Matthias; Qu, Ting; Stevenson, Mark; Li, Cong Dong; Huang, George Q.. "Deconstructing bottleneck shiftiness: the impact of bottleneck position on order release control in pure flow shops". Production Planning & Control 28 15 (2017): 1223-1235. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000409188700003&KeyUID=WOS:000409188700003.
    10.1080/09537287.2017.1362486
  72. Fernandes, Nuno O.; Thurer, Matthias; Silva, Cristovao; Carmo-Silva, Silvio. "Improving workload control order release: Incorporating a starvation avoidance trigger into continuous release". International Journal of Production Economics 194 (2017): 181-189. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000419413100017&KeyUID=WOS:000419413100017.
    10.1016/j.ijpe.2016.12.029
  73. Thurer, Matthias; Stevenson, Mark; Sarmiento, Roberto; Gianiodis, Peter. "On strategic trade-offs: does the principle of energy conservation explain the trade-offs law?". Management Research Review 40 11 (2017): 1163-1174. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000416322800002&KeyUID=WOS:000416322800002.
    10.1108/MRR-09-2016-0214
  74. Thurer, Matthias; Tomasevic, Ivan; Stevenson, Mark. "On the meaning of 'Waste': review and definition". Production Planning & Control 28 3 (2017): 244-255. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000396777600006&KeyUID=WOS:000396777600006.
    10.1080/09537287.2016.1264640
  75. Qu, Ting; Thurer, Matthias; Wang, Junhao; Wang, Zongzhong; Fu, Huan; Li, Congdong; Huang, George Q.. "System dynamics analysis for an Internet-of-Things-enabled production logistics system". International Journal of Production Research 55 9 (2017): 2622-2649. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000398966800013&KeyUID=WOS:000398966800013.
    10.1080/00207543.2016.1173738
  76. Qu, T.; Nie, D. X.; Li, C. D.; Thurer, Matthias; Huang, George Q.. "Optimal configuration of assembly supply chains based on Hybrid augmented Lagrangian coordination in an industrial cluster". Computers & Industrial Engineering 112 (2017): 511-525. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000413126700043&KeyUID=WOS:000413126700043.
    10.1016/j.cie.2017.03.003
  77. Thurer, Matthias; Stevenson, Mark; Protzman, Charles W.. "Card-based production control: a review of the control mechanisms underpinning Kanban, ConWIP, POLCA and COBACABANA systems". Production Planning & Control 27 14 (2016): 1143-1157. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000382255700002&KeyUID=WOS:000382255700002.
    10.1080/09537287.2016.1188224
  78. Thurer, Matthias; Stevenson, Mark; Thuerer, Matthias; Land, Martin J.; Fredendall, Lawrence D.. "Card-based delivery date promising in pure flow shops with order release control". International Journal of Production Research 54 22 (2016): 6798-6811. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000386426300010&KeyUID=WOS:000386426300010.
    10.1080/00207543.2016.1177672
  79. Sarmiento, Roberto; Thurer, Matthias; Whelan, Garvan. "Rethinking Skinner's model: strategic trade-offs in products and services". Management Research Review 39 10 (2016): 1199-1213. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000391151000003&KeyUID=WOS:000391151000003.
    10.1108/MRR-02-2015-0042
  80. Silva, Cristovao; Ferreira, Luis Miguel; Thurer, Matthias; Stevenson, Mark. "Improving the logistics of a constant order-cycle kanban system". Production Planning & Control 27 7-8 (2016): 650-659. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000379553400010&KeyUID=WOS:000379553400010.
    10.1080/09537287.2016.1165302
  81. Thuerer, Matthias; Stevenson, Mark; Land, Martin J.. "On the integration of input and output control: Workload Control order release". International Journal of Production Economics 174 (2016): 43-53. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000372562500004&KeyUID=WOS:000372562500004.
    10.1016/j.ijpe.2016.01.005
  82. Thurer, Matthias; Stevenson, Mark; Qu, Ting. "Job sequencing and selection within workload control order release: an assessment by simulation". International Journal of Production Research 54 4 (2016): 1061-1075. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000375207600007&KeyUID=WOS:000375207600007.
    10.1080/00207543.2015.1047978
  83. Thurer, Matthias; Stevenson, Mark. "Workload control in job shops with re-entrant flows: an assessment by simulation". International Journal of Production Research 54 17 (2016): 5136-5150. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000380169900007&KeyUID=WOS:000380169900007.
    10.1080/00207543.2016.1156182
  84. Thuerer, Matthias; Godinho Filho, Moacir; Stevenson, Mark; Fredendall, Lawrence. "Small and Medium Sized Manufacturing Companies in Brazil: Is Innovativeness a Key Competitive Capability to Develop?". Acta Scientiarum-Technology 37 3 (2015): 379-387. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000360381000009&KeyUID=WOS:000360381000009.
    10.4025/ACTASCITECHNOL.V37I3.26531
  85. Thuerer, Matthias; Stevenson, Mark; Qu, Ting. "Simple subcontracting rules for make-to-order shops with limited subcontractor capacity: an assessment by simulation". Production Planning & Control 26 13 (2015): 1145-1161. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000359722300006&KeyUID=WOS:000359722300006.
    10.1080/09537287.2015.1019590
  86. Land, Martin J.; Stevenson, Mark; Thurer, Matthias; Gaalman, Gerard J. C.. "Job shop control: In search of the key to delivery improvements". International Journal of Production Economics 168 (2015): 257-266. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000361261000022&KeyUID=WOS:000361261000022.
    10.1016/j.ijpe.2015.07.007
  87. Godinho Filho, Moacir; Boschi, Artur; Rentes, Antonio Freitas; Thurer, Matthias; Bertani, Thiago Moreno. "Improving Hospital Performance by Use of Lean Techniques: An Action Research Project in Brazil". Quality Engineering 27 2 (2015): 196-211. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000353507600007&KeyUID=WOS:000353507600007.
    10.1080/08982112.2014.942039
  88. Thuerer, Matthias; Land, Martin J.; Stevenson, Mark; Fredendall, Lawrence D.; Godinho Filho, Moacir. "Concerning Workload Control and Order Release: The Pre-Shop Pool Sequencing Decision". Production and Operations Management 24 7 (2015): 1179-1192. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000357834000010&KeyUID=WOS:000357834000010.
    10.1111/poms.12304
  89. Thuerer, Matthias; Stevenson, Mark; Protzman, Charles W.. "COBACABANA (Control of Balance by Card Based Navigation): An alternative to kanban in the pure flow shop?". International Journal of Production Economics 166 (2015): 143-151. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000357238500013&KeyUID=WOS:000357238500013.
    10.1016/j.ijpe.2015.05.010
  90. Silva, Cristovao; Stevenson, Mark; Thurer, Matthias. "A case study of the successful implementation of workload control A practitioner-led approach". Journal of Manufacturing Technology Management 26 2 (2015): 280-296. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000374158800008&KeyUID=WOS:000374158800008.
    10.1108/JMTM-10-2013-0144
  91. Thuerer, Matthias; Stevenson, Mark; Qu, Ting; Filho, Moacir Godinho. "The design of simple subcontracting rules for make-to-order shops: An assessment by simulation". European Journal of Operational Research 239 3 (2014): 854-864. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000341469100023&KeyUID=WOS:000341469100023.
    10.1016/j.ejor.2014.06.018
  92. Land, Martin; Stevenson, Mark; Thuerer, Matthias. "Integrating load-based order release and priority dispatching". International Journal of Production Research 52 4 (2014): 1059-1073. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000329900000009&KeyUID=WOS:000329900000009.
    10.1080/00207543.2013.836614
  93. Thuerer, Matthias; Stevenson, Mark; Silva, Cristovao; Land, Martin J.; Fredendall, Lawrence D.; Melnyk, Steven A.. "Lean Control for Make-to-Order Companies: Integrating Customer Enquiry Management and Order Release". Production and Operations Management 23 3 (2014): 463-476. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000332771800012&KeyUID=WOS:000332771800012.
    10.1111/POMS.12058
  94. Thuerer, Matthias; Qu, Ting; Stevenson, Mark; Maschek, Thomas; Godinho Filho, Moacir. "Continuous workload control order release revisited: an assessment by simulation". International Journal of Production Research 52 22 (2014): 6664-6680. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000343419100008&KeyUID=WOS:000343419100008.
    10.1080/00207543.2014.907514
  95. Thuerer, Matthias; Silva, Cristovao; Stevenson, Mark; Land, Martin. "Controlled order release: a performance assessment in job shops with sequence-dependent set-up times". Production Planning & Control 25 7 (2014): 603-615. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000333877200005&KeyUID=WOS:000333877200005.
    10.1080/09537287.2012.735801
  96. Thuerer, Matthias; Land, Martin J.; Stevenson, Mark. "Card-based workload control for job shops: Improving COBACABANA". International Journal of Production Economics 147 (2014): 180-188. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000329880100020&KeyUID=WOS:000329880100020.
    10.1016/j.ijpe.2013.09.015
  97. Thuerer, Matthias; Godinho Filho, Moacir; Stevenson, Mark; Fredendall, Lawrence D.. "Small manufacturers in Brazil: competitive priorities vs. capabilities". International Journal of Advanced Manufacturing Technology 74 9-12 (2014): 1175-1185. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000343048300003&KeyUID=WOS:000343048300003.
    10.1007/S00170-014-6042-X
  98. Thuerer, Matthias; Stevenson, Mark; Silva, Cristovao; Land, Martin. "Towards an Integrated Workload Control (WLC) Concept: The Performance of Due Date Setting Rules in Job Shops with Contingent Orders". International Journal of Production Research 51 15 (2013): 4502-4516. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000322808100006&KeyUID=WOS:000322808100006.
    10.1080/00207543.2013.774485
  99. Thuerer, Matthias; Stevenson, Mark; Silva, Cristovao; Land, Martin; Godinho Filho, Moacir. "Workload control and order release in two-level multi-stage job shops: an assessment by simulation". International Journal of Production Research 51 3 (2013): 869-882. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000313036700015&KeyUID=WOS:000313036700015.
    10.1080/00207543.2012.676685
  100. Thuerer, Matthias; Godinho Filho, Moacir; Stevenson, Mark; Fredendall, Lawrence D.. "Competitive priorities of small manufacturers in Brazil". Industrial Management & Data Systems 113 6 (2013): 856-874. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000320902800005&KeyUID=WOS:000320902800005.
    10.1108/IMDS-01-2013-0049
  101. Thuerer, Matthias; Godinho Filho, Moacir; Stevenson, Mark. "Coping with finite storage space in job shops through order release control: an assessment by simulation". International Journal of Computer Integrated Manufacturing 26 9 (2013): 830-838. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000323146300002&KeyUID=WOS:000323146300002.
    10.1080/0951192X.2013.799779
  102. Thuerer, Matthias; Silva, Cristovao; Stevenson, Mark; Land, Martin. "Improving the applicability of workload control (WLC): the influence of sequence-dependent set-up times on workload controlled job shops". International Journal of Production Research 50 22 (2012): 6419-6430. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000310597900015&KeyUID=WOS:000310597900015.
    10.1080/00207543.2011.648275
  103. Thurer, Matthias; Godinho Filho, Moacir. "Redução do lead time e entregas no prazo em pequenas e médias empresas que fabricam sob encomenda: a abordagem Worload Control (WLC) para o Planejamento e Controle da Produção (PCP)". Gestão & Produção 19 1 (2012): 43-58. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=SCIELO&KeyUT=SCIELO:S0104-530X2012000100004&KeyUID=SCIELO:S0104-530X2012000100004.
    10.1590/S0104-530X2012000100004
  104. Thuerer, Matthias; Stevenson', Mark; Silva, Cristovao; Land, Martin J.; Fredendall, Lawrence D.. "Workload Control and Order Release: A Lean Solution for Make-to-Order Companies". Production and Operations Management 21 5 (2012): 939-953. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000308995100009&KeyUID=WOS:000308995100009.
    10.1111/J.1937-5956.2011.01307.X
  105. Thuerer, Matthias; Stevenson, Mark; Silva, Cristovao; Huang, George. "The application of workload control in assembly job shops: an assessment by simulation". International Journal of Production Research 50 18 (2012): 5048-5062. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000309687700008&KeyUID=WOS:000309687700008.
    10.1080/00207543.2011.631600
  106. Thuerer, Matthias; Huang, George; Stevenson, Mark; Silva, Cristovao; Godinho Filho, Moacir. "The performance of Due Date setting rules in assembly and multi-stage job shops: an assessment by simulation". International Journal of Production Research 50 20 (2012): 5949-5965. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000310595700020&KeyUID=WOS:000310595700020.
    10.1080/00207543.2011.638942
  107. Thurer, M.; Filho, M.G.. "Lead time reduction and improved tardiness performance in small and medium sized Make-to-Order companies: The Workload Control (WLC) approach, a solution for Production Planning and Control (PPC),Redução do lead time e entregas no prazo em pequenas e médias empresas que fabricam sob encomenda: A abordagem Worload Control (WLC) para o Planejamento e Controle da Produção (PCP)". Gestao e Producao 19 1 (2012): 43-58. http://www.scopus.com/inward/record.url?eid=2-s2.0-84860467332&partnerID=MN8TOARS.
    10.1590/s0104-530x2012000100004
  108. Thuerer, Matthias; Stevenson, Mark; Silva, Cristovao. "Three decades of workload control research: a systematic review of the literature". International Journal of Production Research 49 23 (2011): 6905-6935. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000299896800001&KeyUID=WOS:000299896800001.
    10.1080/00207543.2010.519000
  109. Thuerer, Matthias; Silva, Cristovao; Stevenson, Mark. "Optimising workload norms: the influence of shop floor characteristics on setting workload norms for the workload control concept". International Journal of Production Research 49 4 (2011): 1151-1171. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000285199300011&KeyUID=WOS:000285199300011.
    10.1080/00207541003604836
  110. Thuerer, Matthias; Silva, Cristovao; Stevenson, Mark. "Workload control release mechanisms: from practice back to theory building". International Journal of Production Research 48 12 (2010): 3593-3617. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000276471900012&KeyUID=WOS:000276471900012.
    10.1080/00207540902922810
Capítulo de livro
  1. Fernandes, Nuno O.; Thurer, Matthias; Stevenson, Mark; Carmo Silva, S.. "Load-Based POLCA: An Assessment of the Load Accounting Approach". 397-405. 2017.
    10.1007/978-3-319-56538-5_40
  2. Chen, Bingzhu; Qu, Ting; Thurer, Matthias; Huang, George Q.; Li, Congdong; Xu, Suxiu; IEEE. "Warehouse Workload Control for Production Logistic". 237-242. 2017.
    10.1109/COASE.2017.8256109
Livro
  1. Thürer, Matthias; Mark Stevenson; Charles W. Protzman. (Chinese) Card-based Control Systems for a Lean Work Design. China: China Machine Press. 2018.
  2. Thürer, Matthias; Mark Stevenson; Charles W. Protzman. Sistemas de Controle baseados em cartão para um Work Design Enxuto: as bases do Kanban, ConWIP, POLCA e COBACABANA. Brasil: Editora da Universidade Federal de São Carlos. 2018.
  3. Thürer, Matthias; Mark Stevenson; Charles W. Protzman; Thürer, M.; Stevenson, M.; Protzman, C.. Card-based Control Systems for a Lean Work Design: The Fundamentals of Kanban, ConWIP, POLCA and COBACABANA. Estados Unidos: Productivity Press. 2016.
    10.1201/b19735
  4. Thürer, Matthias; Mark Stevenson; Charles W. Protzman. Kartenbasierte Produktionskontrolle für die schlanke Produktion – Grundlagen von Kanban, ConWIP, POLCA und COBACABANA. Alemanha: Springer. 2016.
  5. Fredendall, Lawrence D.; Thürer, Matthias. An Introduction to Lean Work Design (Volume 2): Standard Practices and Tools of Lean. Estados Unidos: Business Expert Press. 2016.
  6. Fredendall, Lawrence D.; Thürer, Matthias. An Introduction to Lean Work Design (Volume 1): Fundamentals of Lean Operations. Estados Unidos: Business Expert Press. 2016.
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2019/11/07 Keynote: Towards Business Excellence: The Importance of Strategy Deployment (Hoshin Kanri) and Industry 4.0 12th Conference of Business and Science (SPIN'19) in Belgrade (Serbia)
2019/08/24 Keynote: China Belt and Road Initiative (BRI): Implications for Global Supply Chain Management 26th International Conference on Industrial Engineering and Engineering Management (IE&EM 2019) in Ma’anshan (P.R. China)
2015/11/07 Keynote: Management Cybernetics: What can Industry 4.0 learn from card-based control systems? 22nd International Conference on Industrial Engineering and Engineering Management (IE&EM 2015) in Guangzhou (P.R. China)

Orientação

Título / Tema
Papel desempenhado 		Curso (Tipo)
Instituição / Organização
2021/09/01 - Atual Optimization Models for Food Supply Chains: An Assessment
Orientador
Jinan University, China
2021/09/01 - Atual Artificial Intelligence for Order Release
Orientador
Jinan University, China
2020/09/01 - Atual Optimization based order release revisited
Orientador
Jinan University, China
2020/09/01 - Atual Automated Guided Vehicle Dispatching: An Assessment
Orientador
Jinan University, China
2018/09/01 - Atual Workload Control in Dual Resource Constrained Systems
Orientador
Jinan University, China
2018/09/01 - 2021/07/31 Research on integrated optimal configuration of inventory and online order fulfillment in omni-channel supply chain
Orientador
Jinan University, China
2017/09/01 - 2020/07/31 Research on "Location-Inventory" Optimization Problem for Dual-Channel Multi-echelon Distribution Network
Orientador
Jinan University, China

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação) 		Instituição / Organização
2022/04/21 - 2022/04/25 Track Chair Operational Excellence Track POMS Conference (2022/04/21 - 2022/04/25)
Conferência (Outra)
2020/11/20 - 2020/11/22 Organizing Committee of the 11th Forum for the Council of Chinese Industrial Engineering and Logistics Management Department Heads (CIEDH2020) & the International Conference for Chinese Scholars in Industrial Engineering (CSIE2020), Zhuhai, P.R. China (2020/11/20)
Conferência (Membro da Comissão Organizadora)
2019/05/28 - 2019/05/31 Program committee co-chair of the 11th CIRP Conference on Industrial Product-Service Systems (IPS2), Zhuhai and Hong Kong, P.R. China (2019/05/28)
Conferência (Membro da Comissão Organizadora)
2018/03/27 - 2018/03/29 Organizing committee of the 15th IEEE International Conference on Networking, Sensing and Control (ICNSC), Zhuhai, P.R. China (2018/03/27)
Conferência (Membro da Comissão Organizadora)

Júri de grau académico

Tema
Tipo de participação 		Nome do candidato (Tipo de grau)
Instituição / Organização
2021/03/05 Alternatives and complements to POLCA system in QRM cells configuration: simulated experiments Fernando Paredes (Doutoramento)
Universidade Federal de São Carlos, Brasil
2019/12/03 Card-based systems: Systematic literature review of new systems and proposal of a list of soft factors for systems implementation Gustavo Bagni (Mestrado)
Universidade Federal de São Carlos, Brasil
2019/12/03 Dual Resource Constrained em sistemas de producao industrial: estudo de simulacao Filipe Archer Côrte-Real Rodrigues (Mestrado)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017/10/19 Ein Beitrag zur modellbasierten Zielkaskadierung in Produktionssystemen Thomas Maschek (Doutoramento)
Technical University Dortmund, Alemanha

Arbitragem científica em conferência

Nome da conferência Local da conferência
2021/09/06 - 2021/09/09 APMS - Advances on Production Management Systems
2021/07/05 - 2021/07/08 EUROMA - European Operations Management Association

Arbitragem científica em revista

Nome da revista (ISSN) Editora
2021/08/01 - Atual Academy of Management Perspectives
2016/01/01 - Atual Journal of Industrial and Production Engineering
2013/01/01 - Atual Quality Management Journal

Curso / Disciplina lecionado

Disciplina Curso (Tipo) Instituição / Organização
2019/09/01 - Atual Management Science and Engineering Theories & Methods; 20 hours in the summer semester (Doktor (PhD))
2019/02/01 - Atual Discrete Event Simulation with SIMIO & Tutorial; 40hrs plus 40hrs in the winter semester (Bachelor)
2018/09/01 - Atual Introduction to Production Control; 40 hours in the summer semester (Bachelor)

Membro de associação

Nome da associação Tipo de participação
2019/09/01 - Atual IFIP Working Group 5.7 on Advances on Production Management Systems (APMS) canditate member
2018/01/01 - Atual European Operations Management Association (EurOMA) Member
2011/01/01 - Atual Production and Operations Management Society (POMS) Member

Outro júri / avaliação

Descrição da atividade Instituição / Organização
2012/12/11 - Atual Ad hoc reviewer for Computers & Industrial Engineering; International Journal of Operations & Production Management; International Journal of Production Economics; International Journal of Production Research; International Journal of Computer Integrated Manufacturing; Journal of Manufacturing Systems; Journal of Operations Management; Production & Operations Management; Production Planning & Control; OMEGA among others
Distinções

Prémio

2020 10 Best Researcher Jinan University in 2019
Jinan University, China
2019 Guangdong Cooperation Award
2018 Editor Award for Excellence in Reviewing; International Journal of Production Economics
2016 Shingo Research and Professional Publication Award
2015 Zhuhai Distinguished Scholar

Título

2017 Pearl River Scholar

Outra distinção

2019 Highly Commented Paper, EUROMA Nigel Slack Teaching Award